Older Folks and Vaping Back Porch - Part Five

[2legsshrt]

Good Morning, not doing so good today this is the worst my leg has felt since I did this. Definately going in on Monday.
Omaha Omaha I think the 8' quater back is going to win if Denver can't hurt a few guys.

 

[Debadoo]

Good Morning, not doing so good today this is the worst my leg has felt since I did this. Definately going in on Monday.

So sorry it's feeling worse.......but very glad you're getting it seen on Monday!!!

 

[MikeE3]

This is why i dont play blackjack.. texas holdem is my game... the funny thing is my and my sister both learned holdem independently, didnt even know the other played, but we have the exact same playing style... so needless to say we have played for hours with neither of us gaining a chip advantage lol

Welcome to the porches jb ... I see you found the front porch too.

Wismec dna200, .39 ohm dual coil claptons in a turbo v3 enjoing some muffin man right now. Getting ready to make myself a diy mix.

Never got beyond a simple twisted coil ... then went right back to single strands. You wrapping your own Claptons?

 

[MikeE3]

Good Morning, not doing so good today this is the worst my leg has felt since I did this. Definately going in on Monday.
Omaha Omaha I think the 8' quater back is going to win if Denver can't hurt a few guys.

Sorry to hear it legs ... hope the Doc can get you healing up soon.

 

[Iffy]

Good Morning, not doing so good today this is the worst my leg has felt since I did this. Definately going in on Monday.

Sorry 'bout your hurting and glad of your decision! Hopefully they can relieve your discomfort (medical jargon fer pain).

 

[garyoa1]

Ok, riddle me this, oh great guru's uv da forum...

Have a TV with two HDMI in ports. (worked fine for years)
One port (HDMI 1) getting shaky. That is, cutting out, clipping, whatever u wanna call it. Have to wiggle the cable to get it back working.

Now, I obviously need two ports One for tv (from main tv), one for monitor. (HDMI 2 works fine for monitor)

Got a switch. Plugged into hdmi 2. Nope. No video at all. Selecting either cable on the switch does nothing video wise. I can select source with the remote but hdmi 2 doesn't even show up with it plugged in.

Since both are marked "input" For the tv side I'm assuming I need a 2 (or more) in ports and instead of an out port... another in port "instead" of the outport. However, doesn't seem to be any such animal.

Or am I just completely insane? (hmm... just answered my own question on that last sentence)

 

[jbnuke]

Welcome to the porches jb ... I see you found the front porch too.



Never got beyond a simple twisted coil ... then went right back to single strands. You wrapping your own Claptons?

No im too lazy. Got premade 28 gage nicrome wrapped with 32 gage kanthal.

 

[Kenna]

Good Morning, not doing so good today this is the worst my leg has felt since I did this. Definately going in on Monday.
Omaha Omaha I think the 8' quater back is going to win if Denver can't hurt a few guys.

I'm sorry, Legs! But really glad you are going to the Dr about it!

 

[therussellv]

Ok, riddle me this, oh great guru's uv da forum...

Have a TV with two HDMI in ports. (worked fine for years)
One port (HDMI 1) getting shaky. That is, cutting out, clipping, whatever u wanna call it. Have to wiggle the cable to get it back working.

Now, I obviously need two ports One for tv (from main tv), one for monitor. (HDMI 2 works fine for monitor)

Got a switch. Plugged into hdmi 2. Nope. No video at all. Selecting either cable on the switch does nothing video wise. I can select source with the remote but hdmi 2 doesn't even show up with it plugged in.

Since both are marked "input" For the tv side I'm assuming I need a 2 (or more) in ports and instead of an out port... another in port "instead" of the outport. However, doesn't seem to be any such animal.

Or am I just completely insane? (hmm... just answered my own question on that last sentence)

Try 2 things
1 try different hdmi cord in 1, problem could be in cable end

2 try channel search with switch plugged into 2 and video running on it

Last stinkie 10/15/2013

 

[bigbells]

I'm currently uploading the same video in the highest bandwidth that YouTube allows, and will post the link when it's done uploading

 

[Uncle Willie]

Ok, riddle me this, oh great guru's uv da forum...

Have a TV with two HDMI in ports. (worked fine for years)
One port (HDMI 1) getting shaky. That is, cutting out, clipping, whatever u wanna call it. Have to wiggle the cable to get it back working.

Now, I obviously need two ports One for tv (from main tv), one for monitor. (HDMI 2 works fine for monitor)

Got a switch. Plugged into hdmi 2. Nope. No video at all. Selecting either cable on the switch does nothing video wise. I can select source with the remote but hdmi 2 doesn't even show up with it plugged in.

Since both are marked "input" For the tv side I'm assuming I need a 2 (or more) in ports and instead of an out port... another in port "instead" of the outport. However, doesn't seem to be any such animal.

Or am I just completely insane? (hmm... just answered my own question on that last sentence)

Kinivo Review 2016 | Best HDMI Switcher

http://www.amazon.com/FarSail-FS040...786988&sr=8-2&keywords=multi+switch+hdmi+2+in

In From Source / Out to Display device .. I'm assuming you want to use the one good HDMI input on the TV and not futz with the shorted input ..

 

[garyoa1]

Try 2 things
1 try different hdmi cord in 1, problem could be in cable end

2 try channel search with switch plugged into 2 and video running on it

Last stinkie 10/15/2013

bin there dun #1.
As far as search... maybe. But even with only the computer plugged in I get nothing.

 

[garyoa1]

Kinivo Review 2016 | Best HDMI Switcher

In From Source / Out to Display device .. I'm assuming you want to use the one good HDMI input on the TV and not futz with the shorted input ..

tanks, Unc. But I believe HDMI is only one way. The computer is obviously an out and the main tv has a few hdmi ports. 3 in and one... out! That's what works this tv. (cables would be bi-directional)
Oh, and this tv also has a dvi port which goes to the server. So even replacing the tv would be an effort in futility it seems.

 

[Uncle Willie]

Tanks, Unc. But I believe HDMI is only one way. The computer is obviously an out and the main tv has a few hdmi ports. 3 in and one... out! That's what works this tv. (cables would be bi-directional)
Oh, and this tv also has a dvi port which goes to the server. So even replacing the tv would be an effort in futility it seems.

Yeah, however, there are DVI to HDMI adapters, that, of course, won't pass thru sound .. what do you use the TV HDMI out for .. ??

Also, the second link is a Matrix device .. check it at

Amazon.com: FarSail FS0402 4K x 2K HDMI Matrix 4 In 2 Out video audio distribution amplifier With IR Remote Control,Supports 3D MHL SPDIF ARC Audio Setting: Electronics

Or this one ..

4x2 Matrix HDMI® Powered Mini Switch w/ Remote - Monoprice.com

 

[subwayaznm]

Wismec dna200, .39 ohm dual coil claptons in a turbo v3 enjoing some muffin man right now. Getting ready to make myself a diy mix.

Sounds like a Sweet setup Jb, let us know please how that DIY comes out and what your flavor profile ends up being. Enjoy

 

[clnire]

Just a gloomy, cold afternoon. Calls for a nap. Before I do, however, I wanted to say WELCOME JB! And legs, I am glad you are going to the Dr re your leg. Hope he can help ya feel better fast. Zzzzzzzzz

 

[garyoa1]

Yeah, however, there are DVI to HDMI adapters, that, of course, won't pass thru sound .. what do you use the TV HDMI out for .. ??

Don't need sound on the server. The DVI works fine for that. There is no hdmi out on the tv. Only in. Now the main TV has an hdmi out. That's what I ran the cable to for this tv. (Won't work if I try to use an hdmi in port from the main tv)

So essentially, this tv is a server monitor, a third computer monitor and a tv. All of which work fine except for the hdmi 1 being flaky for the last few months. (I can just change source with the the tv remote)

By the way, tried 2 switches, same result. Like I said, I found it odd that you're supposed to plug an out port into an in port on the tv. But assumed it was only a pass thru anyway.

 

[umanbean]

One port (HDMI 1) getting shaky. That is, cutting out, clipping, whatever u wanna call it. Have to wiggle the cable to get it back working.

Have you tried aerosol contact cleaner, something like Deoxit D5, on the HDMI 1? If wiggling the cable makes a difference, sounds like it may just be a bad connection probably caused by oxidation or corrosion?

Blues!

Yeah, baby!!

Just keep your balls and fingers outta 'em!

Anyway, you should always wash your balls and fingers the old fashioned way - with a stiff brush!

This morning's flight uploaded to YouTube at lower resolution than normal,

LOVE the soundtrack! That is one of my all-time favorite music videos... won a handful of awards after it came out... stop-action I think they call it?... maybe some clay-mation mixed in too. Anyone who's never seen it, search youtube for 'Sledgehammer' Peter Gabriel - click the first one... turn it up.

Here, playing it right now so, I'll just stick it in:

 

[garyoa1]

Have you tried aerosol contact cleaner, something like Deoxit D5, on the HDMI 1? If wiggling the cable makes a difference, sounds like it may just be a bad connection probably caused by oxidation or corrosion?

No I can see the connection itself wiggle around when I move the cable. Really loose. HDMI2 is solid.

 

[jbnuke]

Sounds like a Sweet setup Jb, let us know please how that DIY comes out and what your flavor profile ends up being. Enjoy

Changed up juice... lol vaping one of my diy... equal parts custard, vanilla, and root beer... nice vanilla custard inhale with a hint of root beer on the exhale... thinking about upping the root beer on the next batch to bring it out more.