I'm thinking that the pipe is using a 510 to ego adapter on it. I have a few of those, so no problems.
Heh - the Hendrix will probably be a fused coil!!
Older Folks and Vaping Front Porch - Part 2
- Thread starter MikeE3
- Start date
- th_trl_thread_readers 0
- Status
Heh - the Hendrix will probably be a fused coil!!
Help, someone tell me what's going on with my iTaste, or the cleearo... I wanted to put some more juice in it, so I did that, put it all back together just the way it was, turned it back on... and now it won't register, the readout shows "non" and it won't vape at all... the lights are coming on, but nothibng is happening!! help!!! what do I do???
Andria
Andria
Step one take a nice deep breath
Step two take the clearo off unscrew the bottom and make sure the head is screwed all the way into it. SOmetimes they come loose when filling etc.
If that doesn't fix it let us know
You are correct. They are misrepresenting the threading. Both the pipe and the silencer have just 510 threading. You would need an adapter to us a tank with other threading. I had a 510-ego adapter at home so I'm using a Aspire BDC Maxi tank on mine. Vapes great and looks great!!!
I ordered a Smok Gold pipe today. I also have coming a gold Artemus Carto, gold cone, gold drip tip extenders and a gold skull drip tip. I think its going to look great once all comes in. Also working on piecing together a Gandolph pipe. I have a King epipe on order and an 8" churchwarden. Next week will be Christmas for me!!!
Last edited:
Step one take a nice deep breath
Step two take the clearo off unscrew the bottom and make sure the head is screwed all the way into it. SOmetimes they come loose when filling etc.
If that doesn't fix it let us know
No... I did it three times.. took it off, unscrewed the bottom part where you fill it, put it back, screwed it down real tight, screwed the clearo back on the itaste real tight... it's still saying "non" in the readout, and it won't vape at all.... what happend to it? I just put some juice in it, and I did it down the side of the plastic, not down the middle, I watched it... but I noticed when I had put it back together the first time, there was some ejuice on the mouthpiece... oh damn I hope I didn't kill it!!!!
I've been tracking down some of those flavors, and I've found the raisin in a lot of places, but does anyone know where I can find walnut? I've found black walnut, but that taste is a little too strong for this cake, as I found out one year when I used them.
Here you go 10 ml Walnut Flavor Extract 10ml 1.79
Last edited:
Well, it's kinda working, but it's strange... it says the first reading whn you press both buttons is the resistance of the attached load? it's reading 4.5 and I don't think that's right?
edit: and a minute later, it's showing 6.2? that's bizarre!!!
edit: and a minute later, it's showing 6.2? that's bizarre!!!
it will vape, but *barely*... it's less even than the eRoll... which thank god I still have charged!!!!
sweetie the HEAD is screwed into the BASE on the inside
I wasn't asking if the base was tight. I was asking if the head was tight in the base.
Something is not making the correct contact. SO starting with the atty side we check to make sure the head is installed correctly. THen we move on to more complicated things.
I wasn't asking if the base was tight. I was asking if the head was tight in the base.
Something is not making the correct contact. SO starting with the atty side we check to make sure the head is installed correctly. THen we move on to more complicated things.
If you get juice in the center, remove the clearo from your device, hold a vaper towel over the bottom, and blow the excess juice out that way.
Also, check the center pin on the device and make sure it didn't get pushed too far in.
Andria NEVER screw an atty onto the iTaste REAL TIGHT. You want it just snug NOT tight. Tight and you risk pushing the pin down too far. It can be fixed but why mess with it if it is avoidable.
Before you panick IF my check the head tightness doesnt work then you probably HAVE pushed the pin down on the iTaste.
THis is how to fix it.
Center Pin Issue - Fixing a non firing eGo battery - YouTube
well I didn't really force it, I just made sure it was completely tightened.
I opened it up again and did the blowing thing; I noticed that the head part, that post sort of thing? had juice on it, so I wiped it off with a paper towel... put it all back together again... not forcing it just making sure its completely tightened... and at first it was back to "non"... now, the R is showing 3.1... that's more in the realm of the truth, isn't it? I really don;t know what the R should be... it will make vapor if I puff at it, but it doesn't really taste like anything, just blah
the R keeps changing... 5.something.. 4.something... down to 3.1... I don't know what's going on, I really don't!
that resistance sounds a bit high did you try increasing the voltage/wattage a little bit?
strike that you got a bad connection
try to pull the pin down a bit on the clearomizer
if that doesn't fix it pull the pin up a bit on the itaste
see the video I posted a bit up
EDIT: Don't panic we ALL tighten stuff down too much at some point and have to learn the finer points of pin pulling
strike that you got a bad connection
try to pull the pin down a bit on the clearomizer
if that doesn't fix it pull the pin up a bit on the itaste
see the video I posted a bit up
EDIT: Don't panic we ALL tighten stuff down too much at some point and have to learn the finer points of pin pulling
Last edited:
Geez! Every time I pop in there is 10 more pages!
Guess I'll watch PBusardo videos since I don't know what his imaginary color is.
Guess I'll watch PBusardo videos since I don't know what his imaginary color is.
'Lift' the center 'pins'/contacts (topper and PV) just a smidge with a jeweler's screwdriver/dental pick/pocket knife tip. Won't take much, just a lil'... Just gently 'pry' up around the contacts.
REAL TIGHT is good fer engines, not vaping gear!
REAL TIGHT is good fer engines, not vaping gear!
Ok... Let me try.
Take the bottom off of the clero.
Unscrew the WICK from the bottom
Screw it back in nice and snug
Screw the bottom back onto the clero
Screw the clero onto the battery device
Does that work?
That is what Myrany was talking about first
Sometimes the WICK unscrews from the bottom from the inside
Last edited:
- Status
Similar threads
