Pigs

Vaping
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
isn't vinegar an acid?

getting into the mod? something i should knows abt now that i'm mods deep into squonking?
Not planning on getting it anywhere near the mod. White vinegar is a cleaning agent with a PH of around 2.5 so it is technically acidic. A great way to clean kitchen surfaces - especially SS sinks - without leaving any toxic chemical traces. I use it as my main houshold cleaner. Pretty sure Delores (or was it Mel?) mentioned they use it.

pH of Vinegar: Acidity and Strength

So I've rinsed the bottle and tube well and I'd say the plastic smell is about 70 percent less. I'll let it air for a couple more hours and fill er up!

Edit : just saw windy's post. Dead right
 
Last edited:

Pigs

Vaping
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
giphy.gif


just coz i can't eat you don't mean i won't chop you up

Hey ! You do have a yellow moustache. Knew it
 
  • Useful
Reactions: the wind

virm

Ultra Member
ECF Veteran
  • Oct 27, 2019
    1,735
    10,464
    Not planning on getting it anywhere near the mod. White vinegar is a cleaning agent with a PH of around 2.5 so it is technically acidic. A great way to clean kitchen surfaces - especially SS sinks - without leaving any toxic chemical traces. I use it as my main houshold cleaner. Pretty sure Delores (or was it Mel?) mentioned they use it.

    pH of Vinegar: Acidity and Strength

    So I've rinsed the bottle and tube well and I'd say the plastic smell is about 70 percent less. I'll let it air for a couple more hours and fill er up!

    Edit : just saw windy's post. Dead right

    NEHRD!
     

    chanelvaps

    ECF Guru
    ECF Veteran
    Verified Member
    Oct 3, 2013
    16,033
    85,315
    Burbank CAlifornia
    I’ve only owned my own home almost 7 years now. I gave up on push mowing my 1/2 acre after the first summer. I can’t get it done!
    OH push mowing..forget it, I had a rider. It was not the lawn as much as it was all the gardens, fences, weeds, keeping the brush behind the house at bay..etc.
     

    chanelvaps

    ECF Guru
    ECF Veteran
    Verified Member
    Oct 3, 2013
    16,033
    85,315
    Burbank CAlifornia
    No doubt in my mind, you can do it. Technically, I can too, it’s just been getting harder as my shoulder gets worse. And... I think we’ve earned not having to knock ourselves out. Some chores I feel very accomplished, having succeeded. But I don’t feel like slaving to this house anymore. I want to do all the stuff I was too busy working hard to get to for the last 35 years.
    YES! That is true and that is what I will remind myself if the guilt creeps in. YES!
     

    Letitia

    Citrus Junkie
    Supporting Member
    ECF Veteran
    Apr 2, 2017
    25,885
    137,062
    West Frankfort, IL
    so per SE with ID 3mm and 6 wraps while leaving the others at default Legs 5mm and wrap spacing 0.05 , and assuming by playing is what resistance i get, only the last one is around what i been used to at 0.332ohm, the rest are higher resistance.

    i am wondering if higher resistance couldn't just yield the same vape i'm used to only with less power. donno how to calculate this. don't know what variable for 'vape' is to find the right equation_ is it heat?

    wouldn't Joule's power=current squared multiplied by resistance be better for that? there's something i'm missing isn't there hmm
    You are over thinking it, just play around with different types of wire and coil styles. Don't concentrate on your ideal wattage so much, shoot for an ideal coil that satisfies your wants.
     

    Skunk!

    Vaping Master
    ECF Veteran
    Jan 25, 2014
    5,569
    41,760
    Las Vegas
    oh oh oh i forgot i forgot_ zivipf have sexcore fusedclappers for a wire! wanted to ask you guys abt it

    Fused Clapton Wire

    impressive menu too. if didn't already have a quad spool...
    Tri, Quad core and Flat are my main all purpose wire. Those are good for a wide range of power.I like the hex for big single coil builds. It doesn't really work so well for duals. The hex is great in the Axial because it is designed as a dual so it has enough AF for the coil. Many attys don't.
     

    Terri McVeety

    Super Member
    ECF Veteran
    Nov 9, 2018
    779
    4,727
    67
    NE Texas
    OH push mowing..forget it, I had a rider. It was not the lawn as much as it was all the gardens, fences, weeds, keeping the brush behind the house at bay..etc.
    I am totally in charge of flower beds. 50 lb bags of rocks galore and STILL the weeding. THAT’S a labor of love!!
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,373
    88,444
    New Zealand
    Virmy now just you be patient. Any time you start to feel that itch...think about all the other Axial lovers out there leaning back with half closed eyes. Thick, saturated, satisfying vape clouding the air. It'll make you feel so happy...won't it?
    :evil:

    @virm

    sunblue.jpg


    A notanAxial RDA on a notadotSquonk ;)
     

    chanelvaps

    ECF Guru
    ECF Veteran
    Verified Member
    Oct 3, 2013
    16,033
    85,315
    Burbank CAlifornia
    I am totally in charge of flower beds. 50 lb bags of rocks galore and STILL the weeding. THAT’S a labor of love!!
    Yes, thinking I might enjoy just the gardening and let the guy do the yardwork.
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,373
    88,444
    New Zealand
    so per SE with ID 3mm and 6 wraps while leaving the others at default Legs 5mm and wrap spacing 0.05 , and assuming by playing is what resistance i get, only the last one is around what i been used to at 0.332ohm, the rest are higher resistance.

    i am wondering if higher resistance couldn't just yield the same vape i'm used to only with less power. donno how to calculate this. don't know what variable for 'vape' is to find the right equation_ is it heat?

    wouldn't Joule's power=current squared multiplied by resistance be better for that? there's something i'm missing isn't there hmm

    Since you are using a regulated mod - completely ignore trying to get the same resistance from your claptons and flat wire. For 20-35 watts choose the 0.8 x 0.2mm 25awg, for 35-50 watts use 1.0 x 0.2mm 24awg and for above 50 watts get 0.8 x 0.3mm 23awg

    Where do you get the .2*.8? Thats Ni80?

    Zivipf is a German site that stocks it, and plenty of other quality wire goodies:
    NiChrome Flat Wire 0.8x0.2mm / .031*.008" - AWG 25
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    I just want a simple model. Would be thrilled to have the needle threader and thread cutter. Any recommendations?
    Enjoying my own Nana Butter today in my Aromamizer (first serious go with this guy since the lung surgery because I was afraid :ohmy:)
    Yes I remember after my pleuradesis I was scared to jolt it or move too aggressively but gradually you realise that nothing's going to happen and the fear gets less. I found that gradually increasing excersize was the thing that made me realize that all was much stronger than you think....

    Hope you're ok sweetie and congrats on getting the aromaniser going again :wub:
     

    Users who are viewing this thread