Post pictures of your working wick and coil setup

[bender817]

I have tried diamond coils... Its ok. I'm sure it could have been executed better on my part, but I keep returning to tricro coils. I have been doing 18 gauge for the nano's on top, and the micro in the middle at 1/16" id. Its pretty legit when the id's are so much closer than the original idea. I use 28 gauge and usually get close to 1.6 ohms. I really like it. Even slapped one on my RSST for giggles.

 

[twistedchild316]

22 gauge @ 0.5ohm on my Igo-w

 

[the4thpower3]

That's some big coil Twisted.
What's the ID?
I haven't tried anything lower than 26awg.
Seems like ramp up and cool down time might be long. No?

 

[thlinks]

22 gauge @ 0.5ohm on my Igo-w

What camera are you using

Sent from my SM-N900P using Tapatalk

 

[bender817]

I'm so stoked. I'm about to go pick up a Chaifun GT. When I get it built, I will post it.

 

[twistedchild316]

That's some big coil Twisted.
What's the ID?
I haven't tried anything lower than 26awg.
Seems like ramp up and cool down time might be long. No?

3/32 ....and not so bad....only about 2 seconds to heat up!

What camera are you using

Sent from my SM-N900P using Tapatalk

Galaxy Note 3

 

[neonscreamer]

Dual 30g kanthal, 1.4mm ID, 7 wraps (8 counting the halves at the legs), 0.65 ohms.

The coils to the rear in the photo are a little far apart, but it's doing great so far.

Sent through osmosis

 

[Vamoman]

my 1st coil on my reomizer2

Sent from my GT-I9500 using Tapatalk HD

 

[Tbev]

Looks good, I think you might want to tilt it a bit and get that wick closer to the hole but I'm not a reo guy someone who is will tell ya.

Sent from my Transformer TF101 using Tapatalk

 

[Jjshbetz11]

my 1st coil on my reomizer2

Sent from my GT-I9500 using Tapatalk HD

Nailed it out the box, nice coil and job

 

[Jjshbetz11]

What is that .28? Would imagine it came out to 1.3 ish? Looks fantastic!

 

[fjgotgame24]

Quad nano dragon on my Igo-W with 10 wraps each using 28g kanthal. Not sure what the ohms are, Im guessing around .4. Its not particularly amazing imo, but it took me a while so I guess I'll keep it till I get bored. Mehh I guess the vape is fairly dense with 2 x 2mm airholes, and TH is kind of strong.

 

[zipflint]

2nd photo looks like a nightmarish kanthal spider!!!! Iiiiieeeee!!!!

 

[inanitydefined]

I have no clue what the ohms are, Im guessing around .4.
View attachment 300669View attachment 300670View attachment 300671

Please get an ohm meter and check. When you blow yourself up you'll give us all a bad name. Subohming is dangerous and not to be taken on with such a devil-may-care attitude

 

[BabyCrusher]

Quads get soooo hot. Read dem ohms #yolo #runawayvaptrain

Sent from my SPH-L710 using Tapatalk

 

[JayTater]

24 gauge, .5ohm on my modified Reo/RM2

 

[snow blind]

Please get an ohm meter and check. When you blow yourself up you'll give us all a bad name. Subohming is dangerous and not to be taken on with such a devil-may-care attitude

One word for this....

Darwin

 

[fjgotgame24]

Quads get soooo hot. Read dem ohms #yolo #runawayvaptrain

Sent from my SPH-L710 using Tapatalk

It doesn't get that hot on my brass nemesis, a little warm but not hot even while chain vaping. If that were on my SS nemesis, gets crazy hot... I guess brass handles it that much better. I don't own an ohm meter but Ill go check it at the shop. I don't understand what's the big deal though , when I go to the shop and find out my ohms, wether it is. 1 or. 8 I'm still safe because of my battery + mod no?
Edit: I plan on getting an ohm meter btw

 

[Newfdog]

1/16id 5/4 wrap 28g
.8ohm
Gp Spheroid

 

[inanitydefined]

One word for this....

Darwin

I'd be all for letting natural selection take its course, but vapers are in a bad spot wiith the lawmakers and the bad press of "ecig blows dudes face off" is not something we need right now