Post pictures of your working wick and coil setup

[Tom Forde]

You can send them my way if you would like! In fact, I'll take any old builds you don't need lol. I just wrecked my car 3 days ago and my vaping money went on vacation. Trying to salvage as much as I can Nice build though partner!

Would they fit inside your atty's post holes and not touch the sidewall? They're huge coils, they'd probably fit best in a twisted messes atty.

 

[vapero]

first clapton (used ud claptons)

 

[jj6404]

Would they fit inside your atty's post holes and not touch the sidewall? They're huge coils, they'd probably fit best in a twisted messes atty.

Or velocity or 13 heavens 9 hells right?


Sent from my iPhone using Tapatalk

 

[Tom Forde]

Or velocity or 13 heavens 9 hells right?


Sent from my iPhone using Tapatalk

Considering a 13 heavens 9 hells is a rebranded TM Atty, obviously, and yeah, almost anything will fit in a velocity, but I'm not sure the post holes are big enough for these coils.

first clapton (used ud claptons)

UD pre-made Claptons?! Cheating all the way. It's the Tom Brady of coil building! I'm just playin, looks good, nice and centered

 

[jj6404]

Considering a 13 heavens 9 hells is a rebranded TM Atty, obviously, and yeah, almost anything will fit in a velocity, but I'm not sure the post holes are big enough for these coils.


UD pre-made Claptons?! Cheating all the way. It's the Tom Brady of coil building! I'm just playin, looks good, nice and centered

Well I'm sayin', the post holes of the 13H9H are bigger than the TM and Velocity, so it may be the best chance of fitting those monsters.


Sent from my iPhone using Tapatalk

 

[Tmb821]

26g paralleled with twisted 32g.

 

[Housetek]

rockin this all day

 

[Tom Forde]

Well I'm sayin', the post holes of the 13H9H are bigger than the TM and Velocity, so it may be the best chance of fitting those monsters.


Sent from my iPhone using Tapatalk

That sounds impossible lol. That's pretty ridiculous, a standard 26g build must look odd going into such big holes
Edit: not to mention something like a 30g Ni200 TC build. That's like sliding a hotdog down a hallway...

 

[SLIPPY_EEL]

rockin this all day

Nice build

Gonna have to try it ...

 

[Tom Forde]

rockin this all day

Fused 28g Claptons? Ohms must be super low

 

[Tom Forde]

New Petri build: fused 26g N80 with a 34g arched Clapton. Pretty hard not to break the wrap when arching it, so I only flattened them with toothless pliers and no hammering the coils. Dual 7 wraps on a 2.5mm bit = .15 on the dot.

 

[Housetek]

Fused 28g Claptons? Ohms must be super low

Fused Claptons 26g a1/36g a1 coming out at .15 OHms quad coil with 6 wraps around 3mm

 

[jj6404]

That sounds impossible lol. That's pretty ridiculous, a standard 26g build must look odd going into such big holes
Edit: not to mention something like a 30g Ni200 TC build. That's like sliding a hotdog down a hallway...

Yup lol. The TM atty has something like 2.8mm post holes while the 13H9H has 3mm holes.


Sent from my iPhone using Tapatalk

 

[SLIPPY_EEL]

New Petri build: fused 26g N80 with a 34g arched Clapton. Pretty hard not to break the wrap when arching it, so I only flattened them with toothless pliers and no hammering the coils. Dual 7 wraps on a 2.5mm bit = .15 on the dot. View attachment 480489View attachment 480490

Nice Tom, is the Vape the same as the Alien? Not taking anything away from your work but if it is then it could be the cheap mans version of the Alien

i'm finding it so hard lately to spend time making coils it sucksssss lol

 

[EU6EN3]

Fused Claptons 26g a1/36g a1 coming out at .15 OHms quad coil with 6 wraps around 3mm

Hey bro.. at such low ohms.. how you prevent dry hits? Or how many vapes before you start dripping again? I always get burnt taste pretty fast even if i just change my cotton not long. I am not getting those nice dry cotton before i start dripping again. When i get the burnt taste and i looked at my dripper, the cotton is still wet and the juice just seem not getting into the coil..

 

[SLIPPY_EEL]

ok here she is, she's a little rough but vapes good at 0.8ohms

 

[G-weezy]

 

[Tom Forde]

Nice Tom, is the Vape the same as the Alien? Not taking anything away from your work but if it is then it could be the cheap mans version of the Alien

i'm finding it so hard lately to spend time making coils it sucksssss lol

It's in between a fused Clapton and and an alien for me. I used 20g to make the initial 34g Clapton and then I slid 2x26g through it after I crimped it down to arch it. So the ohms would be more along the lines of a regular fused Clapton and not super low like a 26g alien clapton. It's a great coil, I'd suggest doing it in 32 or 30g first with 3x28g or 4x30g inside as the core wires.

 

[SLIPPY_EEL]

It's in between a fused Clapton and and an alien for me. I used 20g to make the initial 34g Clapton and then I slid 2x26g through it after I crimped it down to arch it. So the ohms would be more along the lines of a regular fused Clapton and not super low like a 26g alien clapton. It's a great coil, I'd suggest doing it in 32 or 30g first with 3x28g or 4x30g inside as the core wires.

yeah 4 strands inside, good idea. or slide a bunch of ribbon inside...


btw the last build i posted was 0.08ohms, she drinks the juice and drains the batteries even quicker hahahaa i think i might have to turn my back on her ^_^

Hey G nice build, good choice on atty mate, are you liking it?

 

[Retro138]

24 gauge rugged wire/ weapon x dual 10 wrap ohm'd out at .21