Shinyitis Support Group

[Ricky Vapes]

Good morning shiners! Congrats to all the winners on the innokin giveaway! Awful lot of shiners in there. Must be the luck of the bunny. @Ricky Vapes next time a giveaway pops up be sure to rub one of the bunnies legs again for us.

Will do just let me know! Stevie nicks is probably the luckiest. Fleetwood mac sure did good and she aged beautifully over the years.

 

[Ricky Vapes]

We’ll soon see if there’s any truth to the lucky rabbit foot superstition, if Ricky starts winning every contest.

Morning all!

Mabye I do have four rabbits haha

If you had told me that I would have done this a few years back I’d say you were crazy. I mean I always liked animals but to have four rabbits? Lol I used to be a dope dealer and Addict who always tried to act hard . But the way I see it these rabbits made me tougher. They are good pals too.

 

[Ricky Vapes]

I ended up getting both the brass and the copper one, now I have the whole little set
You'll love your Rose Finch mate, I can't wait to see it

Can I see a Picture of the copper please???

 

[Pigs]

Congratulations to the shiny contest winners! Good karma comes a visiting.

 

[Fidola13]

Yup.

View attachment 860385

thanks!

 

[Pigs]

I don't think that's a pod. She looks way too happy.

Maybe it's an MFP (Multi Function Pod)

 

[Zazie]

Yes, congratulations to @AngeNZ, @Daniel Forsyth, and @bigbob2322. Damn you.

 

[AngeNZ]

Morning shinies

I have both the v1 and v2 running atm. With the DT it comes with (6.5mm bore) yes the v2 is more restricted than the v1 or the X. Not by a whole lot versus the v1 but it is very noticeable to me. I love the X wide open but the v2 is not even close to that. It's on par with the SMJY 2k16 Doggy wide open but it most closely matches the Venna. Don't you have a Venna?

FWIW I have the SXK version in my cart only because I think they do a better cloning job versus Ulton. Same with YFTK and Coppervape and their clones. The SXK vsn wasn't yet available when I got mine.

Hope that helps.

The SXK is showing as 'In Stock', so I may grab that version instead. Thank you - Venna airflow will be spot on . Also need... er want some more drip tips, so I'm FT shopping after work today

thanks.
ibeencruising
ibeencreepingandstalking
for prebuilts it's the same advice repeated, don't go fancy focus on mass and AVS is good... most are about wrapping your own

i guess ill make a thread, got to place the order before the 'chinese' new year

I couldn't find any kanthal, ni80, or ss 26ga pre-coiled coils at fasttech with a 3mm coil id. Grab that coilology kit, plus some 26ga wire in either kanthal, ni80 or ss316l.

And don't worry if the coils are cheap - they should be. All they do is heat up and cool down - you want quality tools, tanks and mods - but with wire it isn't that major

 

[AngeNZ]

Yes, congratulations to @AngeNZ, @Daniel Forsyth, and @bigbob2322. Damn you.

Thank you and everyone else - and congrats @bigbob2322 and @Daniel Forsyth

I'm stoked to be a winner, and I'm having trouble deciding

 

[virm]

Morning shinies



The SXK is showing as 'In Stock', so I may grab that version instead. Thank you - Venna airflow will be spot on . Also need... er want some more drip tips, so I'm FT shopping after work today



I couldn't find any kanthal, ni80, or ss 26ga pre-coiled coils at fasttech with a 3mm coil id. Grab that coilology kit, plus some 26ga wire in either kanthal, ni80 or ss316l.

And don't worry if the coils are cheap - they should be. All they do is heat up and cool down - you want quality tools, tanks and mods - but with wire it isn't that major

thanks for response, and my forthcoming cut in your wins i assume
i've found some actually, but not thru searching the size... i've gone through a couple hundred...
if it's not too much trouble:
I what pre-built kanthal me first mine

 

[charlie1465]

The mechlyfe is in stock as is the yachtsman, it's the innokin that is still preorder.

Thanks Letitia....with everyone (as usual) jumping on the band wagon it's difficult to remember which. Hopefully between us all we will end up testing most of them so that we can all end up with the best option. This is the one I've ordered....

42536 Authentic Reewape RUOK Replacement RBA Coil Head with 510 Connector Adapter for Voopoo VINCI / VINCI X Pod System Kit - Silver

 

[charlie1465]

You are in my thoughts Charlie. I hope everything goes as planned....

Thanks Skeebs.....long time no see. Where have you been?

 

[Letitia]

@AngeNZ just saw this on Noted:trinity episode.
Vanilla Ice Cream trinity (all %)
LB vanilla 5
TFA vanilla swirl 1.5
HS french vanilla ice cream .75

 

[Skeebo]

Thanks Skeebs.....long time no see. Where have you been?

I've been sprinkling my charming personality all over the forums still. I come in the Shiny thread to give out love (hearts) at least once a week. Take care of yourself man, I have added you to my list of anxieties.

 

[Ricky Vapes]

Morning shinies



The SXK is showing as 'In Stock', so I may grab that version instead. Thank you - Venna airflow will be spot on . Also need... er want some more drip tips, so I'm FT shopping after work today



I couldn't find any kanthal, ni80, or ss 26ga pre-coiled coils at fasttech with a 3mm coil id. Grab that coilology kit, plus some 26ga wire in either kanthal, ni80 or ss316l.

And don't worry if the coils are cheap - they should be. All they do is heat up and cool down - you want quality tools, tanks and mods - but with wire it isn't that major

At some shops out here prebuilt coils can reach upwards of 50 bucks for a pair

 

[virm]

At some shops out here prebuilt coils can reach upwards of 50 bucks for a pair

i'm going to be willing to chuck up a 100 per coil if this keeps going_ i started a fight and two make-your-own sermons in my other thread

 

[markfm]

At some shops out here prebuilt coils can reach upwards of 50 bucks for a pair

For that price they should made of mithril, forged at Khazad-dûm [emoji3]

 

[ShowMeTwice]

Can I see a Picture of the copper please???

Here's one of both...

 

[Don29palms]

At some shops out here prebuilt coils can reach upwards of 50 bucks for a pair

I sell my Killer coils for $25 for 6 coils shipped. That's a modest price for hand wound coils.

 

[Don29palms]

Here's one of both...
View attachment 860411

They are so beautiful polished up. Unfortunately they don't stay that way very long.