Older Folks and Vaping Front Porch - Part Four

Status
Not open for further replies.

garyoa1

Ultra Member
ECF Veteran
Verified Member
Game time:D

Deserted island (with an outlet :2cool:)

Pick one power supply, one atty and one eliquid.
Oh, I can do that. Have an ADV that I use most of the time. The other flavors break it up now and then.
 

MikeE3

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Aug 23, 2011
8,635
114,572
Downingtown, PA
welllllll I have mech mods and am buying a couple of these this weekend
WISMEC OLED Screen VW Mod Control Head
I also have a couple of other / smaller ones that are VV.
that way I don't have to worry about mech problems.

Interesting! The description isn't clear (at least to me) ... is it adjustable up/down from 30 watts. And does it 'buck' as well as 'boost'?

Game time:D

Deserted island (with an outlet :2cool:)

Pick one power supply, one atty and one eliquid.

Radius ... KFV4 ... Janet's Heaven (Pear w/ a touch of Blueberry). I have two ADV I switch between ... the JH and a Pomegranate. If I had to go to one it would be the JH.
 

garyoa1

Ultra Member
ECF Veteran
Verified Member
Well... What are they? ;)
My ADV is a chocolate. The others... soup to nuts. Cherry, vanilla, watermelon, orange, pina colada, even tobacco. ADV's Usually on an MVP 3 or a vv3. But there are a couple provari's, MVP2, MVP20, svd, svd2, tesla, coolfire (1 and 2) and even a pipe type.
And yes. The same juice in a different mod... tastes different.
 

Alter

Ultra Member
ECF Veteran
Verified Member
Apr 2, 2013
2,711
6,942
BC Canada
Game time:D

Deserted island (with an outlet :2cool:)

Pick one power supply, one atty and one eliquid.

If I had to choose I would take my provari, kanger subtank with RBA and for juice it would be Hangsen Desert Ship with RTS TA and acetyl pyrazine mix, love that mix...can vape it for the rest of time if I needed to.
Right now I'm picturing Skipper and Gilligan sitting at a thatch table, arguing trying to recoil a subtank along with Professor designing a coconut box mod...LOL
 

MattB101

Ultra Member
ECF Veteran
Jul 9, 2012
2,560
74,146
67
Deerfield Beach, FL
Nope - the Riders aren't something we need in the future ... whatever the future holds. I though about passing them along for starter setups ... but then the person would need to purchase a batt charger for the 14500s. I think something like an Ego-1 or iStick 40 is a better starter setup.

The only thing I'm holding onto are a 4 Sigelei Zmax mini's a couple full size ones and 2 Nemy Clones. These just never get used so i consider my vapepocolypse stash. I'll likely get rid off of the full size Zmax's because I have custom tube extensions for the mini's to use either 18490's or 18650's.

90% of my vaping is done w/ a Provari P3 and a Radius both topped w/ KFLV4s. Janet's been lenient with my purchases so just sitting about for occasional use I can chose from 5 Super-T's, 2 Poldiacs, and a Nemisis for mech vaping and from 3 other Provari's, a VaporShark DNA40, and a bunch of Chinese box mods. (And this is just my stuff). So I'm not really looking to buy more PV's even with the upcoming 'Deeeming' looming over our heads. (oops, not quite right .. after the holidays early next year I'm looking to get another Radius ... then I'm done honest!).

Oh yeah ... I've got enough enclosures, boards, parts, wire, switches, etc. to build 4 DNA40 mods. But I lost my desire for temp control devices so these may never get built.



You didn't miss much ... as usual for their head sales ... you were limited to 2 packs per type ordered.



Actually Iffy, most tube mechs will take a kick if you switch to the 'next size down' for the batt. Like an 18650 tube, use an 18490 batt, an 18490 batt use a 18350 batt along w/ the kick.
What boards do you have? Just curious. Glad I'm not a cat as I would have been history a long time ago. ;)
 

MattB101

Ultra Member
ECF Veteran
Jul 9, 2012
2,560
74,146
67
Deerfield Beach, FL
Well, that's great to know. I tried some 18650 tubes a few years ago and had issues. Your info will sure help out da 'mech cautious'!
That is good to know. I'll have to get a couple of 490s. Got three mech tunes and 2 kicks so they wouldn't be wasted. Also fir in my nitecore charger. 18350s are just a touch short but, if I use a stainless nut on the new end they fit fine. I only have a 2 hole charger. Probably aught to get another charger as a hot standby.
 

Boden

Vaping Master
ECF Veteran
Sep 7, 2012
5,516
28,164
Lexington KY
Radius ... KFV4 ... Janet's Heaven (Pear w/ a touch of Blueberry). I have two ADV I switch between ... the JH and a Pomegranate. If I had to go to one it would be the JH.
I picked the P2.5 and KFL (with a beauity ring ;) ) because mine has already survived two years in a war zone and didn't skip a beat.

I dropped it on a tile floor and it cracked the tile.

It's good enough :)
 

garyoa1

Ultra Member
ECF Veteran
Verified Member
That is good to know. I'll have to get a couple of 490s. Got three mech tunes and 2 kicks so they wouldn't be wasted. Also fir in my nitecore charger. 18350s are just a touch short but, if I use a stainless nut on the new end they fit fine. I only have a 2 hole charger. Probably aught to get another charger as a hot standby.
350's fit fine in my nitecore D4.
 

MikeE3

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Aug 23, 2011
8,635
114,572
Downingtown, PA
What boards do you have? Just curious. Glad I'm not a cat as I would have been history a long time ago. ;)

Evolv's ... in the to-do someday-maybe box are 25's, 30's and 40's.

I picked the P2.5 and KFL (with a beauity ring ;) ) because mine has already survived two years in a war zone and didn't skip a beat.

I dropped it on a tile floor and it cracked the tile.

It's good enough :)

I figured I'd go with what I'm vaping currently most of the time. I've got 3 P2.0's all have been updated to the 2.5 board/chip set. Yep, my mini and one of the standard size have been dropped on tile floors and concrete floors. The other standard size is the 2nd Edition Black Chrome finish ... that one gets babied.
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
That is good to know. I'll have to get a couple of 490s. Got three mech tunes and 2 kicks so they wouldn't be wasted. Also fir in my nitecore charger. 18350s are just a touch short but, if I use a stainless nut on the new end they fit fine. I only have a 2 hole charger. Probably aught to get another charger as a hot standby.
I need to get another charger, too. Mine is a nitecore d2, 2 slots. But I seldom use both.
 
Last edited:

Ken_A

Vaping Master
ECF Veteran
Verified Member
Jan 13, 2013
4,876
28,345
Florida
on another note... Took 3 puffs this morning while I was playing Angry Birds. Then went shopping. I got a 2 quart crock-pot (nice and small), a Brita pitcher with spigot. food for next week.
Took out my Christmas decorations and put a couple up. Sat down to turn my security cameras off so they would quit warning me that I was moving around outside...
And when I reached for my PV, could not find it.
Oh, there it is... on that table on the way out the door.
I vaped 3 puffs at 8 am... It's 2 PM. Didn't even realize that I had not had any puffs since before I walked out the door.

now, will someone explain how vaping is an addiction, and not a habit?
:lol:
 
Status
Not open for further replies.

Users who are viewing this thread