No idea, but I'm seriously considering adding it to may cart.
As soon as @AngeNZ lets me know where to get that drip tip.
No idea, but I'm seriously considering adding it to may cart.
As soon as @AngeNZ lets me know where to get that drip tip.
Excellent! Truly level up quality and performance from the mainstream.Soooo, how do you like the Haar???
Give us the details Man!!!
Super smooth airflow. I'm running it with the 3 holes on each side open. Side airflow inside well placed in relation to the posts so it's quite easy to get a coil in the right position for maximum flavor and vapor production. In fact it would be tougher if not impossible to get it actually wrong. You'd have to go out of your way to pull the coil up way too high or something.
Build quality also superb, but not 100% flawless. Threads ARE flawless, fit and finish is too. There are however some very minor machining marks inside the chamber that you have to look for and get the light just right to see.
Easy to build, but not the very easiest. Works best with coils wound counter clockwise. Coil needs to be held secure to keep it from worming out while tightening, but not a big deal to negotiate. Some others are far worse for this. Once secure they ARE secure.
Meaty screws and posts so it would take some enthusiasm to strip either the allen heads in the screws or the threads in either the screws or the posts. The screws are also placed right up against the inside of the posts so anything from thin micros to some fairly wide complex coils can be mounted with confidence.
It has a retention ring on the base that holds in the deck, which can be removed with a full tank. Very nice, but make sure it's tightened all the way when reassembling. It can give the illusion of being fully tight, but needs a bit more. It won't leak if you don't, but it will leave some small gaps.
Wicking is very easy, but use a fair bit more cotton than you might at first be inclined to use. 5 or 6 mm beyond the edge of the deck. The ports are wide and deep, but juiceflow comes from the top and onto the wicking along the outside of the deck. Not from the side or underneath. You need to have the ports full, and fluffy on top for the juice spout things to sit snugly on the cotton. This I could see somebody getting wrong and having some flooding, but quite simple to overcome if so.
Filling is a BIT fidgety, but also no big deal once you have it down. You close the juiceflow, screw off the cap, which has a pretty long travel, fill it up and screw the cap back down. If it's just been rewicked, I open the juiceflow right away. If it's being REfilled, I hit it a couple times before opening the juiceflow, just as an extra measure to avoid too much juice in the chamber. Not an absolute necessity.
The drip tip is a 2 piece affair with a SS base and interchangeable top pieces with a larger and smaller bore depending on what you prefer. It will sit crooked because of the way it goes into the chimney with one o-ring. and the cap with the other. You can push on it all day long and will NOT go in straight. Give it a little twist while pushing it in and it goes fully in and straight and stays that way
Superb rdtl vape. That's it's wheelhouse. Which makes sense because that's Todd's wheelhouse too. It's neither a big air cloud chaser nor really mtl either, though you could tighten it up and be happy with it I suppose.
Wow, I went way outta hand here, but I'm sure I forgot something anyway.
Last edited:
Looks like you have all your bases covered.
My list has the Haar and Nibiru. Oh yeah, and the Dvarw DL FL. The Gear is off my list, DL takes its place. I like my Dvarw's. They deliver. It's a simple RTA, great flavor, easy to build and maintain. For me, IMO, Dvarw's are a no-brainer.
Atomizers--still can't decide which Tripod I want. Everybody likes the Ulton, the other no-name Tripod is half the price and no complaints. Oh, and the FatBoy bubble glass for Tripod is in another cart.
- Shopping cart summary
PRODUCT UNIT PRICE QTY TOTAL
Replacement Screws for Atomizers (10-Pack)
304 SS, M2.5*4mm (Phillips head), 10-Pack
SKU 3989201: Ships in 7 business days ETA: 7/25/2020 (2 days)
$0.75
10-pack $0.75Remove ▾Authentic OFRF Gear RTA Rebuildable Tank Atomizer (Standard Edition) FREE SHIPPING TO UNITED STATESGear, Gunmetal (Standard)
SKU 9683023: Ships in 7 business days ETA: 7/25/2020 (2 days)
$26.23$26.23
ULTON Tripod Styled RTA Rebuildable Tank Atomizer FREE SHIPPING TO UNITED STATESSS + Glass, Silver (ULTON)
SKU 9703842: Ships in 5 business days$24.95$24.95
ULTON Replacement Extension Kit for Tripod Styled RTA FREE SHIPPING TO UNITED STATESExtension Kit (3.4ml), Glass + Metal (ULTON)
SKU 9706718: Ships in 5 business days$5.53$5.53
Tripod Styled RTA Rebuildable Tank Atomizer FREE SHIPPING TO UNITED STATES316 SS + Glass, Silver
SKU 9725055: Ships in 5 business days$12.85$12.85
Dvarw MTL FL Styled RTA Rebuildable Tank Atomizer FREE SHIPPING TO UNITED STATESFL,22mm,2/3.5/5ml,SS + Glass,Silver(w/ 10*Inserts)
SKU 9728438: Ships in 7 business days$21.31$21.31
Haar Styled RTA Rebuildable Tank Atomizer FREE SHIPPING TO UNITED STATES316 SS, Silver
SKU 9728639: Pre-order ETA: 7/25/2020 (2 days)
$17.70$50.55
($2.55) off
Any insights?
Nice looking order, except there's no Brunhilde in there! That can always be added
One thing I would definitely say is if you do place your order keep a close watch on the ETA dates that FT give you, they always seem to change with things that aren't in stock
Looks beautiful Charlie
Oh Charlie, that is a stunning combo
I've had an eye on the Mixx since I first saw it. I love how I could use taller tanks yet still have a low profile. The Mixx is very firmly NeedListed
No one wants to say it but....it will make the brunhilde look not so hmmm tall and mighty
Today's vapemail is brought to you by the letters FT
View attachment 897885
1 Juggerknot Mini clone RTA
@Fredman1 and margarita swirling @Letitia along with @the wind - what leg height are you guys using?
That one looks pretty and tiny or not hmm. Top dual airflow? single or dual coils?
It looks like quite a few Shiny People received Vape Mail today
Well I might just have to add one more then
A beautiful girl all dressed in red and gold arrived today! Meet Brunhilde Red MTL RTA
View attachment 897893
And a little picture with all of her new sisters
View attachment 897895
Congrats Daniel. You are getting closer to complete your collection
and she should be call Sanngriðr which in norwegian sounds like "sangre" in Spanish which means blood And your favourite on special
Vapefly Brunhilde MTL RTA 23mm 5ml Rebuildable Tank Atomizer at $23.80
Excellent review mate!!!
I will likely get one. Your review, and solid tips, are very helpful. Thanks!!!
Looks like you have all your bases covered.
My list has the Haar and Nibiru. Oh yeah, and the Dvarw DL FL. The Gear is off my list, DL takes its place. I like my Dvarw's. They deliver. It's a simple RTA, great flavor, easy to build and maintain. For me, IMO, Dvarw's are a no-brainer.
Another conundrum. Do you think that we'll be able to order originals from Europe in the (near?) future? I always start with clones.
Congrats Daniel. You are getting closer to complete your collection
And your favourite on special
Vapefly Brunhilde MTL RTA 23mm 5ml Rebuildable Tank Atomizer at $23.80
Thanks
Her name is Friday, I can't even say that other word
Zazie's already confused me with that one!!The other colours I need are only available in Germany
Mine has just been updated. Both are gone.
But still TBD...Hmm... TBD.
Dinner first.
Talk amongst yourselves. BBL.
Atomizers--still can't decide which Tripod I want. Everybody likes the Ulton, the other no-name Tripod is half the price and no complaints. Oh, and the FatBoy bubble glass for Tripod is in another cart.
- Shopping cart summary
PRODUCT UNIT PRICE QTY TOTAL
304 SS, M2.5*4mm (Phillips head), 10-Pack
SKU 3989201: Ships in 7 business days ETA: 7/25/2020 (2 days)
$0.75
10-pack $0.75Remove ▾
SKU 9683023: Ships in 7 business days ETA: 7/25/2020 (2 days)
$26.23$26.23
SKU 9703842: Ships in 5 business days$24.95$24.95
SKU 9706718: Ships in 5 business days$5.53$5.53
SKU 9725055: Ships in 5 business days$12.85$12.85
SKU 9728438: Ships in 7 business days$21.31$21.31
SKU 9728639: Pre-order ETA: 7/25/2020 (2 days)
$17.70$50.55
($2.55) off
Any insights?
Tripod that was it!
Adding now!
I honestly can't see why not. Currently there are millions of inbound small pkg's daily. There aren't enough customs agents to individually inspect each of the current number of small packages. It's a numbers thing. US Customs is, and always has been, more interested in making the big busts. Follow the $$$, yes/no.Another conundrum. Do you think that we'll be able to order originals from Europe in the (near?) future? I always start with clones.
I suspect Europe, and others too, will get very creative shipping to the US in the near future. Some already have. Just depends on what happens. I am sure some will stop shipping here. Question is who and how many will go away. Right???
My last 2 packages from Europe, during the last two months, were both labeled "Parts". The shipper was not labeled as the online store (personal names instead). So there was no indication of them being RTA's. And that is obviously without any regulations. Makes me think they are ready for the potential "whatever".
Any US regulations won't stop me, you and others from trying. I am confident we will get very creative and succeed. One way or another.
Thanks
Her name is Friday, I can't even say that other word
The other colours I need are only available in Germany
Hmm might need to talk to this guy
she should be call Sanngriðr which in norwegian sounds like "sangre" in Spanish which means blood
And I thought we were done with Sanngriðr and the "thr" pronunciation for ðr.Let's just pronounce it "sangreblood" and call it a day.
I honestly can't see why not. Currently there are millions of inbound small pkg's daily. There aren't enough customs agents to individually inspect each of the current number of small packages. It's a numbers thing. US Customs is, and always has been, more interested in making the big busts. Follow the $$$, yes/no.
I suspect Europe, and others too, will get very creative shipping to the US in the near future. Some already have. Just depends on what happens. I am sure some will stop shipping here. Question is who and how many will go away. Right???
My last 2 packages from Europe, during the last two months, were both labeled "Parts". The shipper was not labeled as the online store (personal names instead). So there was no indication of them being RTA's. And that is obviously without any regulations. Makes me think they are ready for the potential "whatever".
Any US regulations won't stop me, you and others from trying. I am confident we will get very creative and succeed. One way or another.
Mines were labeled as car parts
Thanks Rob I'll give the fingernail method a try. It has a tendency to slip out on me and it drives me nuts
On the shiny front I report one of my first purchases but it arrived recently. Go figure
Is tiny
but it hit like a truck for me at least
Size comparison with the Vaporesso X-tra
Is tiny
but it hit like a truck for me at least Size comparison with the Vaporesso X-tra
I tried to have a chat a little while ago with the Worm, then he went missing all of a sudden
I think I scared him off
Similar threads
- Locked
