Problem is that that one of those has to be shipped from China while the other one is in the US, and both are needed.
Older Folks and Vaping Front Porch - Part Three
- Thread starter MikeE3
- Start date
- th_trl_thread_readers 0
- Status
Personally I would measure very carefully and just cut 6mm off the 20mm from Florida. in fact if a guy had a junk laptop computer (decent brand) lying around, I bet he could probably find them screws pretty easy.
ETA: lol, and good point!
Had to go look it up. That's a nice compact size w/ a replaceable battery. And what vendor got your money for 'em?
Does a 22mm topper hang over the side?
20 mm is over 3/4 of an inch, which seems kind of long to be found in a laptop. Cutting down a 20 mm long screw is a great idea though.
Who was looking for an Xstar charger? Deb? Been a long day... Got this from vape Deals
The brand new Xtar VC2 Plus Battery Charger has just made its way over to the shelves at VaporKings. They have it priced at $24.00. But, use the coupon code “VKBC” at checkout and the price drops to just $21.60. That’s even less than if you would buy it from overseas vendors! If you’re in the market for a new battery charger… do yourself a favor and check out the xtar VC2 Plus. First off, it features a countdown timer for each bay showing the time it needs to fully charge. It can also recognize, charge, and display both Ni-MH and Li-ion batteries at the same time and you can totally control the charging speed (0.5A/1.0A) as you like. In order to save time, the USB Output with Power-Path Management System enables you to charge both batteries and the external device at the same time while power is connected! Needless to say… it’s a pretty SEKSI charger at a more than decent price point.
Use Coupon Code: VKBC
XTAR VC2 Plus Master Charger
Probably not the best deal, and only 2 bays, but hey, been a long day. Getting ready for 2 big shows so making product from dawn til dusk, and then some. My hands are tired...
The brand new Xtar VC2 Plus Battery Charger has just made its way over to the shelves at VaporKings. They have it priced at $24.00. But, use the coupon code “VKBC” at checkout and the price drops to just $21.60. That’s even less than if you would buy it from overseas vendors! If you’re in the market for a new battery charger… do yourself a favor and check out the xtar VC2 Plus. First off, it features a countdown timer for each bay showing the time it needs to fully charge. It can also recognize, charge, and display both Ni-MH and Li-ion batteries at the same time and you can totally control the charging speed (0.5A/1.0A) as you like. In order to save time, the USB Output with Power-Path Management System enables you to charge both batteries and the external device at the same time while power is connected! Needless to say… it’s a pretty SEKSI charger at a more than decent price point.
Use Coupon Code: VKBC
XTAR VC2 Plus Master Charger
Probably not the best deal, and only 2 bays, but hey, been a long day. Getting ready for 2 big shows so making product from dawn til dusk, and then some. My hands are tired...
Yes it would have to be a used top of the line brand like Asus, Sager... and would be what they call a desktop replacement. I remember finding some screws close to an inch long and it seemed like maybe 2mm hard to be sure, it was a Sager laptop I repaired that had popped a capacitor. Not worth the effort unless a guy is facing 2-4 wk wait for screws from Japan or China, lol.
Only downside to cutting stainless is when it gets real hot it may rust where it was cut later on Maybe not a problem in the hole, and especially if the screw is used once a month or so. I have cut stainless beer kegs in water with a pneumatic grinder and cutting discs and had pretty good luck.
Only downside to cutting stainless is when it gets real hot it may rust where it was cut later on Maybe not a problem in the hole, and especially if the screw is used once a month or so. I have cut stainless beer kegs in water with a pneumatic grinder and cutting discs and had pretty good luck.
Guess I was too subtle... response not fer this thread.
To get back into vaping, am having my first issue with a Naughty I've been using 'forever'; leaking. Will resolve later...
Cathy, great catch!
If you guys are into some really technical stuff go to this thread and read about the latest and greatest wires available.TC beyond Ni200: Nickel Purity, Dicodes; Ti, SS, Resistherm NiFe30; Coefficient of Resistance | Page 93 | E-Cigarette Forum
Authentic Joyetech eVic VTC Mini 60W TC VW Variable Wattage APV Box Mod. Can get this mod for $38.50 from fasttech.com with code MAP Regular price $69.90.
These are a couple of sales I found out about today. Hope it was ok to post them.
These are a couple of sales I found out about today. Hope it was ok to post them.
Charlston
Huge discounts on closeout ECIG supplies.
$20 for a $60 mod is not a bad price... I got my first one at $45 from slow tech, but now I have 3 more at $20 each, so I'm thinking it's a good deal.
Nice deal, thank you. I'm going with the four bay one. Don't four all the time, but it is handy to have when you need it, like when you get lazy about charging up the first two.
Kidding. Read a long thread about wire composition and degradation once, didn't retain an iota of it and have just stuck with kanthal. Kudos to you guys branching out.
The Xtar VP chargers are more expensive than the Xtar VC chargers. You linked to the Xtar VP4 when you posted about it a couple days ago so I thought you wanted that one specifically.Nice deal, thank you. I'm going with the four bay one. Don't four all the time, but it is handy to have when you need it, like when you get lazy about charging up the first two.
Ya know how dried beans will take a shorter time to cook if you soak them first? I read one page of that vaping wire thread and I'm waiting to see if any of it soaks into the old bean.
Last edited:
OOO cool! I ordered a Segelei Zmax V3 for $9.99. I have one; it was my first VV/VW device. Yes, it has it's limits, but it works fine for me. I never {never say never) vape over 10 watts, don't low ohm, so it will be great to add to the vapopolyse box. Such a deal!!!!
Thanks Ken! Wow, you folks have helped me spend about $20 in 2 days
OOO cool! I ordered a Segelei Zmax V3 for $9.99. I have one; it was my first VV/VW device. Yes, it has it's limits, but it works fine for me. I never {never say never) vape over 10 watts, don't low ohm, so it will be great to add to the vapopolyse box. Such a deal!!!!
Thanks Ken! Wow, you folks have helped me spend about $20 in 2 days
I cannot take credit - that goes to Deb and Gracie
Tempted by one of those myself...
The battery is replaceable but not a quick swap you have to remove 4 screws to change it.
I have an M65 and a 22mm fits it just fine. I haven't been happy with mine due to a button issue. The firing button on mine has to be pressed just right for it to fire. There was a rubber button included so I took it apart and replaced the button. Still has the same problem. It is sitting at the back of my shelf to be passed on someday.
Ok, thank you Deb and Gracie! Guess I was trying to resist the first time I looked but finally caved..
Exactly!! hehehe Ya don't freeze yur whatsis off here most of the time. Oh well, was worth a try. I lived up north a long time, but never did like it. Totally couldn't handle the cold now. When it gets to 70, I'm grabbin a jacket lol
Thanks hun, that is a great deal. I have my eye on this one
Xtar VP4
It'll be quite awhile before I get one, but I do like it better than the VC4 and I definitely want a four holer.
was gonna say....
but ya had to go and find proof huh!! hehehe
Busted. You are correct, Sir, I want the Xtar VP4. Really liked the first one and love knowing how much longer until they are fully charged.
I need to be rich. Summer up north, winter down south.
- Status
Similar threads
