Well... she does look rather happy. Come to think of it where is her other hand?
Yep, I have a few Project X's and they all work fine on my many Colossal's. In fact every single RDA/RTA I have work fine on them.
Yours is hosed. I would contact Asmodus and they will resolve this for you. They will likely have you send yours back and then replace it.
Asmodus support is really good so I am confident they will make this right for you.
Thanks SMT .....I feel very blessed to have such good friends here....all will be well. I'm just a bit grumpy that I'm going into the mill againCharlie my thoughts will be with you through "all this". You have a great outlook in all life's matters so I, and many others here, are confident you will pull through with flying colors. Keep up your bright positive spirit my friend.
Virtual (((<<<hugs>>>))) to you buddy!!!
Just put in a big order of flavour concentrates and PG/VG at Flavour World. Thanks to the generosity of our shiny friend @Daniel Forsyth I got $25 off. I feel very lucky! Thanks Daniel.
It's Great flavour so the only drawback for you would be that it's only 2ml, you can solve that problem by getting two of em'
I got mine from Sourcemore for $17.90 on special, it was the cheapest price I could find.
asMODus ANANI MTL Rebuildable Tank Atomizer Φ24mm 5.3mm Deep Juice
The Tripod does sound very nice
If not already posted, Brunhilde rda for $23.99 at Vaporl with code cvdbrun. I have never used vapor but it is a good deal. Looks like several color selections available.
Vapefly Brunhilde MTL RTA - 5ml
Vapefly Brunhilde MTL RTA - 5ml
Now you can mix until your hearts content, Oink
I'm More than happy to help any Shiny any time I can
I understand what you're saying and can see where a diagram like that could be off-putting. To be fair it is only the one page that shows the blow-up parts diagram for the Tripod. The rest are just simple user tips. It's not a difficult RTA to setup and use. I see no reason to completely take one apart.
I have several Kayfun's and very honestly they are not at all complicated. There have only been a couple times that I've disassembled one since my first KFL in 2013. I think with many quality RTA's it is rare to have to ever disassemble one completely. I've never had to with the Tripod, K5, K3 mini, Prime or KFL19.
Yes absolutely, the Kayfun 4 was way over engineered. Many complained about that. There are also many who love their K4's. SVM's follow-on RTA's have all had considerably less parts. That is one of the only Kayfun's I never bought and specifically because of all the parts. @Opinionated has a K4. I would guess she never stripped it down completely. I could be wrong. OP???
It is cool of Atmizoo and SvoeMesto to include parts diagrams as both companies sell all the parts. And I find that to be perfect when I look into future probable regulations. I have most of the spares one would ever need to keep them running for the rest of my days and beyond. That simply cannot be said for most of the RTA's out there as the majority of them don't sell all the spare parts.
It would be interesting to see parts diagrams of some of the more popular quality RTA's out and about. I don't think I would be too far off in stating a good portion have at least 20 parts. If they all included a parts diagram you may feel the same about those. IDK. But yeah, I get ya!
Yes, with the help of many I have it all figured out now. Of course, I will not remember it next week but for now I am good. I will be returning it to my friend and I shot him the video someone posted on how to use itOnce the Colossal is unlocked you can switch from S, N or H by swiping up or down. It works that way on all my Colossal's. Give it a go, betcha it works.
The tank was a combo deal, just for that special - previously the colossal sold as just a mod. I've got no idea what caused it - but it sounds like the 510 pin spring is no longer springy
And it was possibly a fault from day 1.Post your issue into the Asmodus forum here:
Asmodus
They will either give you a fix, or a replacement mod.
Normal use doesn't damage this mod. I spent 9 months running a bottom fill doggy RTA on it - every fill, it got unscrewed off the mod, and screwed back on. With no issues at all.
Sometimes, crap just happens
Email has been sentYep, I have a few Project X's and they all work fine on my many Colossal's. In fact every single RDA/RTA I have work fine on them.
Yours is hosed. I would contact Asmodus and they will resolve this for you. They will likely have you send yours back and then replace it.
Asmodus support is really good so I am confident they will make this right for you.
@AngeNZ
Yeah I'm pretty sure that all that's going on is it's a wonky 510. I'm fairly certain that it came that way because I do remember thinking the first time I put the atomizer on it that it didn't feel like a springy connection. But like an idiot I didn't check it. I'm definitely not going to hold it against a mod simply because of a faulty 510. I emailed the site because of how quickly they responded to my questions previously but if that doesn't pan out which I'm sure it will I will go the Forum route and explain to them what's going on. Thanks for all your help
Yeah I'm pretty sure that all that's going on is it's a wonky 510. I'm fairly certain that it came that way because I do remember thinking the first time I put the atomizer on it that it didn't feel like a springy connection. But like an idiot I didn't check it. I'm definitely not going to hold it against a mod simply because of a faulty 510. I emailed the site because of how quickly they responded to my questions previously but if that doesn't pan out which I'm sure it will I will go the Forum route and explain to them what's going on. Thanks for all your help
@ShowMeTwice Got some questions on this lil beauty:
ULTON Hussar 2.0 II Styled RDA
Is it more restricted than the v1 Hussar?, more restricted than the Project X RTA?
The airflow on the v1 hussar RDA, Project x rta NarCa & Krma rda is my perfect frankenvape draw. But that is with a 5.5mm bore id drip tip.
And it's a bit of a worry when a MTL vaper finds restricted lung RDAs too tight
ULTON Hussar 2.0 II Styled RDA
Is it more restricted than the v1 Hussar?, more restricted than the Project X RTA?
The airflow on the v1 hussar RDA, Project x rta NarCa & Krma rda is my perfect frankenvape draw. But that is with a 5.5mm bore id drip tip.
And it's a bit of a worry when a MTL vaper finds restricted lung RDAs too tight
I have both the v1 and v2 running atm. With the DT it comes with (6.5mm bore) yes the v2 is more restricted than the v1 or the X. Not by a whole lot versus the v1 but it is very noticeable to me. I love the X wide open but the v2 is not even close to that. It's on par with the SMJY 2k16 Doggy wide open but it most closely matches the Venna. Don't you have a Venna?@ShowMeTwice Got some questions on this lil beauty:
ULTON Hussar 2.0 II Styled RDA
Is it more restricted than the v1 Hussar?, more restricted than the Project X RTA?
The airflow on the v1 hussar RDA, Project x rta NarCa & Krma rda is my perfect frankenvape draw. But that is with a 5.5mm bore id drip tip.
And it's a bit of a worry when a MTL vaper finds restricted lung RDAs too tight
FWIW I have the SXK version in my cart only because I think they do a better cloning job versus Ulton. Same with YFTK and Coppervape and their clones. The SXK vsn wasn't yet available when I got mine.
Hope that helps.
Similar threads
- Locked
