Zazie

ECF Guru? No!
Supporting Member
ECF Veteran
Nov 2, 2018
10,800
72,400
Maine, USA
I don't have any recommendation for chip'd mods but have you considered a mech mod, or two?

They are dead simple, have very little that can go wrong and some would probably last through a nuclear war.. We wouldn't but the mod might still be standing....

If you are worried about vaping gear getting the ax and want to make sure you have gear that will last forever +1 day, I'd recommend a mech...

Sorry not what you asked but my .02 nonetheless... :D

Mech mods make me nervous, but I'm attracted to their simplicity and potential longevity (electronics are so persnickety). I need to study up on them some more.
 

raqball

Vaping Master
ECF Veteran
Verified Member
Jan 22, 2010
4,283
9,282
Mech mods make me nervous, but I'm attracted to their simplicity and potential longevity (electronics are so persnickety). I need to study up on them some more.

If you are not an ultra low ohm vaper then they really are simple and nothing to be worried about. Get good batteries don't get crazy with low ohm builds and rock on...

Either way, something to consider...
 
Last edited:

Zazie

ECF Guru? No!
Supporting Member
ECF Veteran
Nov 2, 2018
10,800
72,400
Maine, USA
If you are not an ultra low ohm vaper then they really are simple and nothing to be worried about. Get good batteries don't get crazy with low ohm builds and rock on...

Either way, something to consider...

I will never be a builder and am using the Zenith tank. Would that work? If so, what mech mod would you recommend? I see that some come with a locking mechanism. That sounds comforting.
 

Skunk!

Vaping Master
ECF Veteran
Jan 25, 2014
5,569
41,762
Las Vegas
I wouldn't want to drop either mod, but I'm betting the SL Class will fare much better than the Mirage in that situation. SL Class would likely just suffer some cosmetic issues. The Mirage resin around the mod isn't very thick, and the battery door might be a problem in this situation as well.

The SL Class feels like a tank in comparison.
The SL is tough. Mine has been dropped more than I care to admit. It has s few small dings that are barely noticeable. The finish on mine is getting worn though. I have had it for abut 3 months.
20181220_121502.jpg

You can see the wear on the black. Just below the black there are 2 dings where it fell hard. This mod has been my edc since I got it. I love the chipset and joystick but you may not.
 

raqball

Vaping Master
ECF Veteran
Verified Member
Jan 22, 2010
4,283
9,282
I will never be a builder and am using the Zenith tank. Would that work? If so, what mech mod would you recommend? I see that some come with a locking mechanism. That sounds comforting.

Sure would... What ohm coils do you use in it?

Yes most of the better mechs come with some type of fire button lock...

When I was into mechs I only had high end ones (Super T, GG, Atmizoo ect) so sorry I don't have any new mech recommendations to offer....
 

Zazie

ECF Guru? No!
Supporting Member
ECF Veteran
Nov 2, 2018
10,800
72,400
Maine, USA
Sure would... What ohm coils do you use in it?

Yes most of the better mechs come with some type of fire button lock...

When I was into mechs I only had high end ones (Super T, GG, Atmizoo ect) so sorry I don't have any new mech recommendations to offer....

Darn. I originally said which coils I use but then thought it was extraneous info.

Anyway, I'm using both the .8 and the 1.6 ohm coils.
 

raqball

Vaping Master
ECF Veteran
Verified Member
Jan 22, 2010
4,283
9,282
Darn. I originally said which coils I use but then thought it was extraneous info.

Anyway, I'm using both the .8 and the 1.6 ohm coils.

Should be a-ok... What watts do vape them at? If you are not pushing high watts then good to go.....
 

dom qp

Ultra Member
ECF Veteran
Verified Member
Jun 15, 2015
1,847
9,890
37
South Central... Ontario
Just saw that you posted that for me. I've already preordered at $180 CAD after the discount.

$12 for securing it a month ago and not worrying about ChinaPost, in my opinion, is not really a loss. Looks like you did good preordering it.

No WV order yet, unfortunately.
 

raqball

Vaping Master
ECF Veteran
Verified Member
Jan 22, 2010
4,283
9,282

Punk In Drublic

Vaping Master
ECF Veteran
Aug 28, 2018
4,194
17,518
Toronto, ON
I will never be a builder and am using the Zenith tank. Would that work? If so, what mech mod would you recommend? I see that some come with a locking mechanism. That sounds comforting.

Zenith is a non adjustable, non protruding 510 pin – extra care is needed on what type of mechanical mod you choose.
 

NolaMel

ECF Guru
ECF Veteran
Verified Member
Nov 17, 2012
12,815
80,994
New Orleans
I was attracted the SX Mini SL because I was looking at mods with Yihi chips. Is there something wrong with it? I just started my research and have yet to read through what's been said about it here. Maybe I should switch my sights elsewhere (where?).

The Mirage looks nice, though. I may have to add it to the "covet" pile.
It all comes down to individual tastes. I have an old sx m class I still love. The Mirage didn’t tick the boxes for me, but there are people that absolutely love it. There are a couple of people on this thread that adore their mini SLs. Buy the one that appeals to YOU. I don’t either is a bad choice.
 

NolaMel

ECF Guru
ECF Veteran
Verified Member
Nov 17, 2012
12,815
80,994
New Orleans
I will never be a builder and am using the Zenith tank. Would that work? If so, what mech mod would you recommend? I see that some come with a locking mechanism. That sounds comforting.
No, needs a protruding pin
 

Users who are viewing this thread