Older Folks and Vaping Front Porch - Part Three

Status
Not open for further replies.

MattB101

Ultra Member
ECF Veteran
Jul 9, 2012
2,560
74,146
68
Deerfield Beach, FL
Not sure what the clones on fast tech are maybe it says it somewhere or others know.
My kfl+v2 clone is ehpro and its good , even with full air flow it to me is tight but that may suit some people.
Lemo is more airy and you can tighten it but some say the air flow ring can move - I don't have that problem with it at max has not moved.

The one I use all the time is also an EHPro. Got it from LiteCigUSA. Just checked and their price is $34.99.

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
 

Wolfenstark

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2014
4,815
14,724
Perth , Australia
The one I use all the time is also an EHPro. Got it from LiteCigUSA. Just checked and their price is $34.99.

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!


Mine when i got it was $37 USD. at the time was looking for the ehpro one and a store that delivered to me , oh and the v2 one.
 

MattB101

Ultra Member
ECF Veteran
Jul 9, 2012
2,560
74,146
68
Deerfield Beach, FL
What's that battery site y'all talk about?

I personally like Orbtronics.com. They carry good batteries, even their own branded ones and their service is great. Every time I've ordered batteries I have gotten a 2 battery battery box with them. If you order 4 batteries you get two boxes.

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
 

FlamingoTutu

ECF Guru
ECF Veteran
Aug 5, 2013
11,130
1
57,503
In the Mountains
Ok, update on the quacks juice. I still like the Gizzard Juice best for chocolate. But the new Quack Snack is... (drum roll) ... milk chocolate. Quite pleasant.

This is, of course, according to my taste budz.

I'm curious, what makes making a good chocolate vape so difficult? Since nuts are often added to chocolate, I avoid them like the plague. Is it that the flavor is hard to replicate or because everyone's idea of what a good chocolate tastes like is vastly different?
 

Ken_A

Vaping Master
ECF Veteran
Verified Member
Jan 13, 2013
4,876
28,345
Florida
Good morning! It's a beautiful day in the neighborhood ...

Forgot to check the mail when I got home yesterday, so I had a lovely surprise when I looked, this morning. Vape-mail! Two 60ml bottles of one juice, and two 30 ml of others. Sweet! They should all steep a bit, but I'm thinkin' to vape one FOOB. Impatient, I am :)

Quick question: does anyone here accelerate steeping with an ultrasonic cleaning machine? (Yes, I did read some of those threads, but it don't know them, and I do know you. Well, sorta kinda :))

Oops. Another question: I see pix of etched glass tanks in various forums. I've googled, but can't seem to locate them. I've also asked, nicely, but the OP's don't respond. Anyone know where I might source them? They're so pretty! Thanks.

On "another question":
I sand blast mine, but you can get some really nice ones at
Phiniac Rugged Pyrex Glass Tanks
 

PapaSloth

Ultra Member
ECF Veteran
Verified Member
Aug 16, 2014
1,634
10,080
Portland, OR, USA
Eciggity has this one by Ehpro with a bigger airflow that they requested. Kayfun Lite Plus v2 by EHPRO (Larger Airflow Hole) - Eciggity

Thanks Kenna, that's an interesting find! The problem with the Kayfun Lites, though, is that all of the air has to come up through the center pin. Just making the air hole on the side bigger helps a little, but you really need a bigger airhole in the center pin as well, and the center pin just isn't big enough to accommodate a really big hole. So, I think something like the YouDe Goblin is really just a better choice if you want a lot of air. I mean, look at the size of those air holes. They're massive:

953867.jpg


I'm curious, what makes making a good chocolate vape so difficult? Since nuts are often added to chocolate, I avoid them like the plague. Is it that the flavor is hard to replicate or because everyone's idea of what a good chocolate tastes like is vastly different?

I've only tried TFA Double Chocolate (Clear), which tastes good on it's own, but it tastes more like cocoa powder than like chocolate. I think you need to mix it with creams and maybe sweeteners before it starts tasting like chocolate, rather than like Nestles cocoa mix. I think a lot of the problem in general is that part of the chocolate experience comes from the rich mouth feel you get from the cocoa butter, and that's completely absent when you vape. So, something seems missing.

On "another question":
I sand blast mine, but you can get some really nice ones at
Phiniac Rugged Pyrex Glass Tanks

Very cool! You can also get glass etching cream if you don't have a sand blaster (I don't). Basically, you mask off the areas you don't want to etch, then smear cream over the parts you do want to etch. Let it sit a while, and then wash it off, like so:

 
Last edited:

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
I own this 1:1 KFL+V2 clone, which I understand is actually manufactured by Infinite. It was OK, but I didn't think it had enough airflow, and I didn't think the juice channels were deep enough. This might just be true for most KFLs, though. I have an Orchid V6 arriving probably next week, which I'll post about when it arrives.

Just wanted to say, I really appreciate that you always include links in your informative posts. There are some others that do also. I know it's a bit more of a hassle, but thanks to all who do! I appreciate those who give info without links too, but really appreciate links! lol

Good morning! It's a beautiful day in the neighborhood ...

Forgot to check the mail when I got home yesterday, so I had a lovely surprise when I looked, this morning. Vape-mail! Two 60ml bottles of one juice, and two 30 ml of others. Sweet! They should all steep a bit, but I'm thinkin' to vape one FOOB. Impatient, I am :)

Quick question: does anyone here accelerate steeping with an ultrasonic cleaning machine? (Yes, I did read some of those threads, but it don't know them, and I do know you. Well, sorta kinda :))

Oops. Another question: I see pix of etched glass tanks in various forums. I've googled, but can't seem to locate them. I've also asked, nicely, but the OP's don't respond. Anyone know where I might source them? They're so pretty! Thanks.

Oh yummy! Try that juice g/f. I understand that something will get better as it ages, but to me, if it's not good FOOB, I won't order again. I shouldn't have to wait a couple weeks to get something decent to vape.
Probably not what you were looking for, the orchid has a pretty on it, but it's a plastic tank. Looks a bit like frosted glass though, so wondered if this is what you meant. https://www.google.com/search?q=orc...-Plastic-Tank-Orchid_60094821459.html;350;350

Ok, update on the quacks juice. I still like the Gizzard Juice best for chocolate. But the new Quack Snack is... (drum roll) ... milk chocolate. Quite pleasant.

This is, of course, according to my taste budz.

Meant to tell ya, I did look at them, a bit pricey for me, and they don't have 24nic. But thanks for the link. and I did recall after seeing it again that you'd put the link out before. Thanks!

I'm curious, what makes making a good chocolate vape so difficult? Since nuts are often added to chocolate, I avoid them like the plague. Is it that the flavor is hard to replicate or because everyone's idea of what a good chocolate tastes like is vastly different?

I think perfect FOODS, coffee, chocolate, and bacon are just so good and perfect that they can't be replicated!


I haven't tried glass etching, but always wanted to. Had looked at a lot of videos about it when I was doing my stamping.
 
Status
Not open for further replies.

Users who are viewing this thread