Shinyitis Support Group

[chanelvaps]

That would mean nothing for me because if you desperately wanted one then I’d sell it

I desperately want one but would not ask you to part with it if you are attached. Pm me if you are not too attached. I will pay top dollar

 

[chanelvaps]

My hand check for today.

 

[AngeNZ]

Morning shinies

I'm starting to get a new fave coil. It's a tricore ni80 30*3/38 2.5mm id. And because I can, I took its pic before centering it.

 

[Z-Lee]

Purple Pico Squeeze 2's for $35 at MyVaporUS still.

Purple Pico 2 Squeezes.

 

[Fidola13]

Lol! That would mean nothing for me because if you desperately wanted one then I’d sell it. I think. I’m still deciding if I like the stealth matte black or the awesome blue P3 still sitting in its original box.

I put silica bags in all my mods and atty to keep the moisture levels down. Not sure if that really works very well then but for 100 silica bags for less than $10 It can be a bit over the top with the care I give them and all my mods. These are the extremes I go to to save all and take car of all my mods!!

I think If you asked anyone on this thread how well I keep my mods they’ll inform you as good as gold!


When I first started vaping almost 4 years ago I fell in love with everything to do with TC but admittedly I use mainly power or wattage modes now. I know my attys 1st so well that I know exactly when I’m getting to the edge and when it needs to be changed. So I feel pretty confident that I’m headed in the right direction.

Of course the only downside to having a Provari is they must find away to update the firmware on the P3 they stopped offering it because you’d need to send it back to them via shipping. Honestly this doesn’t sound like a huge deal but I’m not into computing so I wouldn’t know where to begin. Since there are so many out there it would be great if they could post the update via Wi-Fi

So what I’m trying to say is I rarely use them. And

you have these in the MInikin 2? I def would want to buy them. I have been looking for 2+ years. If you want to part with them I am your girl to buy them.

Nah the raw is the Minikin 2 in raw which I’ll hang on to the others ore provaris which I will sell one once I decide which one I like the most.

 

[Fidola13]

Afternoon everyone. I hope everyone is doing well especially along the East coast.

I feel like buying something. I’ve got the itch but nothing so far really interests me. Any suggestions?

 

[hittman]

Afternoon everyone. I hope everyone is doing well especially along the East coast.

I feel like buying something. I’ve got the itch but nothing so far really interests me. Any suggestions?

I finally got a response from FT on the BXR I was interested in. All they said was basically what the website said which is it could take 30 days from order to shipping. I might look around some more.

 

[hittman]

After I wrote that, I checked the FT website and it said 38 days to ship. I went to 3Fvape and they had the one with the black end caps in stock so ordered that instead. I'm not sure which tank I'll use in it but have two or three to choose from. I may just use one with the nautilus bridge in it.

 

[hittman]

HAPPY BIRTHDAY TO @bigbob2322 !!!!

 

[Bigbob2322]

HAPPY BIRTHDAY TO @bigbob2322 !!!!

Thanks buddy!

 

[Poppyclark123]

Hello everyone,
I have the VooPoo DragS Pro!
Was previously using the SmokStick80w, which I nicked off my mum, and got me into vaping!
Used that for 3 or so months, managed to cut right down smoking cigs and only had to change the coil 3 times!
However, I’ve had the VooPoo for about 2 months, and I’m literally having to change the coil every 2-3 days?! Either tasting burnt, or flavour disappears?! I must be doing something wrong surley?!

I prime the coils, always wait 10 mins before first pull.
Also the liquid keeps going brown?! I used seriously soda 70/30 atm?!
Sooo confused and can’t keep spending so much on coils, considering going buying another Smok
The VooPoo is soo good when it’s a fresh coil, but after a few hours it’s jsut crap

Someone please help lol! X

 

[Pigs]

Morning shinies

I'm starting to get a new fave coil. It's a tricore ni80 30*3/38 2.5mm id. And because I can, I took its pic before centering it.

Looks good Ange. Got a link?

 

[Pigs]

Many happy returns @bigbob2322 !!!

 

[Daniel Forsyth]

Happy Happy Birthday @bigbob2322

 

[Daniel Forsyth]

Good Morning Shiny People

 

[Daniel Forsyth]

Hello everyone,
I have the VooPoo DragS Pro!
Was previously using the SmokStick80w, which I nicked off my mum, and got me into vaping!
Used that for 3 or so months, managed to cut right down smoking cigs and only had to change the coil 3 times!
However, I’ve had the VooPoo for about 2 months, and I’m literally having to change the coil every 2-3 days?! Either tasting burnt, or flavour disappears?! I must be doing something wrong surley?!

I prime the coils, always wait 10 mins before first pull.
Also the liquid keeps going brown?! I used seriously soda 70/30 atm?!
Sooo confused and can’t keep spending so much on coils, considering going buying another Smok
The VooPoo is soo good when it’s a fresh coil, but after a few hours it’s jsut crap

Someone please help lol! X

Welcome to the Shiny Thread Poppy
Unfortunately I can't help you myself with your problem but hopefully someone will come by soon and be able give you some advice!
Good Luck

 

[hittman]

Hello everyone,
I have the VooPoo DragS Pro!
Was previously using the SmokStick80w, which I nicked off my mum, and got me into vaping!
Used that for 3 or so months, managed to cut right down smoking cigs and only had to change the coil 3 times!
However, I’ve had the VooPoo for about 2 months, and I’m literally having to change the coil every 2-3 days?! Either tasting burnt, or flavour disappears?! I must be doing something wrong surley?!

I prime the coils, always wait 10 mins before first pull.
Also the liquid keeps going brown?! I used seriously soda 70/30 atm?!
Sooo confused and can’t keep spending so much on coils, considering going buying another Smok
The VooPoo is soo good when it’s a fresh coil, but after a few hours it’s jsut crap

Someone please help lol! X

That does seem extreme. About how many ml of liquid are you running through each coil before you have to change it? A lot of commercial liquids have large amounts of sweetener in them and that can gunk up a coil pretty quickly sometimes. Also, which resistance of coil are you using and are you using it in the recommended wattage range? 70/30 should be ok with the TPP coils. For every day use, I'd probably take a look at a mod with a 510 connection so you can run any tank on it and not be stuck with the included pod.

 

[Bigbob2322]

Hello everyone,
I have the VooPoo DragS Pro!
Was previously using the SmokStick80w, which I nicked off my mum, and got me into vaping!
Used that for 3 or so months, managed to cut right down smoking cigs and only had to change the coil 3 times!
However, I’ve had the VooPoo for about 2 months, and I’m literally having to change the coil every 2-3 days?! Either tasting burnt, or flavour disappears?! I must be doing something wrong surley?!

I prime the coils, always wait 10 mins before first pull.
Also the liquid keeps going brown?! I used seriously soda 70/30 atm?!
Sooo confused and can’t keep spending so much on coils, considering going buying another Smok
The VooPoo is soo good when it’s a fresh coil, but after a few hours it’s jsut crap

Someone please help lol! X

Curious as to what power mode you are using, I would try the smart maybe at a few watts lower than recommended or the RBA at a few below the recommended wattage. There is no way to lock the wattage on the Drag S Pro so pay close attention to your setting when vaping, I have a feeling your wattage is to high.

 

[Poppyclark123]

Welcome to the Shiny Thread Poppy
Unfortunately I can't help you myself with your problem but hopefully someone will come by soon and be able give you some advice!
Good Luck

Ah no worries thank you anyway!!

 

[Poppyclark123]

Curious as to what power mode you are using, I would try the smart maybe at a few watts lower than recommended or the RBA at a few below the recommended wattage. There is no way to lock the wattage on the Drag S Pro so pay close attention to your setting when vaping, I have a feeling your wattage is to high.

Ahhh, yeah tbh I never check the wattage before I take a pull! Have noticed sometimes it’s 65 then others 45 lol! Shall defo check for now on, thank you so much!