iTaste MVP v2 Owners Group

Status
Not open for further replies.

lindsay1126

Senior Member
ECF Veteran
Verified Member
Oct 11, 2013
144
154
Near Seattle, WA
any luck with your i30... ?
Not really, I cut the tip down on the rubber thing in the tank. It is much better(not going to pass out to vape), but still isn't my favorite at all. I used it with my cinnamon danish (that I love in my halo) and it was just ok. My order was shipped from Vaper Alley for my kangert2's and vivi nova, so I am hoping for a better experience with them. I have been enjoying my KMPT2 with menthols and cooler vapes though. I think thats all I would put in a bottom coil as I really like my desserts & bakerys in a warm vape. I can get the KMPT2 to warm up but then the juice starts to taste burnt.
 

Johnnysb

Moved On
Sep 25, 2013
0
121
San Jose, CA
  • Deleted by classwife
  • Reason: Linkspammer

LovinTheVapor

Senior Member
ECF Veteran
Verified Member
Jan 20, 2010
219
253
Alpharetta, Ga
Thought everyone might enjoy looking at some special MVPs Innokin made up as give aways to their B&M stores. They're doing a FB promo and 251 lucky stores are going to win one set each. Would def be a nice little collectible to own :2cool:

custommvps.jpg
 

Utew

Senior Member
ECF Veteran
Sep 16, 2013
178
242
Eugene, OR
Thought everyone might enjoy looking at some special MVPs Innokin made up as give aways to their B&M stores. They're doing a FB promo and 251 lucky stores are going to win one set each. Would def be a nice little collectible to own :2cool:

Hmm, thanks for that.... so basically just wraps though. Nice case. :)

I do hope they make another version of the MVP, fix the current flaws. (firing pin height, button height on bottom creating wobble)
Perhaps two color combinations, or brass top and bottom caps?

The VTR is an interesting effort, but it needs to be made of aluminum to make it lighter, change position of the firing button and make the settings thumb-ring more accurate.
Those three things and it might make a worth successor to the MVP 2 (IMO).
Personally I'd like to keep the built-in battery, but only if the price was kept fairly low, otherwise removable batteries are more logical.

Just my :2c:
 

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
Not really, I cut the tip down on the rubber thing in the tank. It is much better(not going to pass out to vape), but still isn't my favorite at all. I used it with my cinnamon danish (that I love in my halo) and it was just ok.

My order was shipped from Vaper Alley for my kangert2's and vivi nova, so I am hoping for a better experience with them.
I have been enjoying my KMPT2 with menthols and cooler vapes though. I think thats all I would put in a bottom coil as I really like my desserts & bakerys in a warm vape.
I can get the KMPT2 to warm up but then the juice starts to taste burnt.



** hmmmmm, cinnamon danish in a plastic tank -- could that be your problem...?

- - -
yeah, I bet you are gonna like the T2
- - -
ever look/tried these-- they are small like a NANO, but replaceable dual top coil
they get pretty warm, simple -- it's the only top coil I really like...;)

- Innokin iClear10S Dual Coil Clearomizer

- Innokin iClear10 Dual Coil Clearomizer replacement wick & coil



Vape≈Healthy :)
 

LovinTheVapor

Senior Member
ECF Veteran
Verified Member
Jan 20, 2010
219
253
Alpharetta, Ga
Hmm, thanks for that.... so basically just wraps though. Nice case. :)

No, actually they're not wraps...printed. The contest is for 250 of the sets pictured, and a special 251st winner who gets a 6th MVP printed with what ever design they choose. Here's a blurb from the Official Contest Rules

4. The Winner of the customized MVP 2.0 should provide a preferred custom pattern and signature which can be printed on the MVP2.0, as well as a shipping address, and email this information to
 

lindsay1126

Senior Member
ECF Veteran
Verified Member
Oct 11, 2013
144
154
Near Seattle, WA
Hey everyone, I couldn't stand it I bought a tank from my local B&M. Its a bottom coil but, I got to try it and its really warm(1.8 ohms) and its not a wic(my first non wic tank) He said it was new its called aspire I think. I also picked up an atty. Now they only had one kind and I have never used one, but I am getting some Alhusion juices today and want to be able to do a taste test. so I looked in side and there is a small straw looking thing in the middle and then filler around that(sorry if my terms are not very accurate)where do I drip the liquid? I know you only put 3 drops in, but how many puffs does that make? Do I puff till I can't taste flavor anymore? Thanks for any insight.

Ok guys, I tried his(aspire tank) at the store and it was nice warm vape I just filled mine up (not full) and primed it and can't even vape it bc it keeps spitting in my mouth. Its nasty. I am sure it is something I did wrong but all he told me to do was prime it before attaching and it would be good to go.
 
Last edited:

lindsay1126

Senior Member
ECF Veteran
Verified Member
Oct 11, 2013
144
154
Near Seattle, WA
** hmmmmm, cinnamon danish in a plastic tank -- could that be your problem...?
I have never had any issues in my halo triton and I have vaped a LOT. I assumed that was for like hot cinnamon. That was not the first juice I tried in it though, it was moo juice(strawberry cream).
 

JHf

Senior Member
ECF Veteran
Verified Member
Jun 11, 2010
104
65
Vancouver, BC
I don't know if this helps, but whenever I screw in the iClear 30, it has contact with the MVP firing pin kind of high where there is a space between the tank and beauty ring (1/4 turn just to be sure). What I have done was unscrew the beauty ring to the height of the tank so I have a really tight connection without pushing the firing pin any lower (just in case of any contact problems with future tank/attys).
:toast:
 

vdaedalus

Super Member
ECF Veteran
Verified Member
Oct 3, 2013
304
258
Ottawa, Canada
What I have done was unscrew the beauty ring to the height of the tank so I have a really tight connection

I do this as well with my Protanks, but not for the sake of the firing pin. Makes the draw smoother, also makes me worry a little bit less about snapping the 510 connector eventually from 'micro-wiggles' (or, okay, just sitting on it). The beauty ring only loosens a quarter or half turn before it snugs up to the base of the tank, so it doesn't look or feel any different.
 

madqatter

Ultra Member
ECF Veteran
Sep 14, 2013
1,374
1,939
Virginia
I also picked up an atty. Now they only had one kind and I have never used one, but I am getting some Alhusion juices today and want to be able to do a taste test. so I looked in side and there is a small straw looking thing in the middle and then filler around that(sorry if my terms are not very accurate)where do I drip the liquid? I know you only put 3 drops in, but how many puffs does that make? Do I puff till I can't taste flavor anymore? Thanks for any insight.
When you say "filler," it sounds like you have a cartomizer rather than a dripping atomizer.

If you do get a dripping atomizer, here's a guide to using it.
 

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
I have never had any issues in my halo triton and I have vaped a LOT.
I assumed that was for like hot cinnamon. That was not the first juice I tried in it though, it was moo juice(strawberry cream).

Oh, OK - if you have been using your cinnamon in your
Halo tank (just a T2 from what I read) then I guess it's not an issue :oops: just a thought

-- carry on... :)
 

lindsay1126

Senior Member
ECF Veteran
Verified Member
Oct 11, 2013
144
154
Near Seattle, WA
madqatter:11204761 said:
I also picked up an atty. Now they only had one kind and I have never used one, but I am getting some Alhusion juices today and want to be able to do a taste test. so I looked in side and there is a small straw looking thing in the middle and then filler around that(sorry if my terms are not very accurate)where do I drip the liquid? I know you only put 3 drops in, but how many puffs does that make? Do I puff till I can't taste flavor anymore? Thanks for any insight.
When you say "filler," it sounds like you have a cartomizer rather than a dripping atomizer.

If you do get a dripping atomizer, here's a guide to using it.
It was a cartimizer with drip tip. I traded it for this atomizer anyone know what kind ot is?
 

Attachments

  • 20131106_150325.jpg
    20131106_150325.jpg
    20.7 KB · Views: 35

lindsay1126

Senior Member
ECF Veteran
Verified Member
Oct 11, 2013
144
154
Near Seattle, WA

Attachments

  • 20131106_152209.jpg
    20131106_152209.jpg
    20.7 KB · Views: 48
Status
Not open for further replies.

Users who are viewing this thread