iTaste MVP v2 Owners Group

Status
Not open for further replies.

lindsay1126

Senior Member
ECF Veteran
Verified Member
Oct 11, 2013
144
154
Near Seattle, WA
pelton54:11205239 said:
It was a cartimizer with drip tip. I traded it for this atomizer anyone know what kind ot is?

Can you take some pics of it apart? Looks like a rebuildable....


Sent from my iPhone using Tapatalk
Sorry I couldn't figure out to send together.
 

Attachments

  • 20131106_152119.jpg
    20131106_152119.jpg
    21.3 KB · Views: 36

pelton54

Moved On
Oct 16, 2013
220
166
Yep here's some.

Yea that's a rebuildable....might be difficult for a beginner but If you want to learn there are a TON of YouTube videos online to teach you
This is not the same one you have but it will give you an idea of what your dealing with
http://m.youtube.com/watch?v=-OeNaVk3Sck

The best dripping atty that I have that I absolutely love is the hh357 it's a little pricey but mine has already lasted me 3 months no problems super easy to clean as well and easy to use. I have the 1.5ohm long barrel
http://www.avidvaper.com/hh-357-long-barrel-hybrid-510-atomizer/


Sent from my iPhone using Tapatalk
 

lindsay1126

Senior Member
ECF Veteran
Verified Member
Oct 11, 2013
144
154
Near Seattle, WA
Yea that's a rebuildable....might be difficult for a beginner but If you want to learn there are a TON of YouTube videos online to teach you
This is not the same one you have but it will give you an idea of what your dealing with
So i will be able to use it the same untill the wic goes out, correct? I am hoping it will give me enough time to be able to learn how to rebuild the coil. I ordered a 510 atomizer and it will be here in a day or two but I really wanted to try my new ahlusion juices, now if they would just get here. So does the guide I read up on apply the same way to this kind. BTW I know this should really be in a different thread but it is going on my MVP2.:)
 

pelton54

Moved On
Oct 16, 2013
220
166
So i will be able to use it the same untill the wic goes out, correct? I am hoping it will give me enough time to be able to learn how to rebuild the coil. I ordered a 510 atomizer and it will be here in a day or two but I really wanted to try my new ahlusion juices, now if they would just get here. So does the guide I read up on apply the same way to this kind. BTW I know this should really be in a different thread but it is going on my MVP2.:)

Go watch a few rebuildable dripper videos on YouTube they will teach you a lot it is very simple to use


Sent from my iPhone using Tapatalk
 

Capt.shay

Vaping Master
ECF Veteran
Verified Member
May 10, 2013
3,662
8,189
W. Ma. U.S.A.
Quote Originally Posted by lindsay1126 View Post
So i will be able to use it the same untill the wic goes out, correct? I am hoping it will give me enough time to be able to learn how to rebuild the coil. I ordered a 510 atomizer and it will be here in a day or two but I really wanted to try my new ahlusion juices, now if they would just get here. So does the guide I read up on apply the same way to this kind. BTW I know this should really be in a different thread but it is going on my MVP2.


That dripping atty is good to go as it is. When you change flavors you just rinse it out and do a quick dry fire. To rebuild it you are going to have to get some wick and wire. Lots of U-tubes on how to do it.

You are so jumping in feet first to this vaping thing. VV/VW mod, DIY juice and now RDA's (rebuild-able dripping attys ). You go girl!
 
Last edited:

Nailz

Vaping Master
ECF Veteran
Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    Vape 101 now has all the colors and I can't get away from their site. I just know a blue one will be heading towards my home soon.

    I just got a blue one today, already had a black one, which is my work battery, wanted a blue for at home, got mine from eBay, but was only a few extra bux than 101, looks really slick in blue ;)
     

    lindsay1126

    Senior Member
    ECF Veteran
    Verified Member
    Oct 11, 2013
    144
    154
    Near Seattle, WA
    That dripping atty is good to go as it is. When you change flavors you just rinse it out and do a quick dry fire. To rebuild it you are going to have to get some wick and wire. Lots of U-tubes on how to do it.

    You are so jumping in feet first to this vaping thing. VV/VW mod, DIY juice and now RDA's (rebuild-able dripping attys ). You go girl!
    Don't know how it will all turn out quite yet. The atomizer was an impulse buy, I had ordered a non rebuildable bc I didn't want to delve into that yet, but really wanted to try a few different flavors today. My husband always teases me, bc he says I don't know how to do things in moderation, its always jump in figure it out later. The DIY juices comes from not finding juices I love without mixing them myselves, and I need to show hubby that vaping is cheaper and with all I am buying so far it really i about equal.:facepalm:
     

    pelton54

    Moved On
    Oct 16, 2013
    220
    166
    Don't know how it will all turn out quite yet. The atomizer was an impulse buy, I had ordered a non rebuildable bc I didn't want to delve into that yet, but really wanted to try a few different flavors today. My husband always teases me, bc he says I don't know how to do things in moderation, its always jump in figure it out later. The DIY juices comes from not finding juices I love without mixing them myselves, and I need to show hubby that vaping is cheaper and with all I am buying so far it really i about equal.:facepalm:

    Started vaping they said.....it'll be cheaper they said....

    Same problem here lol


    Sent from my iPhone using Tapatalk
     

    mgavilondo

    Super Member
    ECF Veteran
    Verified Member
    Oct 19, 2013
    308
    1,712
    ok so I changed wattage and it doesn't taste bad but it still VERY hard to pull. I get a lot more vapor than I expect to but its a ....* to pull. Does anyone have a recommendation for a warmer vape tank that works well with the MVP2? I really don't like cool hit of the MPT2. I want a warm vape like my triton on my MVP. I think thats why I am not as impressed is I am missing my warm vape.

    I use the aspire-et glassomizer and can't say enough about how good it vapes.. Warm dual heads tons of vapor on the MVP and very consistent.. Heads last a long time.. Like 2wks plus with just a soaking.. Negatives are you can't dry burn or even clean the wicks.. I can even see them lol... And heads are a bit more than kanger PT heads.. But to me it's worth it .. Flavors pop with the MVP /aspire combo IMHO


    Sent from my iPhone using Tapatalk - now Free
    http://www.indiegogo.com/projects/v...st-cell-phone-case-vaporizer#&ui-state=dialog
     

    COHgirl

    Super Member
    ECF Veteran
    Verified Member
    Dec 25, 2012
    701
    1,661
    Kansas
    Started vaping they said.....it'll be cheaper they said....

    Same problem here lol


    Sent from my iPhone using Tapatalk

    I did some rough figuring the other day...I've spent almost $800 since august. I have stored away nearly 50 atomizers for my stash of 4 extra Aros. I've got about 40 juices spending there time locked in a dark drawer. Yeah, feet first!!

    This can be an expensive hobby, but I feel better not smoking and I enjoy it. No regrets!
     

    COHgirl

    Super Member
    ECF Veteran
    Verified Member
    Dec 25, 2012
    701
    1,661
    Kansas
    I use the aspire-et glassomizer and can't say enough about how good it vapes.. Warm dual heads tons of vapor on the MVP and very consistent.. Heads last a long time.. Like 2wks plus with just a soaking.. Negatives are you can't dry burn or even clean the wicks.. I can even see them lol... And heads are a bit more than kanger PT heads.. But to me it's worth it .. Flavors pop with the MVP /aspire combo IMHO


    Sent from my iPhone using Tapatalk - now Free
    VapeCase - The World's First Cell Phone Case Vaporizer | Indiegogo


    I never dry burn and I love a warm vape. I need to look into this one.
     

    gerrymi

    Vaping Master
    ECF Veteran
    Jul 12, 2013
    3,917
    14,560
    The 'Burgh, PA.

    lindsay1126

    Senior Member
    ECF Veteran
    Verified Member
    Oct 11, 2013
    144
    154
    Near Seattle, WA
    Well I tried the atomizer and it seems to last forever. I only put a few drops, in it tasted a little burny(I know its not a word) so I added a few more and have puffed...puffed...puffed and its still going. I love the flavor burst. I put same flavor in my tank and I can tell a difference. And I can finally get the big deal with the VV/VW! So impressed!

    Cheapest Aspire heads I've run across...MFS...$10.95 (5 PK.)
    The shop owner said he was having problems finding them, good to know I can.
     

    Nailz

    Vaping Master
    ECF Veteran
    Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    Status
    Not open for further replies.

    Users who are viewing this thread