Older Folks and Vaping Front Porch - Part Four

Status
Not open for further replies.

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
Oh and I've dialed in my juice usage somewhat I finally read the manual which someone posted online and 2 full turns is wide open I am running it at 3/4 of a turn now and the flavor is not quite as defined as 2 turns but it is still really "superb". And these are the nicest topfill around really works well.
 

Semiretired

Vaping Master
ECF Veteran
Sep 24, 2011
5,404
58,647
Middle Georgia
What one did you get? I've got a bunch of 18650 batts I no longer use for vaping. Been thinking about a flashlight that uses them.

I'll try to remember to look at it when I get back home next week... On the road again!!! :D Hey, I pay taxes for them - might as well get my money's worth... :D:lol::lol:
 

Iffy

Vaping Master
ECF Veteran
Verified Member
Feb 3, 2011
9,626
79,411
Florida Suncoast
Any you folks seen the new eleaf mod, the iPower? Great looking mod, 80w with a 5000 mAH internal battery.l

Thanx MAD fer da link. But like others here, I'm now lookin' fer 18650 replacement PVs. Will admit I have a couple of handfuls of da iSticks and luv 'em, especially da TC40W (fer it's 'stealth' mode!) Dat's not counting a 'few' mechs...


I ordered 2 Provari minis on 7/4 and received tracking info today.

D-T, warm welcome to porches! Do hope ya enjoy your stay!

BTW, ya got quite a few Provari fans here.
 

clnire

Vaping Master
ECF Veteran
Verified Member
Jan 15, 2013
7,719
73,217
Florida
The K3 mini is a great tootle puffer, but pretty tight draw... I think it's like 0 holes on a Stumpy. ;)

For the Mini 3, if you take out the 510 screw there is a little screw inside you put a screwdriver in and turn the screw for airflow adjustment. then replace the 510 screw. It has 4 air flow holes -
 

garyoa1

Ultra Member
ECF Veteran
Verified Member
I'll try to remember to look at it when I get back home next week... On the road again!!! :D Hey, I pay taxes for them - might as well get my money's worth... :D:lol::lol:
Wait... u get sumpthin just fur payin taxes? WoW! Wudda country!
 

MikeE3

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Aug 23, 2011
8,635
114,591
Downingtown, PA
I ordered 2 Provari minis on 7/4 and received tracking info today.

You're having a horrible string of bad luck. Hope things turn around for you soon.

Welcome to the porch Down-Time. One can never have too many Provari's. ;)
 

FlamingoTutu

ECF Guru
ECF Veteran
Aug 5, 2013
11,119
1
57,467
In the Mountains
Gary, feel really stupid now, didn’t see the part that you don’t drink because I was distracted by the large print in your post. How about cake?

tumblr_nesjefo7gk1sc386bo1_1280.jpg


Only thing that seems conspicuously absent is bacon, so a side order of that.

mound-of-bacon.jpg


Add liberally as needed.

I've had those days and they really, really suck. Hope you are have a much better day today. :)
 

garyoa1

Ultra Member
ECF Veteran
Verified Member

garyoa1

Ultra Member
ECF Veteran
Verified Member
Gary, feel really stupid now, didn’t see the part that you don’t drink because I was distracted by the large print in your post. How about cake?

tumblr_nesjefo7gk1sc386bo1_1280.jpg


Only thing that seems conspicuously absent is bacon, so a side order of that.

mound-of-bacon.jpg


Add liberally as needed.

I've had those days and they really, really suck. Hope you are have a much better day today. :)
Drool.gif
 

FlamingoTutu

ECF Guru
ECF Veteran
Aug 5, 2013
11,119
1
57,467
In the Mountains
oh my ... another gadget for the vape tool box. Presenting a battery operated coiler.



(it's available at 101vapes)

Already have a new model but it looks kinda chintzy. 510, just put it on your mod. Only has the posts.
5246102-4.jpg

$15.36 Coil Magician Styled Coil Jig Tool Kit for E-Cigaretes (3 Pieces) - aluminum / 2mm + 3mm + 3.5mm coil jig heads at FastTech - Worldwide Free Shipping
We bomb-proof 'em as pups. Problem is, first couple of fireworks that go of it's all wahoo! By the third or forth one El Whacko is rolling around and whining because he's board and no one is paying attention to him. :facepalm: The deer came into the yard to feed during the fireworks. Completely unfazed. For two decades I've felt terrible for them every 4th. Turns out they couldn't care less.
Just got back from local vape shop and a couple of things came to my attention. To all InIndiana vapers they have put a pause on enforcement of the e-juice rrgs as of now they will not be inforced for 60 days then for the next 120 days only warnings will be issued. They say the reason is to check the FDA regs. The other thing I find interesting is there is no mention of this on Hossier vapers. I have to wonder why?
Was going to ask if you were sure your B&M knew what they were talking about...
And another, from today.....
Nice find! Hope those lawmakers get what they deserve in the end. :grr: Feel so bad for those impacted by the political corruption in Indiana.
I ordered 2 Provari minis on 7/4 and received tracking info today.

You're having a horrible string of bad luck. Hope things turn around for you soon.
Welcome to the porch DT! Yep, not things as good as a few Provari in your stash. :D
 

DancingHeretik

Dancing in the Chaos
ECF Veteran
Verified Member
Mar 20, 2011
8,837
62,106
San Antonio, TX

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
That be the ribbed triangular one? Have two, still in use, still work fine. Although I do put a full size KF on top :)

Yep, dandy tootle rig. Use the full M5 tank on the KF and you almost have to tie it down, it's so light! :lol:
Speaking of M tanks, Madvapes has them in stock & has extended their July 4th sale. 15% off sitewide excluding juice. Ends tonight. The tanks are 1.99 less the 15% is 1.69.
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
The K5 is a great vape but it's not a wide open AF. The Tobeco clones I have heard really good and some bad about. IDK for sure mine are sitting at Camano Island. Won't really have a chance to build one till Tuesday or Wednesday. Most everyone really likes them I have just seen 1 guy so far that didn't and that was because the Pos and Neg post holes weren't drilled out and threaded long enough for the longer screws and also heard the screws are really cheap which I wonder if he didn't mean the holes. Who would cut corners on a screw. Also the clone has Pyrex glass the authentic has Quartz which I have heard is pretty strong. One guy dropped his authentic V3 which does have less glass but no problem. I love my authentic just hope the clones are as good as most everyone who has got theirs says. They say vapingwise exactly like the authentic. I think I may go for the authentic glass tanks and parts kits for the clones also. And I have heard the MTL kits are excellent really can dial in your V5. I been busy with other stuff but I'm going to that thread now to see how they like them after a day with them, the clones that is the authentic I can't put it down the flavor is way better then anything I have tried before and like I say with the MTL really supposed to be even better everyone is saying they like the middle size the best the kit comes with 3 sizes.
I got mine todayn coiled & wicked it bit not filling it until I get a juice order on Friday. I ordered some new to me premades from Giants sale. I did use unflavored to juice up the wick & coil & hit that. That 4th airhole setting is a really nice DL hit. This could have neen a mistake since I have 18 L+v2's.....
 
Last edited:

MikeE3

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Aug 23, 2011
8,635
114,591
Downingtown, PA
I got mine todayn coiled & wicked it bit not filling it until I get a juice order on Friday. I ordered some new to me premades from Giants sale. I did use unflavored to juice up the wick & coil & hit that. That 4th airhole setting is a really nice DL hit. This could have neen a mistake since I have 28 L+v2's.....

Geez-oh-man. 28 of 'em. I haven't gone for a KFV5 'cause I have 9 V4s. What would I do with those 9 plus spares kits & spare tanks I stock piled for the deeming if I liked the V5 better. I keep telling myself I'm quite happy w/ the V5 vape and don't mind all the parts.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread