RTAs for a restricted lung hit

Status
Not open for further replies.

benley73

Ultra Member
ECF Veteran
May 2, 2016
1,382
2,219
52
Nice, but another 2-ml tank? Grrr... I hate TPD. :facepalm:
2ml TDP is UK , sadly but most in UK order from outside , they be screwed if brexit happens ,
It means they would actually have to have customs and checks lol which clear dont happen now ,
You dont even need a passport boats arriving daily
Free accommodation food clothes why wouldn't more come, hell they could even bring me some parts and Atomiser Germany wont us ,

Sent from my ONEPLUS A3003 using Tapatalk
 

benley73

Ultra Member
ECF Veteran
May 2, 2016
1,382
2,219
52
The reaper v3 RTA
is working out pretty well for me been using for a week now
I have only tried the 2.7mm airflow deck with it,
as R-DTL
not tried the MTL deck yet,
Side single airflow 2.7 2.5 are working work well for me.

I have been Using a SS 316l clapton 3mm ID, 0.47ohm running it low 17w,
I can go higher
but the Flavour is definitely good at lower pwr,
Its a keeper, [emoji6]
I dont mind bottom fill since a lot of classics are bottom fill,

One thing i have noticed
The tank refills do seem to last pretty well for me with
2ml juice size seem like the the smaller feed holes to deck,
Do help It to not guzzle the juice
It just seems a lot more conservative on juice
more than my other atties but still just enough for giving great
flavour,
Which is definitely on par with my other good ones, Dvarw 22, RTA
Cloudone v4 blasted RTA
Ect..
Has its quirks though JFC seems backwards undo tank to open ,
Tighten tank to 510 to close shut,
which is opposite to all others,
Other than that its a winner,
329aa689eea5865955c5495d07530278.jpg


Sent from my ONEPLUS A3003 using Tapatalk
 

Katya

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Feb 23, 2010
34,804
120,147
SoCal
Looks like class is already in session.

Very much so. And with added urgency--after Gottlieb's resignation. :facepalm:

So it looks (sounds) as though the only major complaint about the Hastur is that glass tube not being held in place properly. If that's fixed, we should be OK, no? BTW, I watched some videos about the mini Hastur (glass situation resolved) and it's getting good reviews. I still prefer the large one--for the airflow inserts and the 3.5 ml capacity--but I'm not sure whether to wait for v2 or just get the old one with a new top cap. Is there even going to be a v2? Probably not, since they introduced the improved mini version instead. Thoughts?
 

AngeNZ

ShutterBug
Supporting Member
ECF Veteran
  • Mar 24, 2018
    11,349
    88,252
    New Zealand
    Very much so. And with added urgency--after Gottlieb's resignation. :facepalm:

    So it looks (sounds) as though the only major complaint about the Hastur is that glass tube not being held in place properly. If that's fixed, we should be OK, no? BTW, I watched some videos about the mini Hastur (glass situation resolved) and it's getting good reviews. I still prefer the large one--for the airflow inserts and the 3.5 ml capacity--but I'm not sure whether to wait for v2 or just get the old one with a new top cap. Is there even going to be a v2? Probably not, since they introduced the improved mini version instead. Thoughts?

    You said it all ;) Main complaints were top cap too hard to remove (fixed) and glass tube too easy to remove - by the looks of it, this also has been fixed:

    hastur.jpg


    How thirsty is it though? ;)
     

    Katya

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Feb 23, 2010
    34,804
    120,147
    SoCal
    How thirsty is it though? ;)

    Good question. Shall we ask @Black wings ? :)
    The full size one is excellent but be sure to buy the extra airflow adapters to get the best from it.
    The drip tip on the mini looks odd (you do get a smaller one included) but it's actually fantastic.
    You can buy optional airflow decks for the mini for a couple of dollars. Worth doing as the single hole deck improves a great flavour to fantastic. I'm yet to try the 0.6mm airflow deck as I feel it may be a tad tight for me.
     

    Katya

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Feb 23, 2010
    34,804
    120,147
    SoCal
    Obviously it's ohms and airflow depending but I run both with a 1 ohm ish (+ or-) kanthal coil at 2.5mm 27awg quite tight and it's super economic. In fact I've built up about a 150mls of my manabush adv since switching to a mini.

    Thanks, Black Wing! Good to know!
     

    Janusz

    Super Member
    ECF Veteran
    Feb 22, 2018
    537
    1,737
    Illinois, USA


    I'm finding his reviews funnier and funnier :lol:

    Anyway, he loved the flavour, deck was easy to build if you know what you're doing, he took out the jfc as it was a pita :lol: and he didn't like how it was bottom fill.

    Hastur is looking the better option


    Not for me..I do not have Hastur but I have two Sirens and I think vape would be too similar...with the only difference in ability to install different inserts... but Siren fully open gives me perfect draw so I do not need more AF.

    Siren and Doggy has the same wicking method all three are GT based with open bays... so E-juice have to travel upwards quite a long route... with EVL e-juice has shorter route... building on Siren is the easiest from all other RTAs I own... on Hastur it is the same small challenge as on Doggy... flavor wise Hastur should be as good as on Siren so definitively it is worth to have it... I still enjoy my sirens and if I had to choose one or other I would choose them over doggies... easier to use and better draw... what I love about doggies is simplicity and look...

    I do not know how good EVL will be but I will know when i will get it ... it shipped yesterday so in about couple weeks I will know :)
     

    Katya

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Feb 23, 2010
    34,804
    120,147
    SoCal
    Status
    Not open for further replies.

    Users who are viewing this thread