Project Platinum Revival Beta Testing

[Iken]

Nice! I'm stoked. Would you mind posting to this thread when they're going live on the website? I'd like to snag a few boxes before they sell out.

Right on! That's a promise!

Just wanted to look at that again.

Aww shucks sweetheart! Thank ya! Tried to make it as simple as possible while giving it some a smooth blend.
Here's the finished boxing as of this morning.

Production starts tonight!

Yay, no flange.
What will the holes be on prepunched?

Dual ports set at 3mm diameter good sir. Which will be perfect.
Previously with other 3mm ports interacting with batting. It was like a SoC 801 processor running on a 2k display. Just not enough to be fully optimized and make use of the potential. This batting with the coil can definitely take it while adding beautiful absorbency for optimum wicking and delivery.

 

[Anarchy84]

Right on! That's a promise!

Aww shucks sweetheart! Thank ya! Tried to make it as simple as possible while giving it some a smooth blend.
Here's the finished boxing as of this morning.

Production starts tonight!

Dual ports set at 3mm diameter good sir. Which will be perfect.
Previously with other 3mm ports interacting with batting. It was like a SoC 801 processor running on a 2k display. Just not enough to be fully optimized and make use of the potential. This batting with the coil can definitely take it while adding beautiful absorbency for optimum wicking and delivery.

Beyond excited for these! Just ordered another dozen Nitro 2.5 ohm Punch, too. Loving your products, Isaac. Keep up the good work!

 

[Train2]

Hmmmmmmmmm!!!!
This sounds like my kinda carto.
Big fat holes and no flange.
Woo-hoo!

Dual ports set at 3mm diameter good sir. Which will be perfect.
Previously with other 3mm ports interacting with batting. It was like a SoC 801 processor running on a 2k display. Just not enough to be fully optimized and make use of the potential. This batting with the coil can definitely take it while adding beautiful absorbency for optimum wicking and delivery.

 

[Iken]

lol I just noticed the warning label is still from the factory. That's being more refined and in black text on the side.

Warning: Atomized cartridges are intended for use by persons of legal smoking age. Do not use if you are a woman who is pregnant or breast feeding or a person with or at risk of heart disease, high blood pressure, diabetes, or taking medicine for depression or asthma. Please keep cartridges away from pets and children.

 

[Switched]

lol I just noticed the warning label is still from the factory. That's being more refined and in black text on the side.

So what's up with this diabetes thing?

 

[5cardstud]

So what's up with this diabetes thing?

Probably the same warning stinkies have. I imagine it's for the FDA. You know how ......ed they are.

 

[DPLongo22]

Probably the same warning stinkies have. I imagine it's for the FDA. You know how ......ed they are.

y'THINK? ;-)

 

[Katdarling]

Hmmmmmmmmm!!!!
This sounds like my kinda carto.
Big fat holes and no flange.
Woo-hoo!

Yep Yep YEP!!!!! Do eeet, Isaac! Get these puppies out to the masses!!

Probably the same warning stinkies have. I imagine it's for the FDA. You know how ......ed they are.

NO! I never even noticed...

 

[5cardstud]

Yep Yep YEP!!!!! Do eeet, Isaac! Get these puppies out to the masses!!




NO! I never even noticed...

And how are you me lovely?

 

[Katdarling]

I am very well, my Studmaster..... and you, dahlink?

 

[5cardstud]

I'm just cruzin. Wondering if you have any good stuff to tell us that don't live an exciting life.

 

[Anarchy84]

Been running two of the Platinum carts you sent me for 3 days now - one punched in a tank, one unpunched. Both working really well. Great vapor production and flavor. Love the batting in these.

Isaac, you mentioned that the Platinum prepunched cartos would have dual 3mm holes. Have you had a chance to test that out yet? I've got two 1mm holes in my tanked carto with 100% VG juice and it's working great. Worried that two 3mm holes might allow too much juice in. I've used cartos with one 3mm hole before, but never with two. Should be interesting.

 

[Iken]

So what's up with this diabetes thing?

Hey now, you never know haha. Just a standardized warning. J5 hit it pretty good. I just noticed your thread over there. I want to know how Switcher's doing!

Been running two of the Platinum carts you sent me for 3 days now - one punched in a tank, one unpunched. Both working really well. Great vapor production and flavor. Love the batting in these.

Isaac, you mentioned that the Platinum prepunched cartos would have dual 3mm holes. Have you had a chance to test that out yet? I've got two 1mm holes in my tanked carto with 100% VG juice and it's working great. Worried that two 3mm holes might allow too much juice in. I've used cartos with one 3mm hole before, but never with two. Should be interesting.

Ah interesting. I did bore out a few of them to 1 and 3mm. I had success with both of them without flooding, but I didn't test it on VG spectrum. I just can't use the stuff like you guys. Hows it going? Did you try to bore one out to 3mm?

 

[Anarchy84]

Ah interesting. I did bore out a few of them to 1 and 3mm. I had success with both of them without flooding, but I didn't test it on VG spectrum. I just can't use the stuff like you guys. Hows it going? Did you try to bore one out to 3mm?

Still going strong on the tanked carto with (2) 1mm holes. Haven't had a drop in vapor / flavor at all yet.

I haven't tried boring out a 3mm hole at all. The punch I have works well for making 1mm holes, but if I try to go bigger it typically bends the carto and makes it difficult to insert it back into the tank.

 

[5cardstud]

I remeber a member saying (when tanked fusions first hit the vaping world) that he had very large holes and small ones he tried in a Fusion and he said it didn't make any difference. For what that's worth.

 

[Iken]

Ok! These came in last night. Well part of the order at least.
All the Dual 3mm ported are on board. I have been using a few for testing and my god. These are certainly the new Flagship in our cartos.
We're having trouble locating the other cases of the unpunched models however. DHL is really dropping the ball big time but are working diligently to locate and recover the other half. We should hear something today or tomorrow being the latest.

 

[Anarchy84]

Ok! These came in last night. Well part of the order at least.
All the Dual 3mm ported are on board. I have been using a few for testing and my god. These are certainly the new Flagship in our cartos.
We're having trouble locating the other cases of the unpunched models however. DHL is really dropping the ball big time but are working diligently to locate and recover the other half. We should hear something today or tomorrow being the latest.

Great news! Any idea when we'll be able to purchase some?

 

[Bovinia]

Woohoo!! DHL better get busy on the lost ones tho!

 

[Iken]

Right on! They tracked the 2nd half of the shipment and it should be here today or tomorrow then we can get the updating. You guys are going to Love these.

 

[5cardstud]

Oh I guess I should have read the other posts. As soon as I got to there and you're going to love these I checked every platinum on site and got Item out of stock.