- Status
I went SS on Copper. I already have a K24 in SS on my copper Roundhouse 24mm and it looks great. So I figured it'd be way less work to maintain and I don't have to worry about green cotton so much
Sent from my XT1585 using Tapatalk
Here's a bit of wire I put together earlier, 28g Kanthal, spaced 34g n80 then all wrapped together with 34g 316sss
will make a coil with it later, just need to see which atty's it will fit
EDIT: just offered the wire up to the post holes on the Limitless Plus and looks like they will fit, will be snug But should be good, just need to work out wether to go 2.5 or 3mm id..
EDIT: just offered the wire up to the post holes on the Limitless Plus and looks like they will fit, will be snug But should be good, just need to work out wether to go 2.5 or 3mm id..
Last edited:
Damn it slip I was literally gonna build this today lol
Great minds think alike
What did this read at?
Great minds think alike
What did this read at?
Last edited:
Damn slip I was literally gonna build this today lol
Great minds think alike
What did this read at?
I think it was 0.17 ohms, will double check once I get the monkeys to sleep and I can get back downstairs to have a proper vape on it. You like to stay above .2ohms? I wrapped it on a 3mm as well!
No I like to stay above .1
That also depends what I'm building on. Avocado builds I want higher, .2 and up because I dont want the tank cracking from heat. Goon I could care less. My rx won't fire below .1 so yeah. .12-.15 range for goon
It's 0.18 ohms.
Have you heard of anyone cracking the glass from any build? I don't think you will, ive gone to a 0.07ohms dual and not cracked the glass plus the fact your juice is in around the glass to keep it cool.
I know that bro, but I'm just keeping it safe (glass wise) that's all. I love that frosted tank even though I switched it to regular glass about a month ago just cause I wanted something different for a changeIt's 0.18 ohms.
Have you heard of anyone cracking the glass from any build? I don't think you will, ive gone to a 0.07ohms dual and not cracked the glass plus the fact your juice is in around the glass to keep it cool.
.
I know! your too much in love with your RDTA to take advantage of her
EDIT: I'd be a broken man if anything happened to mine. Justadude i bet you have your Zoom goggles on right now and your going at it with your staggered claptons arent ya? hehee 40g on 38 would be impressive to see
I know! your too much in love with your RDTA to take advantage of her
EDIT: I'd be a broken man if anything happened to mine. Justadude i bet you have your Zoom goggles on right now and your going at it with your staggered claptons arent ya?
hehee 40g on 38 would be impressive to see
Last edited:
No I took a break, we went to get some noms.
I know! your too much in love with your RDTA to take advantage of her
EDIT: I'd be a broken man if anything happened to mine. Justadude i bet you have your Zoom goggles on right now and your going at it with your staggered claptons arent ya?
Then went for a night walk
And now that I'm finally back home and it's 2am, the girl went to sleep and I just stacked double corrugated core, walls, parabolic, walls, and staggered frames that I started working on before we left
Gonna have a beer and stagger staple it.
I'll do what you did but with higher gauges and and my own twist on the entire build. I've seen twisted messes do that a while back and this was on my list to try anyway. I've just been busy with other builds I wanted to do first. But this is coming soon for sure.
As for impressing you guys I could do a 44 on 40 if you want. That's not the point though. You know i got stags down pretty well but I got bigger fish to fry in the near future. While I was out I got an absolutely sick idea that hasn't been done before. But I need few hours to work on it and tomorrow won't happen cause we're going to visit my folks and then my buddy so I'll be out all damn day. Sigh
Last edited:
Nice dude! And i hope you weren't eating EEL's lol ... i did a lot of swimming, running and cycling as a kid, always had physical job's and was weight training upto maybe 5yrs ago, i'm hoping to get back into it when we move, i so miss being able to eat everything and anything without it going on the six pack
Lets see some wide, high gauge multi core fused staggers if your upto it
I have a couple of ideas for another build
Lets see some wide, high gauge multi core fused staggers if your upto it
I have a couple of ideas for another build
Last edited:
Not last night but eel role is one of my favorites lolololNice dude! And i hope you weren't eating EEL's lol ... i did a lot of swimming, running and cycling as a kid, always had physical job's and was weight training upto maybe 5yrs ago, i'm hoping to get back into it when we move, i so miss being able to eat everything and anything without it going on the six pack
Lets see some wide, high gauge multi core fused staggers if your upto it
I have a couple of ideas for another build
I'll bring some tools and wire to my homies house today when we go visit him. I'll try to pull this off while he's barbecuing lol
We got back last night kind of late, by the time we were done with bunny chores and done with intimate chores lol it was 2am.You ate a bad eel?
Btw i shot you a Pm about a wire
I started building on the patio at my buddy's house but had limited lighting cause it was getting dark. I checked the stags when I got home and while most of them were on point some would drift. That's what I get for doing it on a deck outside lol
So I'm redoing it now since I'm comfortably back at home. I couldn't be bothered to do it at 2am last night after a massive orgasm lol I was so tired. I've been literally going to bed between 4-5am every night this week and getting up somewhat early. I needed my rest finally. Now gonna build and post it in a little while.
Yesterday wasn't completely unproductive. While at my folks house me and my dad build a little stand so my drill can stand super horizontal and another little piece to mount my swivels so I don't have to do it all flat on a table. Save my back this way by being higher off the table. My girl took this picture. I'm staggering 30/40
Life is now easier
Life is now easier
- Status
Similar threads
