Immortalizer clone from FT

[dwcraig1]

Hum, I got a rainbow heaven oddy clone. Not sure if that will have the same size one or not. Can't seem to find thin o-rings anywhere.

:: sent from android with tapatalk ::

not the same, those are 16 x 1 mm. (actually that's Ithaka's tank o-ring size, Oddy is probably 16 x 1.5 mm)
I'll take a shot at measuring it, it's X x 1mm, let me find out what is "X"
I come up with 12 x 1 mm, the one I used is silicone but I think a buna would work just the same(fit wise)
maybe, maybe not as in do they fit? http://www.ebay.com/itm/Metric-Buna...ic_Hydraulic_Valves_Parts&hash=item2ebd6d7163

 

[Kemosabe]

@ dwcraig1: That's the second report I've read about stripped screws. Let's hope the FT puts some pressure on their supplier to up their quality control a little. I'm really hoping I can get mine airy enough when I get it. My 804s are airy as all get out and that's what I've got used too and what I prefer now.

you dont see much talk (well i dont) about the 804s. i have one and i think its great. trapping the leads under the screws is tough, but once you do boy is it a great vape. took a while to get the hang of the airyness but again, once i did, Boom. got a cotton micro in there and this little atty performs fantastically. it was gifted to me (score!) so the material being SS was just pure icing on the cake. got one of the mflux drip tip clones on there and the whole thing sits on a slant-top KTS- it looks pretty badass imo.

 

[Gummy Bare]

not the same, those are 16 x 1 mm. (actually that's Ithaka's tank o-ring size, Oddy is probably 16 x 1.5 mm)
I'll take a shot at measuring it, it's X x 1mm, let me find out what is "X"
I come up with 12 x 1 mm, the one I used is silicone but I think a buna would work just the same(fit wise)
maybe, maybe not as in do they fit? http://www.ebay.com/itm/Metric-Buna...ic_Hydraulic_Valves_Parts&hash=item2ebd6d7163

The 12mm you got is the outer diameter? So where looking at something like 12mm OD x 10mm ID x 1mm C/S?

:: sent from android with tapatalk ::

 

[dwcraig1]

The 12mm you got is the outer diameter? So where looking at something like 12mm OD x 10mm ID x 1mm C/S?

:: sent from android with tapatalk ::

12 inner(I.D.), 1 mm thickness, 14 outer(O.D.)

 

[dwcraig1]

not the same, those are 16 x 1 mm. (actually that's Ithaka's tank o-ring size, Oddy is probably 16 x 1.5 mm)
I'll take a shot at measuring it, it's X x 1mm, let me find out what is "X"
I come up with 12 x 1 mm, the one I used is silicone but I think a buna would work just the same(fit wise)
maybe, maybe not as in do they fit? Metric Buna Orings 12 x 1mm Price for 50pcs | eBay

Use the link a scroll down for size decription

 

[JD1]

not the same, those are 16 x 1 mm. (actually that's Ithaka's tank o-ring size, Oddy is probably 16 x 1.5 mm)
I'll take a shot at measuring it, it's X x 1mm, let me find out what is "X"
I come up with 12 x 1 mm, the one I used is silicone but I think a buna would work just the same(fit wise)
maybe, maybe not as in do they fit? Metric Buna Orings 12 x 1mm Price for 50pcs | eBay

Wouldn't you want 10 x 1 and stretch it on or is that a bad idea?

 

[dwcraig1]

Still have to stretch the 12 x 1

 

[dwcraig1]

you dont see much talk (well i dont) about the 804s. i have one and i think its great. trapping the leads under the screws is tough, but once you do boy is it a great vape. took a while to get the hang of the airyness but again, once i did, Boom. got a cotton micro in there and this little atty performs fantastically. it was gifted to me (score!) so the material being SS was just pure icing on the cake. got one of the mflux drip tip clones on there and the whole thing sits on a slant-top KTS- it looks pretty badass imo.

Is this the 804?

 

[JD1]

Is this the 804?

That's it.

 

[Plumes.91]

Dude, I gotta get one of these. Thanks for the heads up on it being on the site. In the wishlist it goes!

 

[JD1]

Still have to stretch the 12 x 1

Aha! Many, many thanks for searching that info out and posting it for us. And vape on.

 

[JD1]

you dont see much talk (well i dont) about the 804s. i have one and i think its great. trapping the leads under the screws is tough, but once you do boy is it a great vape. took a while to get the hang of the airyness but again, once i did, Boom. got a cotton micro in there and this little atty performs fantastically. it was gifted to me (score!) so the material being SS was just pure icing on the cake. got one of the mflux drip tip clones on there and the whole thing sits on a slant-top KTS- it looks pretty badass imo.

Hey Kemosabe, if you have the time, please copy/paste your reply over in the 804 thread. I'd like to compare notes on a couple of things.
http://www.e-cigarette-forum.com/fo...one-aka-dream-bt804-tank-36.html#post10342464

 

[dwcraig1]

Is this the 804?

Should I post how I fill mine with out leaking? It was posted in the 804 thread a long time ago.

 

[JD1]

Should I post how I fill mine with out leaking? It was posted in the 804 thread a long time ago.

I'd say repost it in that thread if you want to. Threads get so long that a lot of good info gets buried.

 

[Gummy Bare]

Is that 804 some high end atty, or something from FT?

:: sent from android with tapatalk ::

 

[dwcraig1]

Dream BT 804 Rebuildable Tank
They can be found cheaper, it's a Kayfun like atomizer, it works quite well.

 

[JD1]

That's the older version, chrome plated brass, which is what I have. The v2 is stainless but they're not that easy to find.

http://www.e-cigarette-forum.com/fo...lone-aka-dream-bt804-tank-23.html#post9379819

 

[Kemosabe]

Is this the 804?

I guess that's the 804 tank.
I have the 804 dripper. This:

http://www.discountvapers.com/productimage.php?product_id=1524

http://www.discountvapers.com/dream-bt801-rebuildable-atomizer/

Whoops I guess it's called the 801. 801 dream is the dripper and 804 dream is the tank. Thought they were the same number.

 

[peterforpats]

wrong post...........

 

[kantoot]

So that eBay link to that o-ring will fit this clone by just stretching it? Can someone confirm?