iTaste MVP v2 Owners Group

[gerrymi]

Picked up the IPV2 50 watt and must say that it is a fabulous device for those looking for dripping power.

Happen to have a link handy (to check it out/perhaps purchase)?

I can personally attest to the Performance and flavor of these BVC for the nautilus systems. 1.) They are awesome. 2.) They last about 2 weeks under heavy vaping before exhibiting degradation. 3.)After 2 weeks they can be Boiled clean, Dried out, and reused again. Can't really say enough good things about them. Don't want to be labeled a Fan-Boi'....So I'll stop.--Dave

I bought a 5-pack of the BVC's ($11.95 at MFS) to try in my neglected (original) Nautilus in my back-up-drawer. After almost 2 weeks on the (first) head (at 11 Watts) I really only have two "issues".

First...the nicotine "hit" you get with them. After vaping 12mg. for over a year the BVC's gave me a real kick in the A##! (Easily rectified by a trip to the local B&M to get some 6mg. joose.)

Second...the voluminous amount of vapor (I use 70PG:30VG). I have to wait after an exhale to see my PC screen and sometimes it's difficult to see the TV from the couch. (NOT complaining.) (When going out in public I'm able to dial it down by using only 7-8 Watts.)

[GrimmGreen and IndoorSmokers said the BVC was "great" at 14-15 Watts but I have yet to work up the courage to try it on my Vamo]

 

[Xtro]

If you dont have one, get a T6 torx driver: SE 7542ST 6-Piece Deluxe Torx Driver Kit Storage T5-T10 - Screwdrivers - Amazon.com

Using a Precision (tiny) flat-tip driver, insert it between the case and button bezel and pry the bezel and button out. Should pretty much just snap out. The bezel, button, and silicon 'spring' all come out together.

Using the T6, unscrew the 4 top screws. They are fairly tight, enough to 'pop' when you loosen them.

Gently pull the top casing and attached switch board out. They are attached by wires, so be careful.

Thanks for the advice Midniteoyl. I ordered a set of Torx drivers and got them today. Amazon sell a different set here in UK, but when they arrived they didn't have the correct size I need. No problem; I'll send them back tomorrow and already ordered another set.
Will let you know how the repairs turn out.

 

[Midniteoyl]

Thanks for the advice Midniteoyl. I ordered a set of Torx drivers and got them today. Amazon sell a different set here in UK, but when they arrived they didn't have the correct size I need. No problem; I'll send them back tomorrow and already ordered another set.
Will let you know how the repairs turn out.

Let us know

And yes, make sure the description says 't-6' is included

 

[Midniteoyl]

http://www.amazon.co.uk/PRECISION-P...sim_diy_2?ie=UTF8&refRID=15BE8ZTCDZFWB2RAAXED

http://www.amazon.co.uk/LINDY-Computer-Technician-Precision-Torx/dp/B0000934GO/ref=pd_cp_diy_2

[url]http://www.amazon.co.uk/Yato-professional-precision-screwdriver-YT25862/dp/B00B34QXJY/ref=sr_1_8?ie=UTF8&qid=1407882080&sr=8-8&keywords=precision+t-6+torx
[/URL]

 

[FCastle]

Sounds like you had a bad head for the Iclear , i had one like that a few days ago , terrible . I buy authentic five packs at FT for around $6.00 , one bad head out of the pack so far , taste is unreal for an off the shelf clearo.

Possibly, though I googled it and no flavor/burnt taste seems to be a fairly common complaint with the i30. I got a couple replacement heads with it, haven't tried them yet because I'm really liking the Evods, especially for a $6 clearo. The black Evods look really nice on my black MVP, and it's a more compact package that fits in my pocket better. More vapor and much better flavor than my i30, while using less juice and battery. The bottom coil design is easier to fill and change heads. A friend uses the 30b and really likes it, might give one of them a try at some point.

 

[Xtro]

http://www.amazon.co.uk/PRECISION-P...sim_diy_2?ie=UTF8&refRID=15BE8ZTCDZFWB2RAAXED

http://www.amazon.co.uk/LINDY-Computer-Technician-Precision-Torx/dp/B0000934GO/ref=pd_cp_diy_2

[url]http://www.amazon.co.uk/Yato-professional-precision-screwdriver-YT25862/dp/B00B34QXJY/ref=sr_1_8?ie=UTF8&qid=1407882080&sr=8-8&keywords=precision+t-6+torx
[/URL]

Looked at those but went with this instead. So long as they do the job, I'll be happy.
45 in 1 Precision Electron Torx Screwdriver Set,Hand Screw driver Tools Set Kit For Mobilephone DVD TV Computer: Amazon.co.uk: DIY & Tools

 

[Withdrewandi]

Well I bit the bullet and ordered myself the nautilus mini £20 comes with 1 replacement head/coil so not too bad should last me a month ( I hope )... Probably shoud have bought more but just didn't have the cash right this second.... Should be here by Thursday then I need to find myself a more portable device for when I am out and about

 

[DavidAmonettNashville]

Well I bit the bullet and ordered myself the nautilus mini £20 comes with 1 replacement head/coil so not too bad should last me a month ( I hope )... Probably shoud have bought more but just didn't have the cash right this second.... Should be here by Thursday then I need to find myself a more portable device for when I am out and about

You made a good choice. Be sure to check the scratch off code on the Aspire site. There are counterfeit Nautilus systems out there.. Providing yours is legit I think you will be very impressed with the new BVC system. All I can really say is WOW.. Best vapor and taste I've ever had from a stock clearo. I too had to drop my nic level down. 24mg was way to intense in the Nautilus with BVC. I dropped to about 16 mg from 24. My wife dropped from 18 mg to 8 mg in her mini nautilus., Also, as someone else mentioned, I had to take into account the newfound fact that I could "Blow clouds" without really even trying....Gotta stay Classy right? All kidding aside, Congrats on the Mini and keep us posted--Dave

 

[Midniteoyl]

Looked at those but went with this instead. So long as they do the job, I'll be happy.
45 in 1 Precision Electron Torx Screwdriver Set,Hand Screw driver Tools Set Kit For Mobilephone DVD TV Computer: Amazon.co.uk: DIY & Tools

Nice find They will do IF the driver can still seat in the screws next to the 510/ego connector. Kinda tight there..

 

[njjayt82]

Okay, so I've been a happy mvp user since October, and now I'm beginning to notice the threading is getting wonky, I can only screw my nautilus on it, I've tried to screw my T-dux 4.0 ( with an adapter because my firing pin went months ago) and it will not screw in with my pro tank-2, iclear 30s (with or without the adapter) but will work with my iclear 30 (the one that comes with the mvp, without an adapter). I have tried 2 different adapters and the majority of my tanks either spin endlessly or catch and not tighten.. Any pearls of wisdom for this issues?

I attempted to search through this post/forum and didn't come up with any kind of "fix" for this issue, I am contemplating buying another mvp, but I'd rather attempt to fix the issues ( if i can), or even going with a mech ( but am not keen on having to worry about batteries being accustomed to the mvp).

 

[pufZeppelin]

Possibly, though I googled it and no flavor/burnt taste seems to be a fairly common complaint with the i30. I got a couple replacement heads with it, haven't tried them yet because

I'm really liking the Evods, especially for a $6 clearo. The black Evods look really nice on my black MVP, and it's a more compact package that fits in my pocket better.

More vapor and much better flavor than my i30, while using less juice and battery. The bottom coil design is easier to fill and change heads.
A friend uses the 30b and really likes it, might give one of them a try at some point.

yepper, I like the look of the MVP/EVOD (blk&blk)

they look like they came together, made for each other...

EVODs big brother looks the part also...

Kanger MT3S Clearo

- http://cdn.shopify.com/s/files/1/02...-bed2-c13a4fca3f90_1024x1024.jpg?v=1398041730

 

[pufZeppelin]

Okay, so I've been a happy mvp user since October, and now I'm beginning to notice the threading is getting wonky, I can only screw my nautilus on it, I've tried to screw my T-dux 4.0 ( with an adapter because my firing pin went months ago) and it will not screw in with my pro tank-2, iclear 30s (with or without the adapter) but will work with my iclear 30 (the one that comes with the mvp, without an adapter). I have tried 2 different adapters and the majority of my tanks either spin endlessly or catch and not tighten.. Any pearls of wisdom for this issues?

I attempted to search through this post/forum and didn't come up with any kind of "fix" for this issue, I am contemplating buying another mvp, but I'd rather attempt to fix the issues ( if i can), or even going with a mech ( but am not keen on having to worry about batteries being accustomed to the mvp).

one of these special

ego to ego adapters

might be what cures what ails your MVP device...

- https://www.ecigaretteimpressions.com/accessories/adapters.php

 

[njjayt82]

one of these special

ego to ego adapters

might be what cures what ails your MVP device...

- https://www.ecigaretteimpressions.com/accessories/adapters.php

Thanks i'll give that a whirl! I really don't feature having to preform surgery so this is the best option!


Okay after going to the page and clicking add to cart, I get a page saying they don't do online sales anymore as of 7-1-14. BOOOOOO!! So ill be looking for an appropriate replacement on another site.

 

[gandymarsh]

Found this eGo to [eGo] Adapter

 

[sando7]

...........@gandymarsh, remember a post awhile back that you stocked up on Nicotine, just wanted to let ya know it's best to store it in a dark cool place.....forgive me if you already knew this.....i got a nice little stash going myself.

 

[gandymarsh]

...........@gandymarsh, remember a post awhile back that you stocked up on Nicotine, just wanted to let ya know it's best to store it in a dark cool place.....forgive me if you already knew this.....i got a nice little stash going myself.

Thanks, right now it's in the bottom drawer in my fridge. Would it be better in a brown paper bag in the basement?

 

[pufZeppelin]

Thanks i'll give that a whirl! I really don't feature having to preform surgery so this is the best option!


Okay after going to the page and clicking add to cart, I get a page saying they don't do online sales anymore as of 7-1-14. BOOOOOO!! So ill be looking for an appropriate replacement on another site.

sorry, the one linked is only other one in stock I see now...

- - -

but this is scary -- is this what we are gonna start to see
prohibition déjà vu, boy, sure hope not...

As of July 1, 2014
Due to Iowa Law, E Cigarette Impressions will no longer be able to support online sales


The Updated News 08/05/2014


Much to my dismay, the state of Iowa will no longer allow online electronic cigarette sales. Iowa appears to prefer people to smoke rather than support an alternative with obvious personal and societal benefits. Not only is this the opposite of everything I understood from forums and such before the effective date of the new law, but according to my attorney, the tone of his voice seemed to reveal Iowa law is falling right in line with the control over electronic cigarettes such as the FDA is poised to implement. The age restriction was only the beginning for Iowa. We were foolish to believe that electronic cigarettes would be given a category of their own; HR 2109 instead simply provided a strict definition for electronic cigarettes so to lump them altogether under the same Cigarettes and Tobacco restrictions. The letter from my attorney will be posted upon arrival. Don't allow the FDA to destroy the freedom we hold so dear.

​

 

[sando7]

Thanks, right now it's in the bottom drawer in my fridge. Would it be better in a brown paper bag in the basement?

ought to be good either way.....any kind of light will make it turn dark

 

[sando7]

sorry, the one linked is only other one in stock I see now...

- - -

but this is scary -- is this what we are gonna start to see
prohibition déjà vu, boy, sure hope not...

​

​

this is the exact reason people should have voiced their opinions/comments to the FDA when they had a chance, but hey it won't happen to you.

it's not only about e-cigs and Vaping , one freedom after the next will be taken away from us as long as no one stands up, what's next, think about it.

on another note i only saw about 3 to 4 names from this group that even bothered to voice their comments and i commend you all, thank you for participating and standing up for what you believe in.

 

[pufZeppelin]

was at the ECF front page, seen & clk on this link,
NO mechmod & RBA questions OR ANSWERS here please
PLEASE do not post questions in this forum about mechmods and RBAs.
DO NOT give answers that mention mechmods and RBAs - THANK YOU.
when I went back to find/re read it, I couldn’t find it
I found it; so here is some of what I originally copy/paste posted
where it is posted in the newbie section…
- http://www.e-cigarette-forum.com/fo...s-how-answer-questions-here.html#post13849328