- Status
I find it pretty pleasant and the flavor is awesome. It heats up fast for me. I can not take a normal long pull off this thing. Plenty of vapor and it still is sizzling a couple seconds after I let to of the fire button. vaping at 12 watts on a vamo.
Say, UKP, can you describe what "element" of flavor is missing for you? All of it? High end, treble notes? Middle? Bass?
I have to say it is awesome, the best genny setup I'v done so far. I set my RSST up with .094" 7x19 strand ss rope with the center bundle of wires removed and 500 mesh on top. I used 2 of the individual center wires to make a twisted coil, Yes a stainless steel wire coil not kanthal. I did a 4-5 wrap coil and it metered out to .7 ohms and WOW just WOW this thing is awesome. Just check out the vapor shot I took the vape is so thick and heavy is starts to fall instantly 
)
View attachment 224996View attachment 224997View attachment 224998
)View attachment 224996View attachment 224997View attachment 224998
Paul, I use only the stock airhole, but I bore it to 1/16" (1.6mm). My attys are slightly different, in that juice is squozen in thru the bottom on demand. This means a short wick and less chance to drown / overcooling the setup like standard dripping from above.
I have found that more wraps = better vape, around 1/16" bore and 10wraps of 30 ga Kanthal really shine for me on a mech. On my VV, I run about 12 wraps
I remember the first time I ever had a REAL vape. What I mean is, the first time my setup actually produced enough vapor that it felt like it was pushing it into my mouth. It was a VAMO with a vivi nova on it. I think I had it set to 12 watts. Two toots later, I fried the coil. Anyway, this one here is producing enough steam pressure to blow my cheeks out like "The Amazing Satchmo"!
26g Kanthal in a true 1/16" micro coil w/ sterile cotton batting @ 0.8Ω. (looks fat; but that's cause the wire's so thick) If any of y'all have tried a proper micro coil, you know that its a multiplier.
Makes me wish I did cloud pics. Then again, you can probably see it from your house.
26g Kanthal in a true 1/16" micro coil w/ sterile cotton batting @ 0.8Ω. (looks fat; but that's cause the wire's so thick) If any of y'all have tried a proper micro coil, you know that its a multiplier.
Makes me wish I did cloud pics. Then again, you can probably see it from your house.
I remember the first time I ever had a REAL vape. What I mean is, the first time my setup actually produced enough vapor that it felt like it was pushing it into my mouth. It was a VAMO with a vivi nova on it. I think I had it set to 12 watts. Two toots later, I fried the coil. Anyway, this one here is producing enough steam pressure to blow my cheeks out like "The Amazing Satchmo"!
26g Kanthal in a true 1/16" micro coil w/ sterile cotton batting @ 0.8Ω. (looks fat; but that's cause the wire's so thick) If any of y'all have tried a proper micro coil, you know that its a multiplier.
Makes me wish I did cloud pics. Then again, you can probably see it from your house.
I thought about trying 26 gauge just haven't gotten it ordered yet. That is a nice coil and yes, a hit off a proper micro coil is like getting hit in the lungs by a young Mike Tyson.
Yeah, I had a hard time finding wicking material that would keep up. I found that the skinny Nextel (xc-132) could do it. Then I switched to gooseboxin'. The sterile cotton (balls or batting) works great for this. The nextel, I think, is best for anything where active wicking is required (drippers and such); but, with squonking, its like a squeeze is saying, "here, hold this", and the cotton (although not a better wicker) is a better "holder". I'm not even sure if the nextel can do 26g. Bottom Feeding, I mean. (It does great with 28) Haven't tried it yet. But I can get more vape from a single squeeze on sterile cotton than on NEXskinnyTEL.
Last edited:
I tried silica strands and ecowool before cotton. I couldn't chain vape without getting dry hits after 3-4 pulls. After I put cotton in, I chain vape with no problems at 12watts on a vamo. If I get a dry hit, it is because I have no more juice let in my dripper and the wick is bone dry. Believe me, you know when you get a dry hit with cotton!
26 gauge scares me. I'm a fan of vaping on the can (old smoker habit). 28 gauge micro coils with low resistance (sanely low, not Pdib's .2 ohm) fog it up so much I can't see. I think with 26 gauge I'd drown.
Oh, Commie . . . . . . . . . . pshaw!
I am not exactly sure pdib but would describe it as lacking in depth and as though there is more hidden away that I am not releasing.
I will try and track down some 28swg or maybe even experiment with some 26swg.
I remember the first time I ever had a REAL vape. What I mean is, the first time my setup actually produced enough vapor that it felt like it was pushing it into my mouth. It was a VAMO with a vivi nova on it. I think I had it set to 12 watts. Two toots later, I fried the coil. Anyway, this one here is producing enough steam pressure to blow my cheeks out like "The Amazing Satchmo"!
26g Kanthal in a true 1/16" micro coil w/ sterile cotton batting @ 0.8Ω. (looks fat; but that's cause the wire's so thick) If any of y'all have tried a proper micro coil, you know that its a multiplier.
Makes me wish I did cloud pics. Then again, you can probably see it from your house.
Magnificent
Paul, I use only the stock airhole, but I bore it to 1/16" (1.6mm). My attys are slightly different, in that juice is squozen in thru the bottom on demand. This means a short wick and less chance to drown / overcooling the setup like standard dripping from above.
I have found that more wraps = better vape, around 1/16" bore and 10wraps of 30 ga Kanthal really shine for me on a mech. On my VV, I run about 12 wraps
Thanks x.
I will venture into the world of multiple air holes perhaps this weekend along with pdibs thick wire low ohm coils and post some reports.
holy cow Pdib.... i was wondering what you were up to. beauty. and i didn't think there was much more i could do with my reomizer.2... than the .7 w/28g eko wool.
props to superX and his micro's
props to superX and his micro's
I remember the first time I ever had a REAL vape. What I mean is, the first time my setup actually produced enough vapor that it felt like it was pushing it into my mouth. It was a VAMO with a vivi nova on it. I think I had it set to 12 watts. Two toots later, I fried the coil. Anyway, this one here is producing enough steam pressure to blow my cheeks out like "The Amazing Satchmo"!
26g Kanthal in a true 1/16" micro coil w/ sterile cotton batting @ 0.8Ω. (looks fat; but that's cause the wire's so thick) If any of y'all have tried a proper micro coil, you know that its a multiplier.
Makes me wish I did cloud pics. Then again, you can probably see it from your house.
Last edited:
- Status
Similar threads
