hittman

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Contest Winner!
  • Jul 13, 2009
    62,673
    183,752
    Somewhere between here and there
    If you need me to i can make a couple of calls to vape shop owners i know and ask them if they deliver to the US.
    Just looked it up in some Spanish based vape shops but didn't see anything,quick call and i can find out if you like.

    Tomorrow thou,almost midnight here he he

    I don’t know if it’s worth that much trouble to just get a couple caps.
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    62,673
    183,752
    Somewhere between here and there
    Yeah something like that. I don't find that with the Sceptre coils though. I don't know...there's just something I don't like with the Z coils.
    That creates a dilemma for me now. I want that Coolfire mod, but not the Zenith tank on top. Guess i'll have to wait a few months until they sell the mod alone...:(

    I’ve never gotten an off taste from them but maybe my tastebuds aren’t as sensitive. I love the .3 coils for Rdl.
     

    Javichu

    Account closed on request
    ECF Veteran
    Mar 8, 2020
    3,084
    17,829
    50
    Spain
    I don’t know if it’s worth that much trouble to just get a couple caps.

    Oh my bad,didn't read the post properly and i thought it was the mod itself.

    Hmm,i am guessing those are pretty lightweight so they could be sent in a plain envelope like a letter.
    Just looked up some of the major websites here in Spain but haven't seen any caps but maybe they can order those.

    Well the offer stands,just let me know if you want me to make the calls and i will give it a try tomorrow morning (almost 2 am here now).
     

    Redbird11

    Vaping Master
    ECF Veteran
    May 24, 2020
    7,658
    47,197
    Missouri, USA
    Don’t feel bad,Javi. I’ve lived in the states all my life and I swear every time I think I know all the slang, another generation comes along and invents a whole new language.
    It's really hard to keep up with the trends. I blame the the Tik Toks, MTV, and MySpace.
     

    Javichu

    Account closed on request
    ECF Veteran
    Mar 8, 2020
    3,084
    17,829
    50
    Spain
    It's really hard to keep up with the trends. I blame the the Tik Toks, MTV, and MySpace.

    You mean the ''new'' MTV right?
    Supposedly MTV stands for Music Television Channel but that was only back in the 80's and 90's,if my memory doesn't fail me it was in the late 90's when it started going downhill.

    And to add to the list you forgot twitter,facebook and onlyfans ;)
     

    Pigs

    Vaping
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    That’s the comparison I’m needing. Can’t wait to hear what you think
    Ok Mel I've changed over to the 3mm af pin and raised my coil up. Vaping even better/ smoother air. Really like this RBA.

    Mobb coil placement.jpg

    I've got a couple of very short ear muffs sticking out the wick ports. I know some people like to cut them flush but I get a bit nervous about not enough cotton covering the holes.

    Mobb wick.jpg

    The Allen key size for the posts is 0.9mm.
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    62,673
    183,752
    Somewhere between here and there

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,556
    89,945
    New Zealand
    RDL - So far I'd have to say the Mobb Mini is right on par with the Xeta. Maybe better. Beats the VapeShell and VapeSnail for flavour.
    I'm using the exact same 0.5 Ohm Ni80 fused claptons, same cotton and same juice. Both in BBs.

    The draw on the Xeta with the widest chimney reducer installed is tighter than the Mobb wide open with the 3.5mm af pin. I'm going to try the 3mm pin today. I'm running the Mobb at around 28W and the Xeta at 24W.

    It's still only my first build in the Mobb and I started with the top of the coil just poking up above the top of the posts. Next I plan to try placing it higher so that about half the coil is sitting above the posts. That seems to be the sweet spot according to most pundits. Pretty sure @Hightech Redneck mentioned he a preferred high coil placement.

    The post screws are tiny grubs and the SXK version comes with a really flimsy little Allen key. It's not a great fit and feels like it could strip the blighters easily.
    @NolaMel I'd recommend using a better quality tool if you have one that small. I don't, but plan to visit the hardware store today to get a set.

    There are some decent close up build shots in this review:



    Brilliant :thumbs: I've had the Mobb mini and Exocet v2 wish listed, as I thought they were the two with most air. I just wasn't sure which had the best flavour. Looks like the Mobb is the winner. Now I just need a device to put one in :D
     

    NolaMel

    ECF Guru
    ECF Veteran
    Verified Member
    Nov 17, 2012
    12,815
    80,994
    New Orleans
    RDL - So far I'd have to say the Mobb Mini is right on par with the Xeta. Maybe better. Beats the VapeShell and VapeSnail for flavour.
    I'm using the exact same 0.5 Ohm Ni80 fused claptons, same cotton and same juice. Both in BBs.

    The draw on the Xeta with the widest chimney reducer installed is tighter than the Mobb wide open with the 3.5mm af pin. I'm going to try the 3mm pin today. I'm running the Mobb at around 28W and the Xeta at 24W.

    It's still only my first build in the Mobb and I started with the top of the coil just poking up above the top of the posts. Next I plan to try placing it higher so that about half the coil is sitting above the posts. That seems to be the sweet spot according to most pundits. Pretty sure @Hightech Redneck mentioned he a preferred high coil placement.

    The post screws are tiny grubs and the SXK version comes with a really flimsy little Allen key. It's not a great fit and feels like it could strip the blighters easily.
    @NolaMel I'd recommend using a better quality tool if you have one that small. I don't, but plan to visit the hardware store today to get a set.

    There are some decent close up build shots in this review:


    Ty. Pretty sure I have one that will fit. Do you think the screws could be replaced? I was hoping for something more durable than the xeta.
     

    Pigs

    Vaping
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    Brilliant :thumbs: I've had the Mobb mini and Exocet v2 wish listed, as I thought they were the two with most air. I just wasn't sure which had the best flavour. Looks like the Mobb is the winner. Now I just need a device to put one in :D

    Get one of these Ange!

    Boxx.jpg


    It is really comfortable to hold and fire. I thought the squared off design would make it clunky but the battery tube sits in the palm and feels nice.
    The cuttaway for the fire button that @hittman mentioned makes it feel smaller than a BB. It fires fast and the extra air compared to a BB really suits the Mobb mini.

    Boxx Mobb.jpg


    And with the Xeta

    Boxx Xeta.jpg



    Build quality is just like the Mixx
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,556
    89,945
    New Zealand
    Feel free to jump on me...
    I love Innokin..always have, but I just can't get along with their Z coils. I've tried just about the whole range and really trying to like them..but uh uh.
    I don't really know how to explain, but they kinda give off a weird flavor that interferes with me...don know, but i've given up on them. Every now and again I go back and re try it..but get the same result.

    The flavour from a drop-in, is so hard to translate between different ppl - unless we are all using the exact same juice. And have the exact same tastebuds.

    What ones have you tried?
    Zenith-Plexus-Z-Coil-11.jpg

    The 0.3, 0.5 and 0.45 are mesh.

    My fave is the 0.3ohm for the airflow and flavour, but I also like the 0.8. If you want to try a 0.3ohm, before you buy the Zenith 2 - I can mail you one.
     

    Pigs

    Vaping
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    Ty. Pretty sure I have one that will fit. Do you think the screws could be replaced? I was hoping for something more durable than the xeta.
    You could probably get grub screws of that size somewhere and there are spares in the pack. At least the posts/clamps aren't fragile like the Xeta.
     

    NolaMel

    ECF Guru
    ECF Veteran
    Verified Member
    Nov 17, 2012
    12,815
    80,994
    New Orleans
    Ok Mel I've changed over to the 3mm af pin and raised my coil up. Vaping even better/ smoother air. Really like this RBA.

    View attachment 946213

    I've got a couple of very short ear muffs sticking out the wick ports. I know some people like to cut them flush but I get a bit nervous about not enough cotton covering the holes.

    View attachment 946215

    The Allen key size for the posts is 0.9mm.
    Bonus points, Pigs! I do have that size :). I like to leave a “scut”, I think it wicks better
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,556
    89,945
    New Zealand
    Get one of these Ange!

    View attachment 946221

    It is really comfortable to hold and fire. I thought the squared off design would make it clunky but the battery tube sits in the palm and feels nice.
    The cuttaway for the fire button that @hittman mentioned makes it feel smaller than a BB. It fires fast and the extra air compared to a BB really suits the Mobb mini.

    View attachment 946225

    And with the Xeta

    View attachment 946223


    Build quality is just like the Mixx

    Bludger looks absolutely smitten. And so am I :wub:

    I thought it looked a bit boxy too, so hand feel is similar to a Mixx? Brilliant to see they have given it dual air slots. A Boxxy Mobby it will be :thumbs:
     

    Fredman1

    Vaping Master
    ECF Veteran
    Mar 27, 2017
    4,052
    22,790
    68
    New Zealand
    The flavour from a drop-in, is so hard to translate between different ppl - unless we are all using the exact same juice. And have the exact same tastebuds.

    What ones have you tried?
    Zenith-Plexus-Z-Coil-11.jpg

    The 0.3, 0.5 and 0.45 are mesh.

    My fave is the 0.3ohm for the airflow and flavour, but I also like the 0.8. If you want to try a 0.3ohm, before you buy the Zenith 2 - I can mail you one.
    I've used the 0.8, 0.48, 1.0, and the 0.3
    It's not that they taste bad or that Ange. It taste to me that there's something in there...They all have a distinct 'taste' (for lack of a better word) that's different to other coils. I can faintly taste it through my flavors. Thinking about it, I haven't yet picked that up from any other brand of drop in coil.
    I think it has to do with what material Innokin uses as a cotton. They do mention in their marketing that the coils lasts longer. That leads me to believe they use a different material.
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,556
    89,945
    New Zealand
    I've used the 0.8, 0.48, 1.0, and the 0.3
    It's not that they taste bad or that Ange. It taste to me that there's something in there...They all have a distinct 'taste' (for lack of a better word) that's different to other coils. I can faintly taste it through my flavors. Thinking about it, I haven't yet picked that up from any other brand of drop in coil.
    I think it has to do with what material Innokin uses as a cotton. They do mention in their marketing that the coils lasts longer. That leads me to believe they use a different material.

    That sounds like the problem to me. It's a PITA for you though.
     

    Users who are viewing this thread