iTaste MVP v2 Owners Group

[sando7]

need to say if you buy some VG to dilute your store bought jooze a bit, never go more than 50/50 if you plan on using a tank set-up.....if it's to thick it will not wick properly in any kind of tank-set-up.

this Diluting process is mainly used for "Dripping" and it doesn't effect the taste a bit.

this process works this way: "will work in tanks @ 50/50"
if buying store-bought jooze, try to purchase at a place that will offer you to decide your own ratios, if so purchase 100% PG jooze and get double the Nic you usually use.........pick up some USP grade Glycerin (VG) at Wally-World, go home and cut your Jooze in 1/2 with the VG and you have double the amount you bought and you have also just cut the Nic in 1/2 also.....@ 50/50 mix

found in the Pharmacy section @ Wally-World, 180ml bottle
http://www.walmart.com/ip/Humco-Glycerin-USP-Skin-Protectant-6-oz/10417582#Product+Reviews

 

[garyoa1]

need to say if you buy some VG to dilute your store bought jooze a bit, never go more than 50/50 if you plan on using a Tank set-up.....if it's to thick it will not wick properly in any kind of Tank-set-up.

this Diluting process is mainly used for "Dripping" and it doesn't effect the taste a bit.

Anudder... "it dependz"! My ADV is 100% VG. Wicks just fine in my i30. No difference at all compared to another mix.

 

[sando7]

usually problems arise above 50/50 in Tanks you ole Nit-Picker, ask keir about it........my suggestion on Ratio is not a golden rule just a nice safety zone to avoid any problems that might arise

 

[garyoa1]

usually problems arise above 50/50 in Tanks you ole Nit-Picker, ask keir about it........my suggestion on Ratio is not a golden rule just a nice safety zone to avoid any problems that might arise

I'll pick muh Nitz whenever I want! So there!!!

 

[clnire]

these things are great for trying diff flavors, just screw into your MVP and drip in a few drops and Vape

510 Dual Coil Atomizers

510 Atomizers

Those 510 atties are great for tasting flavors. In fact I am trying some new samples I got today as I type. Easy to clean-just run some hot water through them and blow through the 510 connection end. If you try a strong flavor, a couple hour plain vodka soak and good rinse and they are ready for next time.

 

[sando7]

..........@clnire, Innokin had some cheap plastic ones out for awhile for 1 buck apiece, Desert used to have-um but not now....wish i'd a bought more........they still might be out there somewhere..


edit: found some CelluCotton rite up the road (Sally Store), gonna pick up a box Monday morn for $11.49.....the Lady on the phone when i called was trippin out, asked me what i needed it for hehe!

 

[jandry]

usually problems arise above 50/50 in Tanks you ole Nit-Picker, ask keir about it........my suggestion on Ratio is not a golden rule just a nice safety zone to avoid any problems that might arise

This might explain some of the hell ive had trying to get my wick/coil configuration right. The one flavor I mentioned that I like is "Suicide Bunny Sucker Punch". Thing is, its 70%vg/30%pg.

As it happens, the one I mentioned I had steeping for a week is MUCH better now- so much so that I think I have 2 flavors to rotate with now. This juice (B&M store calls it "White Lightening") is 50/50, and it definitely wicks better. Ill have to see if I can find some other 50/50 mixes as I think its the best percentage overall. Im going to look into the links above so I have a dripper to use/try new flavors on.

Then Ill hit the B&M store and start trying flavors...

 

[clnire]

Thanks Sando, that is a great price!! Wish I had found them. I got mine here. I bought several packs so I am set for awhile. China company, so if you order be prepared for the wait. But they work great and I am still on the first batch I bought early last year. I still have about 8 unopened... they are metal, so they last a long time.

Note: DO NOT DRY BURN these attys! Just flush, blow and go!

EDIT Oops, helps to include the link:

http://www.chinabuye.com/5-pcs-gs-b...ul-electronic-cigarette-atomizer-random-color

 

[sando7]

Thanks Sando, that is a great price!! Wish I had found them. I got mine here. I bought several packs so I am set for awhile. China company, so if you order be prepared for the wait. But they work great and I am still on the first batch I bought early last year. I still have about 8 unopened... they are metal, so they last a long time.

Note: DO NOT DRY BURN these attys! Just flush, blow and go!

EDIT Oops, helps to include the link:

5 Pcs GS-Bridgeless 3-Hole Colorful Electronic Cigarette Atomizer - Random Color

on a different note, this is something i cannot believe and you might not either......last night i ordered an Anemia dripper for my mini Nemi from Slow-Tek....got up this am and had a shipping notice, i almost spit my coffee out......one thing i did different tho was to choose USPS shipping 8 to 12 days........now let's see how long it's in ILL in customs, that'll prob be the kicker.

 

[sando7]

This might explain some of the hell ive had trying to get my wick/coil configuration right. The one flavor I mentioned that I like is "Suicide Bunny Sucker Punch". Thing is, its 70%vg/30%pg.

As it happens, the one I mentioned I had steeping for a week is MUCH better now- so much so that I think I have 2 flavors to rotate with now. This juice (B&M store calls it "White Lightening") is 50/50, and it definitely wicks better. Ill have to see if I can find some other 50/50 mixes as I think its the best percentage overall. Im going to look into the links above so I have a dripper to use/try new flavors on.

Then Ill hit the B&M store and start trying flavors...

on that 70/30 mix if you think it's to thick one thing you can try, well a couple really,
add 1 drop of distilled water per ml to start, but no more than 2 drops max per ml of jooze.....or you can substitute Pure grain alc or high alc content vodka or you can just add some PG....worth a shot before throwing it away....or just save it for when you start dripping....and you will eventually.

 

[jandry]

on that 70/30 mix if you think it's to thick one thing you can try, well a couple really,
add 1 drop of distilled water per ml to start, but no more than 2 drops max per ml of jooze.....or you can substitute Pure grain alc or high alc content vodka or you can just add some PG....worth a shot before throwing it away....or just save it for when you start dripping....and you will eventually.

Good advice thanks- im fresh out of the 70/30mix so ill put that one in the bank for when I get it again.

 

[garyoa1]

on a different note, this is something i cannot believe and you might not either......last night i ordered an Anemia dripper for my mini Nemi from Slow-Tek....got up this am and had a shipping notice, i almost spit my coffee out......one thing i did different tho was to choose USPS shipping 8 to 12 days........now let's see how long it's in ILL in customs, that'll prob be the kicker.

Yeah. Free shipping = they have to fill a shipping container. Goes by boat.

Add the buck or two for USPS... goes out every day.

I always used post, after my initiial stab at free, see you in 37 years choice.

 

[sando7]

heck in 37 yrs i'll be long gone and if i ain't i prob wish i was......FT is alot like x-mass it only comes around once a yr, so any order that comes quickly if it be so is like Sanny Claus delivering early

 

[clnire]

edit: found some CelluCotton rite up the road (Sally Store), gonna pick up a box Monday morn for $11.49.....the Lady on the phone when i called was trippin out, asked me what i needed it for hehe!

Should just tell her you are buying it to share with your friends. To let them see what a great product it is! Don't have to say what we use the product for if you didn't want. Or really blow her mind. "Wicking material for my .4 ohm RDA (or the most tech one you can think of). To put on my (name the fancy mod with a wierd name) and blow clouds." (insert all technical terms you can think of) She would probably hang up on you - wouldn't know what the heck you were talking about!

And as for the CC, I do have some a wonderful fellow vaper sent me. For some things i really like it. But I still like KGD. Still experimenting. I vape a lot of NETs (naturally extracted tobacco) and they are coil gunkers (although filtering methods are getting better). I am finding, I think, the CC works better. Not sure yet.

 

[69CamaroSS]

these things are great for trying diff flavors, just screw into your MVP and drip in a few drops and Vape

510 Dual Coil Atomizers

510 Atomizers

Those 510 atties are great for tasting flavors. In fact I am trying some new samples I got today as I type. Easy to clean-just run some hot water through them and blow through the 510 connection end. If you try a strong flavor, a couple hour plain vodka soak and good rinse and they are ready for next time.

I got a few of these in various sizes and resistances. They come in standard and XL length as well as 1.5 and 3.0 Ohm. Best dripping 510 attys out there without spending as much as you did on your MOD (ahem HH357 ahem)!!! Unbridged, sealed 510 (I never use a shield and fill the crap out of them) and have beautiful micro (or nano?) coil inside them. Absolutely the best made ones out there in the $5-6 price range.
SmartVapes 510 Dripping Atomizer long Barrel 3ohm

 

[sando7]

yep there pretty good but nothin like a parallel coil @ 0.4 w/26ga on the Magma with the ole trustie Nemi, i'll take it any-day

edit: i just took a pull that fogged the whole room up, my ole ally cat headed for the door hehe, i got rid of his ... for awhile

 

[69CamaroSS]

these things are great for trying diff flavors, just screw into your MVP and drip in a few drops and Vape

510 Dual Coil Atomizers

510 Atomizers

Those 510 atties are great for tasting flavors. In fact I am trying some new samples I got today as I type. Easy to clean-just run some hot water through them and blow through the 510 connection end. If you try a strong flavor, a couple hour plain vodka soak and good rinse and they are ready for next time.

yep there pretty good but nothin like a parallel coil @ 0.4 w/26ga on the Magma with the ole trustie Nemi, i'll take it any-day

edit: i just took a pull that fogged the whole room up, my ole ally cat headed for the door hehe, i got rid of his ... for awhile

Yessir! Hence my purchase last week:

 

[sando7]

does that button get hot, you got magnets or a spring in that AR?

i got 2 more mec's in the mail now & 3 atty's

here's one from last month you might like

my first love

i call this one the "Widow Maker" it hit's like a beast

and "Ole Trusty"

the "Mountain Climber"

it just keeps going on and on, it never ends

 

[DoomiteAsh]

Well, I just pulled the trigger on my second vaping set-up! I bought a black grain MVP v2, a Pro Tank 3 mini (so I can finally get a bottle of Red Hot Candy juice from one of the local vape shops), and a "Pure" I-shaped red aluminum drip tip, all from 101Vape. Based on all the glowing reviews of the MVP v2 I've read and watched, I'm really looking forward to my first vape mail package!

Sent from my SGH-T679 using Tapatalk 2

My MVP came in the mail today! I actually got some red hot candy juice earlier in the day, thinking that I'd have to wait until Monday for my package to arrive from 101Vape, so it was a nice surprise to get the MVP today, let me tell ya! I'll definitely do business with 101Vape again, if everything they shop out comes in this quickly!

As far as the mod itself is concerned, so far I'm diggin' it. Took a look at the user guide to make sure I had the basics down, then screwed on my T3S with some Lucky Ruckus Leprechaun Nectar in it and took a couple pulls. Nice, warm, flavorful vape once I got the wattage set at 8 (2 ohm coil in that T3S according to the readout). Vapor output is pretty nice too. Then I filled up my new Protank 3 mini with the red hot candy juice and screwed it onto the MVP. I an now in love with that juice! I really liked it the first time I tried it at the vape shop, but the MVP makes it so much nicer than the ego battery I sampled the juice with! The coil on the Protank 3 reads 1.6 ohms on the MVP, and 8 watts seems to hit the sweet spot as far as warmth and flavor are concerned.

In conclusion, I'm tastin' it and I'm lovin' it! Let's see if I can get a picture of my new baby in here…

That's my cat Stiggy in the background, in case y'all are curious!

Sent from my SGH-T679 using Tapatalk 2

 

[sando7]

Pic's , Pic's, Pic's.......