i still got a 28 ga coil on my kayfun that i bet is 4 months old, have dry burned that puppy many times and it still ain't popped, still works fine and i'll keep using it till it pops.
iTaste MVP v2 Owners Group
- Thread starter KnurledNut
- Start date
- th_trl_thread_readers 0
- Status
i still got a 28 ga coil on my kayfun that i bet is 4 months old, have dry burned that puppy many times and it still ain't popped, still works fine and i'll keep using it till it pops.
In all fairness there is no DNA 100watt....Evolv makes the Dna board. I think your thinking of the the YiHi
*cough* reverse battery protection *cough* 0.2ohms *cough* Short circuit protection *cough 8.5v *cough cough*
Yep, yep and ??.... I have no clue why Evolv wouldn't incorporate reverse battery protection...That was Pbusardos only real gripe(Thumbs down). FYI. Innokins DNA chip has it(so it can be done). The .2 part is true enough too. Part of the reason that the Sub-ohm crowd loves the YiHi board.I think it's a good board too.I think the problems we've seen, Shorting, meltdowns, Sudden death..Are enclosure related and don't really pertain to the chip itself. Short circuit protection is something the Dna board Does have unless you know something I don't?
Welcome...
Here's a nice leather case for $10...I've ordered from this seller many times without issue.
Itaste MVP Brown Leather Holder | eBay
The same seller has 12 wraps for $6...
Innokin Itaste MVP Texture Wraps 12 Total in A Single Package | eBay
If you want free wraps, someone here (Capt.?) has info on his profile on how to get free wrap material and a downloadable pattern to make your own. I'm sure they'll chime in and provide what I can't remember, I suffer from CRS (can't remember ****)
Here's a nice leather case for $10...I've ordered from this seller many times without issue.
Itaste MVP Brown Leather Holder | eBay
The same seller has 12 wraps for $6...
Innokin Itaste MVP Texture Wraps 12 Total in A Single Package | eBay
If you want free wraps, someone here (Capt.?) has info on his profile on how to get free wrap material and a downloadable pattern to make your own. I'm sure they'll chime in and provide what I can't remember, I suffer from CRS (can't remember ****)
Mine too bro, 28 ga @ 1.3 ohms on my KFL since April. It may last forever
Sits on my MVP at 3.7 volts and never let's me down
Holy cow, a Reo mini , thats awesome.
that's really cool, i always liked that kind of work....i was a sheet metal fabricator for 21 yrs and i loved it, was always building something different; Tobacco equipment mostly for Phillip Morris i specialized in stainless cylinders 10 ft in diameter and 40 foot long.......cut and rolled my own metal fitted and tacked it then welded it off and then sent it to the peeps who assembled the motors.....made stuff that's been sent all over the world mostly in Asia....our company made specialized Machinery you couldn't get any-where else.
ain't had a heart-attack yet, but i got diabetes type 2, high blood pressure and my liver has some funky lipid levels from abusing myself in my younger/wilder days and my eyes are getting worse every-day....i'll prob live a few more yrs tho just out of spite and i gotta Vape....i'm ramblin, now to the coffee and the
Yeah , i'm with ya Sando , got diagnosed with type II myself a few months ago , depression set in big time. My eyesight went right down the drain as well , i got to be honest , i'm not too fond of aging .
Mine too bro, 28 ga @ 1.3 ohms on my KFL since April. It may last forever
Sits on my MVP at 3.7 volts and never let's me down
Wow, i replace my coils regularly not because i have to , just because i'm bored and enjoy making new ones lol.
Last edited:
- Dec 18, 2013
- 2,946
- 56,640
- 79
one thing about getting old tho, you do the hard things out of Discipline and or spite and the job gets done without complaining....the only thing that slows down is the body, mind is sharp as a razor..........but hell yea i'd love to be 35 again and out tromping in the woods and hills chasing those Bucks and huntin shroons & sippin on some shine.....ah the good ole days 
man i got to say it again, my Carto Tank on my MVP Tastes awesome, almost as good as dripping ;one notch down from it
man i got to say it again, my Carto Tank on my MVP Tastes awesome, almost as good as dripping ;one notch down from it
Last edited:
- Dec 18, 2013
- 2,946
- 56,640
- 79
I dunno, Sando. I'd love to be 55 again. And the "first" thing that slows is the body. Not the only thing.
welcome to the High Society MVP club (yea right)
glad to hear about your new addition to vaping
old rule of thumb, add 2.0 to your Ω and youre real close±
{2.0+1.8Ω=3.8v/2.0+2.5Ω=4.5v} 8.0w is about same, but automatic...
sometimes I just dont want it in my pocket
dont wanna leave it sit, so I let it hang around my neck
drop it down inside my shirt when Im not using it,
works out good on those occasions
find a nice strap & also option of hooking on belt/waistband
- Sandwich Carrying Case For Samsung Galaxy S3 (S III), Galaxy S4 - Samsung Galaxy S4 Cases
these things are REALLY nice quality (holster leather quality)
- Innokin iTaste Leather Holster
then there is this one (jus`cause Im into leather)
- Innokin iTaste MVP leather pouch
so that TDux 30 has a ceramic cup coil ?
do you think it is a better performer than say Aspire bdc or a kanger bcc ?
read about them, never tried any-just wondered
Vape≈Hard
My experience with CE3XL (first bottom coils in the marker) is that the ceramic cup enhances vapor production. Still have some left and compare them head to head to what I've got and are better than most what we're vaping nowadays
I know! I'm super excited! Its basically the guts of a reo as its no batt/bottle/rda, but I couldn't be happier. He had,a zen zna I could have chose but I really want a reo!
Via a possessed phone thats autocorrect is just silly
old rule of thumb, add 2.0 to your Ω and youre real close±
{2.0+1.8Ω=3.8v/2.0+2.5Ω=4.5v} 8.0w is about same, but automatic...
so that TDux 30 has a ceramic cup coil ?
do you think it is a better performer than say Aspire bdc or a kanger bcc ?
read about them, never tried any-just wondered
Vape≈Hard
Thanks for the links! I'll give them a peek.
I believe the TD 30 IS a ceramic cup. Dual coil. I tend to run a little hot, and was noticing I was going through SC's a lot faster than I'd like.
Regarding your SS Formula as mentioned above; add 2 to current Ohm for a voltage setting.... What about wattage? I'm not sure if I can even tell any difference in any different setting I have for that.
At the moment I'm running 4.5v at 10.5w. And in 24 hours, I have discharged this powerhouse battery .2v. lol
Thanks! I'll take a peek. I saw a decent one on the Amazon JWraps Time Piece Designed E-Cigarette Protective Vinyl Skin Wrap for ITaste MVP MOD Vaporizer
We'll see....
Last edited:
so that TDux 30 has a ceramic cup coil ?
do you think it is a better performer than say Aspire bdc or a kanger bcc ?
read about them, never tried any-just wondered
Vape≈Hard
I am actually not sure if it is ceramic or not. How's that for not really knowing what I'm using. lol.....
SMOK TDUX 3.0 A page for the tank, but no info really on the coils themselves....
So that's what a New Wave iClear 16B looks like on a New Wave MVP2!
Awhile back CompleteVape had a sale and that's what I ordered. But when it arrived it was a New Wave MVP2 with an Oak iClear 16B.
But it was a GREAT sale, I try not to upset myself over minor predicaments in life and I'm much more concerned with function than with looks...so I'm using them with much satisfaction.
I don't have a RBA (too lazy) but GrimmGreen and IndoorSmokers both said that the Nautilus (with BVC coils) had replaced their Kayfuns in daily use.
They both also noted that the BVC coils really "shine" at 14-15Watts (which I found to be true when switching them from my MVP2 to my Vamo V5).
So another "path" to consider would be to get a $31-$34 Vamo (goes up to 15Watts) to use with your BVC's.
Then...you could give the 30Watt-100Watt Mods time to come down from their current $56-$150 prices if you later still found the need for a RBA.
KSD Newest Vamo V5 apv VV VW Vaporizer Updated OLED New Look Free Shipping | eBay
So that's what a New Wave iClear 16B looks like on a New Wave MVP2!
Awhile back CompleteVape had a sale and that's what I ordered. But when it arrived it was a New Wave MVP2 with an Oak iClear 16B.
But it was a GREAT sale, I try not to upset myself over minor predicaments in life and I'm much more concerned with function than with looks...so I'm using them with much satisfaction.
I don't have a RBA (too lazy) but GrimmGreen and IndoorSmokers both said that the Nautilus (with BVC coils) had replaced their Kayfuns in daily use.
They both also noted that the BVC coils really "shine" at 14-15Watts (which I found to be true when switching them from my MVP2 to my Vamo V5).
So another "path" to consider would be to get a $31-$34 Vamo (goes up to 15Watts) to use with your BVC's.
Then...you could give the 30Watt-100Watt Mods time to come down from their current $56-$150 prices if you later still found the need for a RBA.
KSD Newest Vamo V5 apv VV VW Vaporizer Updated OLED New Look Free Shipping | eBay
The BVC heads do taste/perform better @ 12-15watts. No Doubt about it. And it's strange that you mention the Vamo option because I just bought a V5 yesterday to use with my Nautilus BVC's. Unfortunately I did not get it on sale....I probably paid too much. 54.00. Gun metal grey with the new menu That shows ohms, watts, and Batt. level.
Thanks for the links! I'll give them a peek.
I believe the TD 30 IS a ceramic cup. Dual coil. I tend to run a little hot, and was noticing I was going through SC's a lot faster than I'd like.
Regarding your SS Formula as mentioned above; add 2 to current Ohm for a voltage setting.... What about wattage? I'm not sure if I can even tell any difference in any different setting I have for that.
At the moment I'm running 4.5v at 10.5w. And in 24 hours, I have discharged this powerhouse battery .2v. lol
yeah I just wondered how the two coils compared, if ya ever (Susaz claims
)ya figure your Volts (what ya like) then convert to watts (if you want)
- https://www.watlow.com/reference/tools/ohmslaw.cfm
8.0w usally does the same (add 2.0)
- just for the record: either Volts OR Watts (cant be both)
- be careful not to overtighten toppers
- dont wait to charge (charge soon & often)
- and as always, dont drop it on your toe
The coil rests in a ceramic cup, and the juice flow has been increased
- T-Dux 3.0, 1.5 Ohm Dual Coil
- Introducing the New T-Dux 2.0 Bottom-Coil Clearomizer - YouTube
hey PufZ, instead of leaving them Morgans to somebody after i die i might as well use-um
man if i just still had access to my old fabrication shop i could make all kinds of goodies, we had a hell of a machine shop with every high end piece of machinery you could imagine
and all the tools & equipment to go w/it, makes me drool just to think about it
I hear ya
if we only had the foresight 30 yr ago to fab up
an electric nic juice burner...
jumper cables / car batt / a grease gun tube / some old lifters
yeah I just wondered how the two coils compared, if ya ever (Susaz claims
ya figure your Volts (what ya like) then convert to watts (if you want)
- https://www.watlow.com/reference/tools/ohmslaw.cfm
8.0w usally does the same (add 2.0)
That's what I figured..... It's all a circle of math. lol
So........Then how is it possible that I can adjust the volts AND watts? According to the display, I've got
4.5v at 2.1 Ω. According to Ohms Law, that ought to be 9.64w. But the setting is at 10.5.
So what is actually being adjusted?
*****DISCLAIMER: All I know about electricity I learned from Google and Looney Toons. So don't think you're dealing with a genius here.*****
- Status
Similar threads
