I don’t thin the cotton too much. Just a bit. The most important part to me is making sure the cotton goes just past the opening to the juice well.
A little longer than I go, but this is good.
Two good tutorials
Last edited:
I don’t thin the cotton too much. Just a bit. The most important part to me is making sure the cotton goes just past the opening to the juice well.
A little longer than I go, but this is good.
Two good tutorials
Cup for me too please!
Seriously Virm if you just post a photo or 2 we'll be able to get to the bottom of this. Do you have a phone?evening shinies_
very dull and mopey greetingss_ i;m back in the wicking nightmare. 40 cottonlaces thrown out by now. i'm thinking abt cancelling my order of wire etc
can't wait to catch up on the last day or so... loads of shiny shines i see!
even if they were good pics, what's going to show other than too thin or too thick? i've seen all the vids and got it right more than once_ i think at some point it's right but not broken in and i just keep thing until it's gone and the other key problem seems to be choking inside. don't know how to avoid it other than twisting while wicking thru...
here's the ones i made back when i was first asked. some are too thick others are too thin. the quality is horrible and the aim is worse (it's the selfie side camera. the other one is broken and the lady is out of town)
Wotofo Elder Dragon RDA or the Wotofo Recurve RDA. Both postless decks like the Serpent. Both have awesome flavour and easy to wick. Recurve doesn't have much of a juice well - which means you need to squonk it more often. The Elder Dragon is what I wanna try next
This is a placeholder post. It’s now 6:09 PM and I want to see how far behind I am by tomorrow around 8 AM. I need an objective scientific explanation for how far behind I feel each morning.
Charlie enjoy your first night home and hopefully a good night’s sleep. To all, a Happy Valentines Day and enjoy the evening!
Charlie enjoy your first night home and hopefully a good night’s sleep. To all, a Happy Valentines Day and enjoy the evening!
dry.burn while partially ok__ something not saturated in an otherwise ok wick., i think
often there's a sizzle after
i'm right one out of two times.so here goes,i'll don't twist after starting the cotton. just pull back and forth to feel light resistance. also why does your coil look so dark?
i'm right one out of two times.so here goes,i'll don't twist after starting the cotton. just pull back and forth to feel light resistance. also why does your coil look so dark?
that one wasn't fresh_ not normal?
started twisting after failures without.
always do pull back forth. sometimes see/feel some curling inside, think that's the problem, start combing, thinned..
Bought my son Spyro Reignited for his bitthday. I have been playing it more than him lol.
Last edited:
i would dry burn if that wire can. sounds like you need less cotton.i do not comb but i might be the odd one in the bunch.
Yes that's my experience to...its for taste only. Nicotine has to be added.
I did various extractions..cold, warm (slow cooker) and ultrasonic bath. I haven't yet filtered all to compare how, or if they differ. LoL yes I have a cupboard full off bottles two years old. I'll get to that in time. I'm buying a fridge to store them in as i'm unsure how long they can actually last.
I also used a coffee filter and the cotton ball stuffed in a big injector. Its clean but the natural sugars are still present and that's what clogs up the coils fast.
There's a technique here (on the forum) where the steeped liquid is frozen and then the scum (sugars) is seperated. That makes a very clean liquid that don't clog up.
"dry.burn while partially ok__ something not saturated in an otherwise ok wick., i think
often there's a sizzle after"
If you're getting dry or burnt hits your wick is too tight inside the coil.The Elevate is top air so you can experiment with less wick without fear of leaking - only a bit of gurgling or flooding if you go too far. Your wick tails look too long in all the photos to me. I'd cut them so they just poke past the threading. To get the best vape out of this RTA it's ok to hear some popping and crackling as you vape.
Best of luck Virmy!!
often there's a sizzle after"
If you're getting dry or burnt hits your wick is too tight inside the coil.The Elevate is top air so you can experiment with less wick without fear of leaking - only a bit of gurgling or flooding if you go too far. Your wick tails look too long in all the photos to me. I'd cut them so they just poke past the threading. To get the best vape out of this RTA it's ok to hear some popping and crackling as you vape.
Best of luck Virmy!!
giving in for the night_ with each new wick it's been going DUUUUUUUUUUUUUUUUUUUUUUUE SAAAAAAAAAAAAWTH
shanightie shinyties
shanightie shinyties
If you figure it out let me know because I loved them but hated the clogged coils and all the crust left behind
Similar threads
- Locked
