You do know that you can fill a KFL by removing the top cap, right? I've done it a couple of times, accidentally. I always fill my KF 3.1s using the top fill method. The force of habit is what caused me to fill the KFL from the top.
Older Folks and Vaping Front Porch - Part Four
- Thread starter MikeE3
- Start date
- th_trl_thread_readers 0
- Status
You do know that you can fill a KFL by removing the top cap, right? I've done it a couple of times, accidentally. I always fill my KF 3.1s using the top fill method. The force of habit is what caused me to fill the KFL from the top.
Just make sure you have the chamber & chimney tight so that you can remove the top cap.
You have a v4 with a fill port?
NO, I use 3.1s
I am not going to carry around a little screwdriver to jab myself in my pocket with.You get used to it.
And an extra screw or two of course.
I likes it. Vaping on a fully charged batt in my New Yorker I calculate 14.7 watts. Wide open on the air is about right. A bit less flavor than my modified T3's though using exactly the same juice. Using the factory 1.2 coil. More vapor but less flavor compared to a T3 and better lung hits on the Mini.This should be interesting.
(in a good way)
Nancy, sorry I'm late with this, welcome to the porch! 
Glad that petition reached their goal and they are still racking up signers.
I miss ECF. 
Totally OT, but a lot of people see their doctors frequently. Went to see mine for a bladder infection today. Had to pee in a cup, couldn't (the situation was ridiculous but I'll spare you the details). Dr. comes in and says there was no infection in the sample I gave. Said I hadn't given one. Turns out some guy went into the restroom and peed in the cup for me.
Glad that petition reached their goal and they are still racking up signers.
After they got the tower fixed, the "fine tuned" it the next day. After that, a comcast substation had a fire. Right now it's working slower than dial up.
I miss ECF. I'm listed and have been since I'd been off them for a year, as a nonsmoker or non tobacco user. Vascular Dr. wasn't real enthusiastic about it but that's what I'm listed as.
Totally OT, but a lot of people see their doctors frequently. Went to see mine for a bladder infection today. Had to pee in a cup, couldn't (the situation was ridiculous but I'll spare you the details). Dr. comes in and says there was no infection in the sample I gave. Said I hadn't given one. Turns out some guy went into the restroom and peed in the cup for me.
Now that is making me interested in the subtank mini.
Me either.
Not likely, just give me a royal nic fit.You get used to it.
I don't mind filling them, just stick the needle in and push in the plunger. What I do mind is getting the screw to stand up so it will screw in. Might try magnetizing my screwdriver.
That sounds like a good idea it might just stick to the screwdriver while you are filling and not get lots as well.
If you use a New Yorker/Manhatten it will stick to the bottom of that sucker. Strong magnets.
I do fillups while out and about a needle would just not work out too well. Maybe one of those little needle bottles, but I am just getting to like and use unicorn bottles.
Turns out some guy went into the restroom and peed in the cup for me.
WTEphph?!?!
There would Hades to pay from da doc's office up to da state medical board and insurance commission!!! Do believe that's a criminal offense at least at two levels.
Just to keep my post vaping related, several days ago, dropped my nic from 15 to 12ml on two of my daily vapes. So far, so good!
But maybe it was just for kinks and not a drug test or anything?WTEphph?!?!
There would Hades to pay from da doc's office up to da state medical board and insurance commission!!! Do believe that's a criminal offense at least at two levels.
Just to keep my post vaping related, several days ago, dropped my nic from 15 to 12ml on two of my daily vapes. So far, so good!
Yep-- won't work. When I go out and about, I check for both nemmys, fresh batteries, full Orchids, and never have problems. I do try to use my fingers to get the screw into position, just need to practice that better, I guess. Could try tweezers or retractor, maybe.
I don't use those little silver screwdrivers that come w/ some of the atty's. I use a smaller but bigger than those and the fill screw fits good enough it stays on the screwdriver when I take it out. Then just pick up the screwdriver w/ the screw on it and put it back into the hole and secure it. I just tilt the atty almost horizontal for this to work w/o the screw falling off.
I don't use the infamous blue ones either. I use eyeglass screwdrivers. I am going to a hardware store tomorrow, and hope I will remember to take a look at them-- I think the eyeglass screwdrivers are about the same as the infamous blues, but longer. Will try that, thanks.
- Status
Similar threads
