You gettin all this John. Like I said it looks a lot more complicated then it really is. Once you get a handle on it it's a piece of cake.
Older Folks and Vaping Front Porch - Part 5
- Thread starter MikeE3
- Start date
- th_trl_thread_readers 0
- Status
Ok, looking at the tfr values at each of the first 3 splits in your materials graph your effective tcr values have been moved(curved) from .000879 which is the correct tcr value for 316lL ss to @ .00099. No wonder it gets warmer at any given set temp. That explains that part of your observation.
Now on the flavor part: According to your device monitor graph you are blasting past those first three curve splits in less than 1 second after starting your vape so I'm having a little difficulty in seeing how that first 1 second could effect your flavor when your preheat power forces the coil to set temp that quickly. Maybe it does on a tootle setup where overall applied power is so low. To be honest I was expecting to see your dm graph show more time to reach set temp; that way there would be more time for the first three splits to effect flavor.
OK, obviously ya got da vapin' AlGoreRhythm down... now concentrate on a cancer cure! Either dat or work on reducin' global warming via reducin' cow pharts (aka methane)...
Seriously, ya guys/gals are waaay beyond my tootle puphphin'. Don't get me wrong... I phind it phascinating! I may get dere at some point. But fer now; rah, rah, ree, ya dun lost me...
Vape on and keep postin'!
LMOA!OK, obviously ya got da vapin' AlGoreRhythm down... now concentrate on a cancer cure! Either dat or work on reducin' global warming via reducin' cow pharts (aka methane)...
Seriously, ya guys/gals are waaay beyond my tootle puphphin'. Don't get me wrong... I phind it phascinating! I may get dere at some point. But fer now; rah, rah, ree, ya dun lost me...
Vape on and keep postin'!
I'm a wee bit OCD huh? Rah rah ree, kick'm in the knee; rah rah rass, kick'm in the other knee!!
LMOA!
Whoa, absolutely not!
Geeze, just ask 'round 'bout sum of our porchers' DIY baby steps. Dat's not even countin' a few years ago wid carts/cartos/tanks/wicking/etc.
No, I truly appreciate our porch 'xperts sharing their knowledge; especially da newer capabilities! Guess I've just kinda settled into my lil' comphort zone. Nonetheless, can always learn sumpin' new... (keeps me humble)
Hey, BTW, dat's why we have our porches!!!
Oh no, I'm no expert. I'm learning right along with the rest of ya. I'm just quick to share what I've read or heard, sometimes too quick, then I have to ask for forgiveness for spreading bunk info.
Oh no, I'm no expert. I'm learning right along with the rest of ya. I'm just quick to share what I've read or heard, sometimes too quick, then I have to ask for forgiveness for spreading bunk info.
Hey don't feel bad, you could be stuck in a house with 12-15 loud happy little 7-10 yr olds wired on ice cream and cake, celebrating your Grand daughters birthday... standing in a closet with a laptop... typing...
ETA: forget the part about the closet, its full of coats!
I'm cleaning up my materials list in escribe now to download .csv files from SE for ti, nife and ss to see how well they work as compared to flat line linear tcr settings. The csv files are supposed to compensate for non linearity of the tfr for each metal type. I remember from the "beyond ni200" thread that some preferred running csv files while others preferred running straight linear tcr. There were some problems with SE csv files back then but folks are telling me that they have been corrected. We'll compare notes in a day or two huh?
@cigatron
I haven't tried it yet I was having problems with one of my Tobeco KF V5's I changed the 3 Orings on the head cause it was allowing a little juice out and I used the ones that came with it and it kept wanting to flood. I took those off an put the ones that I got from the Oring store and Voila. No more flooding. Guess you can't trust everything
I haven't tried it yet I was having problems with one of my Tobeco KF V5's I changed the 3 Orings on the head cause it was allowing a little juice out and I used the ones that came with it and it kept wanting to flood. I took those off an put the ones that I got from the Oring store and Voila. No more flooding. Guess you can't trust everything
I had to take it completely apart anyway to get the Jergens hand lotion taste out of it from a flavor I tried so figured while I was in there might as well change those Oring since it made such a diff on my Authentic.
That's the correct tfr @ 800°f for 316 elite ss. You will have to turn your temp setting up a little higher to get the same vapor heat level as the csv file though because the tfr values are lower in the "vaping temp range". I'm interested in hearing your thoughts on vape quality and flavor between the two settings.
Hey I was going to tell you the way I get more .ecig files on is, IDK if you got 1.2SP3 yet but I open it up without the mod attached and add it then since there is only 4 listed then go to General and find that one and substitute it for one of the 5 NI200 ones and save it to the file on my computer then put back the one that was on there. Then when I connect my device I just have to load file and it's right there to load in place of the old one. So everytime I start Escribe I have 4 empty spots. I guess V1.2SP3 is the only Escribe now. Evolve got rid of all the rest or at least that is what I heard it is for all the DNA's that use Escribe from the 60-250
Yeah I like it too. It's kind of neat going in and seeing all the manufacturers setting. It's the only one I've used and I think it is really neat all the things you can change on it. I've been having a lot of fun with it learning what you can do. It's pretty amazing. Haven't gotten into changing the screens yet. Maybe when I have more energy. But I like how you can customize things just the way you want to.
Is that only for the VTC Mini? I can't find that special listed anywhere.
I just used the freeze-dried meal worms that we had on hand for feeding the fishies in Mama's aquarium.Didn't matter much if they stayed on the ground.
Hmmmm... maybe start with some (INW) Biscuit, (CAP) Waffle, and (LA) Butter? Not sure if it would come out exactly as you're hoping, but I imagine that it would get you fairly close.
Didn't know they sold those. I'll get some, thank you!
Just thought I'd so spot check to make sure you late owls were behaving yourselves.
I thought we didn't allow people that behaved themselves on the porches.
Over a year after quitting smoking we had to leave the house quickly. Grabbed my stuff and was frantically searching my desk for a lighter. Husband had to remind me I don't smoke anymore. Odd how those habits stay with you. I can walk out of the house without an inhaler no problem, and that allergy has been going on into its 26th year.
They should face serious criminal charges for many things that they do "routinely." A story tonight states, "Proposed state policies intended to control the opioid abuse epidemic over the past decade have faced a $3.7 million roadblock — the amount of money spent by drug companies and related advocacy groups to influence New York lawmakers." Doesn't make it easier for people in chronic pain to get help, just junkies.
Quit smoking? Use the overpriced BP stuff we tell you to, not anything that actually works. Have allergies that will kill you, some which might be airborne and you can't defend yourself against? Sorry, some money ***** thinks her paycheck is more important than your life. Literally. Sick beyond words over people who think making the almighty buck is more important than the people they serve.
I'd wish them all a horrible disease but they will be the only ones with free access to a cure.
Even I've never been called a hen. I give up, who is your avatar? It looks so familiar but I've never been able to place her.One minuscule misplace backspace and you are screwed on the multi-quote thingy. We've all done it, you're now officially a member of the club.
From another thread: 2 day flash sale: 20% off everything, thru Sun. Code: FLASH20
Between this thread and the stocking threads - I cannot decide which one is more corruptible...
I'll vote for this one but only because it's been going years longer.
I suppose we can start mixing this in with all the posts?
Um, shut up.
From everything I've read here, even from you, it is. Honestly never knew how different everyone was until coming to ECF. Now I'm completely baffled by the popularity of Bic Macs.
Nah! Unicorn Poop is better.
Whatever happened to Bo Boas Bounty (sp?) It was the thing, now I never hear about it.
OK, obviously ya got da vapin' AlGoreRhythm down... now concentrate on a cancer cure! Either dat or work on reducin' global warming via reducin' cow pharts (aka methane)...
Seriously, ya guys/gals are waaay beyond my tootle puphphin'. Don't get me wrong... I phind it phascinating! I may get dere at some point. But fer now; rah, rah, ree, ya dun lost me...
Vape on and keep postin'!
Agree. This thread is a gold mine of information. I read it all, 99% goes over my head. I love 'em for it but unfortunately/fortunately, I'm easily entertained with tootle puffing. I know there is probably something better out there for me but think it's to late with The Reaming being what they are at present.
That's priceless! It's essentially what I do at my parent's place to get away, post and vape--except they are in their 90s.
- Status
Similar threads
