huh_ i guess those must chunky enough then. thanks for info
grrrrrrrrrrrrrrrrrr
i appreciate the info BUT I SAID NO AXEY BEFORE VIRMY GETSIE!!
huh_ i guess those must chunky enough then. thanks for info
grrrrrrrrrrrrrrrrrr
i appreciate the info BUT I SAID NO AXEY BEFORE VIRMY GETSIE!!
Good morning Shinyville! Doing something a little different for the family photo today. My son Matthew took 12 years of piano lessons, and I love to listen to him play. Today I'll share a couple videos of him playing piano. They are from a few years ago, but they are some of my favorites. Enjoy!
Hey Jude
Imagine
look at junior go! clapclapclap
hope you asked permission before sharing these, kid could sue ya
sounds fine too (toffee sounds disgusting though
)i ordered the clone i ordered it the sxk i found two remaining SS ones at focalecig, at the german warehouse nonetheless!
i watched some reviews of the authentic and found even more praise of the sxk clone in other threads_ pretty excited about
IN FACT ,
ehem
in light of this we have found our-lovely-self overcome by a spirit benevolent and have decide to issue the following-gah decree: to all subjects shiny of the thread whose-ah namesake they have taken, with present effect, shall be allowed the suction upon the metal fountain dubbed the Axial, with all rights of pleasure and swag, wherein swag means the flaunting of cool imagery. Bells of approvation and happinotaion, bellow: vape forth shinyatians! _ except porkie _ !
thank you! you are a scholar and gentle_er_lady! will make a good baseline (at least). only wondered abt ikea for the delivery.. not that renting a van for this isn't worth it if i have to..
Last edited:
Morning shinies
If you want to try flat wire, go the ni80 road:
NiChrome Flat Wire 0.8x0.2mm / .031*.008" - AWG 25
This one from Zivpf should be fine under 50watts
edited to add:
this one is slightly larger 24g instead of 25g:
NiChrome Flat Wire 1.0x0.2mm / .04*.008" - AWG 24
and this one is 23g:
NiChrome Flat Wire 0.8x0.3mm / .031*.012" - AWG 23
play with them in steam engine to see what you prefer
If you want to try flat wire, go the ni80 road:
NiChrome Flat Wire 0.8x0.2mm / .031*.008" - AWG 25
This one from Zivpf should be fine under 50watts
edited to add:
this one is slightly larger 24g instead of 25g:
NiChrome Flat Wire 1.0x0.2mm / .04*.008" - AWG 24
and this one is 23g:
NiChrome Flat Wire 0.8x0.3mm / .031*.012" - AWG 23
play with them in steam engine to see what you prefer
Last edited:
I just want a simple model. Would be thrilled to have the needle threader and thread cutter. Any recommendations?
Enjoying my own Nana Butter today in my Aromamizer (first serious go with this guy since the lung surgery because I was afraid)
Almost all the Brothers have some sort of threader. The PRW has a pull through, two hand style. It’s kind of prehistoric, but it works. The EM has a one hand, push through threader. Much nicer, some find it finicky. I have no problem with it.
The Pacesetter does not cut thread, it’s not a big deal to me. I was looking for speed control and a back up button. It also does lock stitch, which I’ve never had but I think I’ll like. The EMs do an automatic lock stitch and it’s very clean. The new EM cuts jump stitches, and there can be hundreds of threads to cut in a single stitch out - like that ouija bag- so thread cutting is a huge deal there
Brother Simplicity SB3129 Computerized Sewing Machine
This might suit you. I bought from Moore’s, not Kens, and I called rather than shop online. Machines are going like hot cakes with the mask making. So it’s nice to know they actually have your item in stock.
I still haven’t gotten a shipping email so I’m getting nervous lol.
Virmy now just you be patient. Any time you start to feel that itch...think about all the other Axial lovers out there leaning back with half closed eyes. Thick, saturated, satisfying vape clouding the air. It'll make you feel so happy...won't it?
Good morning Shinyville! Doing something a little different for the family photo today. My son Matthew took 12 years of piano lessons, and I love to listen to him play. Today I'll share a couple videos of him playing piano. They are from a few years ago, but they are some of my favorites. Enjoy!
Hey Jude
Imagine
Very talented boy Rob, you must be proud.
Virmy now just you be patient. Any time you start to feel that itch...think about all the other Axial lovers out there leaning back with half closed eyes. Thick, saturated, satisfying vape clouding the air. It'll make you feel so happy...won't it?
Someone say thick, saturated, satisfying vape?
I broke out a new squonk bottle last night. My absolute favourite- the sjmy from ft. Called "super soft" but is nice and firm silicone with a thick base. Really good threads on the cap and a catch cup design that stops any overflow from getting in the mod.
https://www.fasttech.com/product/8288702-sjmy-super-soft-bottom-feeder-bottle-for-bf
One thing I hate is that new squonk bottle plastic smell/taste. So I'm trying an experiment (read it somewhere on ecf) of filling the bottle up with vinegar and leaving overnight. Will let you guys know the result in a few hours.
https://www.fasttech.com/product/8288702-sjmy-super-soft-bottom-feeder-bottle-for-bf
One thing I hate is that new squonk bottle plastic smell/taste. So I'm trying an experiment (read it somewhere on ecf) of filling the bottle up with vinegar and leaving overnight. Will let you guys know the result in a few hours.
You’re welcome. I know that if you get to looking you’re going to see those $2k Innov-is and want that instead though
. Very shiny.Morning shinies
If you want to try flat wire, go the ni80 road:
NiChrome Flat Wire 0.8x0.2mm / .031*.008" - AWG 25
This one from Zivpf should be fine under 50watts
edited to add:
this one is slightly larger 24g instead of 25g:
NiChrome Flat Wire 1.0x0.2mm / .04*.008" - AWG 24
and this one is 23g:
NiChrome Flat Wire 0.8x0.3mm / .031*.012" - AWG 23
play with them in steam engine to see what you prefer
perfect_ thank you
think i'll be picking up a flat spool and one of them SS alien, maybe the .30 (the spools are all with ka1 so not sure, plus i'd like to finally try SS properly, my one try was the nunchaku2 mesh and it didn't fire didn't fire didn't fire didn't fire then burnt...)
that and i'll probably order the wotofo framedstaple spool at some point. it's lovely! don't know why i didn't take to it at first..
vic's latest whats up predicts new shenzen shutdowns... donno if i should wait for a sale..
gonna be odd to wait till evening to try things out. prbbly won't have the will/time to rewick anything if i don[t have to..
Virmy now just you be patient. Any time you start to feel that itch...think about all the other Axial lovers out there leaning back with half closed eyes. Thick, saturated, satisfying vape clouding the air. It'll make you feel so happy...won't it?
just coz i can't eat you don't mean i won't chop you up
I already do want one but I have to choose my hobbies I guess. Drives me crazy to see things sitting around that I bought and do not use.You’re welcome. I know that if you get to looking you’re going to see those $2k Innov-is and want that instead though
At the beginning of the season here, I almost bought an electric mower. I already have a great Stihl weed eater. I decided I was going to do my own lawn maintenance again. It has only been about 5 years since I was maintaining close to an acre yard and a pool (I hired out my yardwork in CA during those five years) So I find one I like and put it in a cart at the local Power Sport place where I know I can go for maintenance. Do not pull the trigger just yet. In the next few days I decide to weed eat my backyard along my new fence. Only I cannot start the weed eater. I convince myself that it is only because it has not been started during the winter so I take it to the same Power Sport guy, he starts it pretty quick but agrees with me the winter rest might be the reason I could not start it. I get home, am able to start it again and weed eat my back yard. When I am done, I am exhausted and hot and I promptly come inside and take the darn lawnmower out of the cart and hire a lawn guy. Today is his second time here because I only want bi-weekly but I am inside happily watching someone else do my chores. Not sorry.
isn't vinegar an acid?
getting into the mod? something i should knows abt now that i'm mods deep into squonking?
Morning shinies
If you want to try flat wire, go the ni80 road:
NiChrome Flat Wire 0.8x0.2mm / .031*.008" - AWG 25
This one from Zivpf should be fine under 50watts
edited to add:
this one is slightly larger 24g instead of 25g:
NiChrome Flat Wire 1.0x0.2mm / .04*.008" - AWG 24
and this one is 23g:
NiChrome Flat Wire 0.8x0.3mm / .031*.012" - AWG 23
play with them in steam engine to see what you prefer
so per SE with ID 3mm and 6 wraps while leaving the others at default Legs 5mm and wrap spacing 0.05 , and assuming by playing is what resistance i get, only the last one is around what i been used to at 0.332ohm, the rest are higher resistance.
i am wondering if higher resistance couldn't just yield the same vape i'm used to only with less power. donno how to calculate this. don't know what variable for 'vape' is to find the right equation_ is it heat?
wouldn't Joule's power=current squared multiplied by resistance be better for that? there's something i'm missing isn't there hmm
Similar threads
- Locked
