Did finally put in the FT order for the coiler and it said would ship on the 16th.=
That means I have time to order mine!
Older Folks and Vaping Front Porch - Part Three
- Thread starter MikeE3
- Start date
- th_trl_thread_readers 0
- Status
That means I have time to order mine!
I'm also pretty sure it means they're using the disabled sea turtle fleet to get it here.
Yes, there is household shopping, El Whacko shopping and then there is vaping shopping. Guess which takes the longest?
Did finally put in the FT order for the coiler and it said would ship on the 16th.
I think we have a winner! The top two photos are from the top and the third is from the bottom.
What on earth would anybody need all of those for if he wasn't displaying for sale and even then only need a couple for the public to fondle and the rest in original boxes for them to take with them.
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
I'm also pretty sure it means they're using the disabled sea turtle fleet to get it here.
The original "slow banana boat from China".
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
Took a closer look, they are pretty much all different and in a toolbox. Reminds me of a salesman's case back when they went door to door. Could be for vape meets and such.
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
Could be he ordered them from FT. When the order didn't show up, he ordered more. Rinse, repeat. Then the turtles came ashore and he got buried. I'm also guessing he's not married.
That was my thought. He may be a DIY juice guy & have different juices in each for sampling.
Looking at the Fastech site & wondering if any of their Kayfuns are any good? a +2, or v3.1. Not ready for a v4 I don't think. Those intimidate me a bit. Anyone know?
One of my 3.1s is from there, and works well, made well. If you go that route, be aware that there are several models, and some have a proprietary threaded drip tip. SOME of those come with a screw-in adapter to use a standard size tip. That's important to me, as I really don't like stainless tips
I'm also pretty sure it means they're using the disabled sea turtle fleet to get it here.
Personally, I think FastTech shipping is amazingly fast!
(username is relevant)
I own this 1:1 KFL+V2 clone, which I understand is actually manufactured by Infinite. It was OK, but I didn't think it had enough airflow, and I didn't think the juice channels were deep enough. This might just be true for most KFLs, though. I have an Orchid V6 arriving probably next week, which I'll post about when it arrives.
I'm vaping one even as we speak. I do like the EHPro and the Tobeco clones but they aren't available at FT. Let me call up my past orders tomorrow and see which of the 5 or 6 different ones I ordered. It works pretty well. I also have an ehpro I like better so let me research where I bought it. Think it was LiteCigUSA but not sure, I like LiteCigUSA, nice folks and great service.
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
Not sure what the clones on fast tech are maybe it says it somewhere or others know.
My kfl+v2 clone is ehpro and its good , even with full air flow it to me is tight but that may suit some people.
Lemo is more airy and you can tighten it but some say the air flow ring can move - I don't have that problem with it at max has not moved.
My kfl+v2 clone is ehpro and its good , even with full air flow it to me is tight but that may suit some people.
Lemo is more airy and you can tighten it but some say the air flow ring can move - I don't have that problem with it at max has not moved.
I can't say much on fasttech except they are really slow but I can say the tobecco is cheaper but not as nice as the ehpro. The ehpro cost more but will come with all three tank designs. I'm talking about the KFL+v2. They both work great. Here's a link to a ehpro
Kayfun Lite Plus V2 Clone by EHPro - 101 Vape
I've dealt with these guys a few times and everything was great. They ship fast and from order to delivery was 3-4 day west coast to east coast.
I have the KF4 by tobecco and it's really nice. Don't count them out they are actually a lot cheaper and easier to coil then the other KF"s. Here's a link to one
Kayfun V4 Clone by Tobeco - 101 Vape
It takes 2 - 3 times filling it to get it down and there's plenty of videos out there to show how to fill it. PBustardo's is probably the best one to watch
https://www.youtube.com/watch?v=1qTz9GG7JTQ
Bottom line 39.99 for the KFL+v2 is at above link the KF4 is 24.99. both work super. I'm kind of a Kayfun junkie.
Last edited:
FastTech usually doesn't tell you, unless it says on the packaging (for example, this 2Six-style mech mod by Tesla). However, many of the more popular items have been carefully investigated, and if you read through the discussion threads, you can sometimes find out.
Thanks PapaSloth - I said not sure in case it says it right there - most of the time I'm looking and thinking of many things so i can miss things.
Sorry it's taken so long to respond. I haven't felt much like posting lately. Welcome to the thread, Modapa!
Are you using the 510s with the little cartridges with the filler material, or are you using the 510s to drip?
It sounds like you're describing the 510-t with the little point and the little tank that holds e-liquid. I like the 510-t atomizers much more than the regular 510s, better flavor. But, I quickly stopped using the little tanks and just dripped instead. It just works better.
There's a whole thread dedicated to dripping on regular atomizers (especially the different variations of 510): http://www.e-cigarette-forum.com/forum/atomizers-cartridges/405910-regular-atty-drippers-dying-breed.html
That would be the place to go if you want to learn more about the many 510 variations available and where to get them. I know they make sealed 510s (which don't leak like the regular 510s). I've never bought those. But, I've seen them mentioned on the above thread.
Right now, I'm trying to stash a few dollars to buy some of the Vapage 510s next time they go on sale. They're not sealed since they're designed for bottom-feeders. But, they're very good atties. I like them.
The Smokeless Image Volts are also very nice. I use them occasionally. But, they are 808-threading instead of 510. And, no one makes 808 atomizers. You'ld have to use cartomizers. But, they are very good cartomizers and cheap. Smokeless Image has their own sub-forum on ECf if you'ld like to learn more about them.
DIY liquid and new rayon wick in the Lemo - So far so good.
Read a lot about not using too much cotton but I'm going good.
Seems to me the cotton is going to absorb the liquid if it comes in contact with the liquid.
Read a lot about not using too much cotton but I'm going good.
Seems to me the cotton is going to absorb the liquid if it comes in contact with the liquid.
Good morning! It's a beautiful day in the neighborhood ...
Forgot to check the mail when I got home yesterday, so I had a lovely surprise when I looked, this morning. Vape-mail! Two 60ml bottles of one juice, and two 30 ml of others. Sweet! They should all steep a bit, but I'm thinkin' to vape one FOOB. Impatient, I am
Quick question: does anyone here accelerate steeping with an ultrasonic cleaning machine? (Yes, I did read some of those threads, but it don't know them, and I do know you. Well, sorta kinda)
Oops. Another question: I see pix of etched glass tanks in various forums. I've googled, but can't seem to locate them. I've also asked, nicely, but the OP's don't respond. Anyone know where I might source them? They're so pretty! Thanks.
Forgot to check the mail when I got home yesterday, so I had a lovely surprise when I looked, this morning. Vape-mail! Two 60ml bottles of one juice, and two 30 ml of others. Sweet! They should all steep a bit, but I'm thinkin' to vape one FOOB. Impatient, I am
Quick question: does anyone here accelerate steeping with an ultrasonic cleaning machine? (Yes, I did read some of those threads, but it don't know them, and I do know you. Well, sorta kinda
)Oops. Another question: I see pix of etched glass tanks in various forums. I've googled, but can't seem to locate them. I've also asked, nicely, but the OP's don't respond. Anyone know where I might source them? They're so pretty! Thanks.
Last edited:
Eciggity has this one by Ehpro with a bigger airflow that they requested. Kayfun Lite Plus v2 by EHPRO (Larger Airflow Hole) - Eciggity
- Status
Similar threads
