iTaste MVP v2 Owners Group

Status
Not open for further replies.

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
Received my MVP v2 today :banana: So far...LOVE it! Just want to give a BIG thumbs up to the Ebay seller mentioned here vapingtown. I ordered Tuesday the 7th and received it ( today ) Thursday the 9th. Two days from CA to NC is Awesome!
Congratulations on ownership of a fine new vaping device !


Will be part of this group soon. I ordered mine from vapingtown off ebay.
your gonna be SO happy , good job

iTaste EP
It also has a eGo charger with it so it's not a USB or pass through.

after some poking around, I've come to the realization that I have seen those minis
and just never knew they were minis - just glossed over and thought they were the vv V3
nothing more than a square EGO battery, no adj, no passthrough...

700 mah / 3.5v set regulated output / all have 510 threads (some have ego threads to)
my kanger evod 650mah is 3.250", these are 3.500"

- Innokin iTaste EP Vape Pen Starter Kit
- Innokin iTaste EP Starter Kit with iClear10 Clearomizers
- Aqwa Square Mini Kit

I guess they are kinda cute :blush:





--------------------------------------
Happy 70th Birthday "Jimmy Page"
--------------------------------------​
 

rustafar

Super Member
ECF Veteran
Verified Member
Jun 18, 2013
375
165
Weeki Wachee, FL.
Here's a very cheap way to give you MVP a new look. I bought a roll of wood grain contact paper for $2.00, use a very small piece of it.
So it's probably $.05 worth of material. Not the best job in the world but it works. :) . Didn't use the template, just wrapped it and used a razor blade to trim around the screen and buttons.
 

Attachments

  • IMG_1927.jpg
    IMG_1927.jpg
    20 KB · Views: 36
  • IMG_1926.jpg
    IMG_1926.jpg
    19.6 KB · Views: 36
  • IMG_1924.jpg
    IMG_1924.jpg
    19.4 KB · Views: 36
  • IMG_1925.jpg
    IMG_1925.jpg
    19.6 KB · Views: 34

rustafar

Super Member
ECF Veteran
Verified Member
Jun 18, 2013
375
165
Weeki Wachee, FL.

Red Dog

Super Member
ECF Veteran
Oct 14, 2009
346
94
Massachusetts
www.facebook.com
Funny but orders coming via USPS from West coast to East coast only takes 2 days. I've ordered so much from CA and received items in 2 days. East coast to East coast takes a day or so longer.

I never get shipping with USPS that fast. For me "2 day shipping" takes 3 to 4 days, and I'm just 15 miles south of Boston, not like I'm out in the middle of no where. FedEx and UPS on the other hand have no trouble getting me packages in 2 days from the west coast.
 

Red Dog

Super Member
ECF Veteran
Oct 14, 2009
346
94
Massachusetts
www.facebook.com
for some reason my mvp2 just stopped recognizing the Iclear30. Tried messing with the tank and the device..."non". All my other tanks work fine. The iclear30 isn't that great anyway, but still sucks not being able to use it. Anyone else run into this?

Also, can anyone recommend a rebuildable atty that fits on the mvp2? Im afraid to buy one now and have it read Non

Sounds like the coil is dead. Do you have a multimeter or another device to check it?
 

tragictaste

Senior Member
ECF Veteran
Nov 1, 2013
202
261
Houston, Tx,
Hey guys, I just wrapped rather accidentally a 1.0ohm coil.

Is that gonna cause any problems on the MVP? It's firing and I've read here 0.8 fires too. Just wanting to make sure it isn't gonna cause anything to happen or put strain on this battery.

Sent from my GT-I9505 using Tapatalk

I forget what the amp limit of the MVP is, but at low ohms you can potentially push the battery all the way. Thats why it should have safe guards against firing a coil with sub/or close to it, ohms. So at 1 ohm (if the amp limit is around 3, which I think it may be) that will only give you 3v/9w of power.
 

Nailz

Vaping Master
ECF Veteran
Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    Hey guys, I just wrapped rather accidentally a 1.0ohm coil.

    Is that gonna cause any problems on the MVP? It's firing and I've read here 0.8 fires too. Just wanting to make sure it isn't gonna cause anything to happen or put strain on this battery.

    Sent from my GT-I9505 using Tapatalk

    I'm using coils 1.1ohms and 1.2ohms and working good at 10watts, does drain the battery a lot faster of course, but it's worth it ;)
     

    Capt.shay

    Vaping Master
    ECF Veteran
    Verified Member
    May 10, 2013
    3,662
    8,189
    W. Ma. U.S.A.
    Amp rating for the MVP is 3.5 amps. Won't allow you to draw any more than that.

    I'm pretty sure the amp limit does not function on the MVP. I pushed the heck out of my V1 with a .8 coil and it would fire all the way cranked up.

    I wrote Innokin about it and asked for battery specifications and limits. They sent me back a really bad Chingles reply about my juice tasting burnt if I go that low. I had asked them about the battery specifications and nothing about how my juice taste:laugh:
     

    WelshVapour

    Super Member
    ECF Veteran
    Verified Member
    Oct 17, 2013
    599
    20,735
    wales, UK
    I'm using coils 1.1ohms and 1.2ohms and working good at 10watts, does drain the battery a lot faster of course, but it's worth it ;)

    Right now I'm running at 7.0w and juice is fine etc so I'll just work on the assumption it's ok and wrap another coil in a while.

    Sent from my GT-I9505 using Tapatalk
     
    Status
    Not open for further replies.

    Users who are viewing this thread