- Status
It's not, but you don't see anyone posting everyone else's builds from instagram dude, everyone is posting their own. That's the point of this thread. So post yours not anyone else's.
Stacked ribbon dimensions are different than round wire. Like if you're stacking 8x.4 it's as if you're fusing 2x26g at .405mm each. About 5' gets around 4 to hopefully 5 wraps on a 3mm
And as for my working wire set up in my Kennedy25:
Missed a few staggers but I don't care, I'm just glad the stainless colored nicely.
Sent from my XT1585 using Tapatalk
You gotta love that stuff for its colour!
They missed wraps are only adding to the flavour! less wraps the better on the staples if you ask me plus you can turn the power down a little
Mine
Quad parallel 32ga
To heck with Clapton wire, I claptoned the wick
One puff at 70W
Quad parallel 32ga
To heck with Clapton wire, I claptoned the wick
One puff at 70W
Finished this concept today. For the lack of better name I'm calling it either Alien 3 or the Trinity Coil lol
So, sigh, gonna be a long post lol, sorry ahead for that guys but this is a mouthful, both specs wise and flavor smd vapor wise lol
So, to the point, this a 3x26/30-36 stitched alien parallel with 1x26/30 vertical hollow decored alien, double helixed with 30.
I originally wanted to base this all around 36 but it's virtually impossible to decore 28/36 alien. After several days battling this, and after a lot of alien wire wasted, many pokes, cuts, many many wire breaks, aggravation, patience used, and everything else that comes with inventing new coil concepts, I finally accepted my defeat and settle on the only wires that wouldn't break when pulled apart, 30 gauge. The most I was able to get with 36 was 2 inches of decored aliens. I learned a lot and that's important as we're all always learning.
The coil is massive. It took a ton, and I mean a TON of adjusting, had to completely take out one of the posts on my 24 goon cause the helix wires were playing goofy with me. Finally got it where I wanted it. It barely clears the deck. Vapes great. Flavor is solid. And different. Great but brings out different notes in flavor. Vapor is insanely dense. I won't post a selfie cause no one will even see me lol
Here's some pics.
Prior to double helixing and prior to mounting.
One of my buddies asked me if these are Mohawks, I'm like nope, hollow aliens, he's like "dope as f... K" lololol
The stitches are really showing in this shot. Flew through the stitched alien part, came out with enough wire for 2 coils, didn't even need that much but whatevs lol
After more adjusting I finally got it perfect.
Glow shot of an absolute beast of this coil
So, sigh, gonna be a long post lol, sorry ahead for that guys but this is a mouthful, both specs wise and flavor smd vapor wise lol
So, to the point, this a 3x26/30-36 stitched alien parallel with 1x26/30 vertical hollow decored alien, double helixed with 30.
I originally wanted to base this all around 36 but it's virtually impossible to decore 28/36 alien. After several days battling this, and after a lot of alien wire wasted, many pokes, cuts, many many wire breaks, aggravation, patience used, and everything else that comes with inventing new coil concepts, I finally accepted my defeat and settle on the only wires that wouldn't break when pulled apart, 30 gauge. The most I was able to get with 36 was 2 inches of decored aliens. I learned a lot and that's important as we're all always learning.
The coil is massive. It took a ton, and I mean a TON of adjusting, had to completely take out one of the posts on my 24 goon cause the helix wires were playing goofy with me. Finally got it where I wanted it. It barely clears the deck. Vapes great. Flavor is solid. And different. Great but brings out different notes in flavor. Vapor is insanely dense. I won't post a selfie cause no one will even see me lol
Here's some pics.
Prior to double helixing and prior to mounting.
One of my buddies asked me if these are Mohawks, I'm like nope, hollow aliens, he's like "dope as f... K" lololol
The stitches are really showing in this shot. Flew through the stitched alien part, came out with enough wire for 2 coils, didn't even need that much but whatevs lol
After more adjusting I finally got it perfect.
Glow shot of an absolute beast of this coil
Last edited:
Shiny and all but where's the wick?Finished this concept today. For the lack of better name I'm calling it either Alien 3 or the Trinity Coil lol
So, sigh, gonna be a long post lol, sorry ahead for that guys but this is a mouthful, both specs wise and flavor smd vapor wise lol
So, to the point, this a 3x26/30-36 stitched alien parallel with 1x26/30 vertical hollow decored alien, double helixed with 30.
I originally wanted to base this all around 36 but it's virtually impossible to decore 28/36 alien. After several days battling this, and after a lot of alien wire wasted, many pokes, cuts, many many wire breaks, aggravation, patience used, and everything else that comes with inventing new coil concepts, I finally accepted my defeat and settle on the only wires that wouldn't break when pulled apart, 30 gauge. The most I was able to get with 36 was 2 inches of decored aliens. I learned a lot and that's important as we're all always learning.
The coil is massive. It took a ton, and I mean a TON of adjusting, had to completely take out one of the posts on my 24 goon cause the helix wires were playing goofy with me. Finally got it where I wanted it. It barely clears the deck. Vapes great. Flavor is solid. And different. Great but brings out different notes in flavor. Vapor is insanely dense. I won't post a selfie cause no one will even see me lol
Here's some pics.
Prior to double helixing and prior to mounting.
One of my buddies asked me if these are Mohawks, I'm like nope, hollow aliens, he's like "dope as f... K" lololol
The stitches are really showing in this shot. Flew through the stitched alien part, came out with enough wire for 2 coils, didn't even need that much but whatevs lol
After more adjusting I finally got it perfect.
Glow shot of an absolute beast of this coil
"Your working wick and coil setup"
Not mine lolololShiny and all but where's the wick?
"Your working wick and coil setup"
And a "working" selfie lol
Barely fits
I cranked the Watts up to 90, vape is hot and extremely flavorful. Absolutely amazing
I cranked the Watts up to 90, vape is hot and extremely flavorful. Absolutely amazing
No doubt it's a hot vape with those air cooled heating fins sticking out.Barely fits
I cranked the Watts up to 90, vape is hot and extremely flavorful. Absolutely amazing
I'm gonna build something new today lol
I guess I'm becoming one of those guys that can't keep an awesome coil in their mod longer than a few days. Either that or I just really like building
I guess I'm becoming one of those guys that can't keep an awesome coil in their mod longer than a few days. Either that or I just really like building
- Status
Similar threads
