Svoemesto Kayfun Mini V3
- Thread starter Bronze
- Start date
- th_trl_thread_readers 0
- Status
Bronze, you said on 02-25, "I see how Captivape does it on their custom rings. I'd go OD = 22.6, ID 20.0 as HB suggested."
I'll go with that. Thanks.
And don't bother writing and asking when they will get more in stock. They never reply.
Bronze, I'd heard that from you guys. So I just stuck 'em on the watch list to check on a couple of times a week. Thanks.
Woita, bummer about the pin and I can understand how TC can help to avoid dry hits with a SS tank or just by running out of juice . I think Q was running TC in his and had no issues, so maybe he might have some pointers.
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
Thx, but I have absolutely no issues running this little atty in TC 
Just wanted to add that (people-are-stupid-and-keep-sucking) aspect to your TC-thoughts. Sorry if I confused you, not a native speaker here
Happy camper (until I crashed it against a wall) with my KM3.
Looks like DHL will bring me a little center pin tomorrow and I hope I'll be back on the KM3 track by tomorrow evening
Just wanted to add that (people-are-stupid-and-keep-sucking) aspect to your TC-thoughts. Sorry if I confused you, not a native speaker here Happy camper (until I crashed it against a wall) with my KM3.
Looks like DHL will bring me a little center pin tomorrow and I hope I'll be back on the KM3 track by tomorrow evening
Sorry, my bad, thought you were having issues with TC..... glad to know it's stable for you!Thx, but I have absolutely no issues running this little atty in TC
Happy camper (until I crashed it against a wall) with my KM3.
Looks like DHL will bring me a little center pin tomorrow and I hope I'll be back on the KM3 track by tomorrow evening
Sent from my SCH-I545 using Tapatalk
I hope this doesnt cause too much controversy, but for those looking for a flow ring or beauty ring for their kayfun mini v3; fastech has a clone that includes one. I'm not going to post the link, but it is the branded sxk one. I'm using an authentic atty, but figured I'd rather pay the $19 for spares than just the 15 for the ring. Will report back its fitment on the authentic v3 mini when i receive it.
Apparently this is the ring
Apparently this is the ring
Thanks! Very helpful. That looks good too!I hope this doesnt cause too much controversy, but for those looking for a flow ring or beauty ring for their kayfun mini v3; fastech has a clone that includes one. I'm not going to post the link, but it is the branded sxk one. I'm using an authentic atty, but figured I'd rather pay the $19 for spares than just the 15 for the ring. Will report back its fitment on the authentic v3 mini when i receive it.
Apparently this is the ring
On another note - the same build has been in for 9 days now... I haven't looked at the wick this whole time, but it tastes glorious and performing perfectly still. Maybe I'll pop it off and snap a pic.
Pretty much exclusively using HHV Serendipity.
Sent from my SM-N920V using Tapatalk
Wow, 9 days without rewicking? You must be vaping other devices as well? I vape on average, maybe 5 to 6 different tanks throughout the day, all with different juices and I would say I rewick once a week on average.
Sent from my SCH-I545 using Tapatalk
This is like a record setting wick (for me)... I'm mostly exclusively using this and I promise I go anywhere between 1-2 tanks a day. Probably average about 4ml/day.
Lol I don't know why it's still so clean... I really don't. This is unheard of. I know I haven't changed it because I traveled through Wed last week and built before I left on sun night. Again - I do have other devices but use this 90% of the time.
I'm scratching my head because even on this mini it usually doesn't last so long.
Looks like it still has a good but of time left in it still too. Weird. I did run a tank of "Prime 15" (Halo) through UT yesterday.
Sent from my SM-N920V using Tapatalk
Last edited:
Oh and I'm between 12 and 13 watts MTL.
Still scratching my head. I swear there were no rebuilds in there. Not a fast one that I forgot about or anything.
Weird. Amazing really.
There might have been 1 or two times where I almost ran it dry and almost burnt the wick/cotton (forgot to open juice both times), but I caught it just in time.
Is it possible the coil got hot enough to get some gunk off without burning the cotton when that happened?
Sent from my SM-N920V using Tapatalk
Still scratching my head. I swear there were no rebuilds in there. Not a fast one that I forgot about or anything.
Weird. Amazing really.
There might have been 1 or two times where I almost ran it dry and almost burnt the wick/cotton (forgot to open juice both times), but I caught it just in time.
Is it possible the coil got hot enough to get some gunk off without burning the cotton when that happened?
Sent from my SM-N920V using Tapatalk
Last edited:
I have used the same cotton wick in my Gems for over 8 refills. I guess it all depends on your liquid.
Even if it is about accessories, I suggest avoid hinting at clones on this thread PLEASE @Wewu et all. It is beyond the realm of discussions here - and a dishonorable act/item anyway.
Soon some of the guys on this thread (who are also on other authentic threads) will receive their counterfeits (some already have) and start preaching their delusion, advises on builds, suggestion tips etc. Intentionally oblivious to the fact that what they have has no bearing on what we have.
Replicas are inferior products. Even if it is not about their material/s or production quality, the concept itself is. Thus, whatever their users talk about - will never be in parity with what our experiences are. So their point/s would be moot and unwarranted.
_______________________________________________
Ps.: Moderator/s pls don't take this post down. It is a genuine reminder to all to talk only about SvoeMesto Kayfun Mini V3 here. Thus this post is "on topic", else soon this thread will be what it was not intended to be.
Soon some of the guys on this thread (who are also on other authentic threads) will receive their counterfeits (some already have) and start preaching their delusion, advises on builds, suggestion tips etc. Intentionally oblivious to the fact that what they have has no bearing on what we have.
Replicas are inferior products. Even if it is not about their material/s or production quality, the concept itself is. Thus, whatever their users talk about - will never be in parity with what our experiences are. So their point/s would be moot and unwarranted.
_______________________________________________
Ps.: Moderator/s pls don't take this post down. It is a genuine reminder to all to talk only about SvoeMesto Kayfun Mini V3 here. Thus this post is "on topic", else soon this thread will be what it was not intended to be.
Point taken qorax, will not happen again.
@stanleybb50 my wicks look like that after only one tank. My last wick in my mini v3 lasted only 4 days and I was getting burnt flavor. Probably because of the coil gunker juices I use though.
@stanleybb50 my wicks look like that after only one tank. My last wick in my mini v3 lasted only 4 days and I was getting burnt flavor. Probably because of the coil gunker juices I use though.
That is amazing.... I also notice this on some of my particular builds . I pretty much vape (like you) a little over 4 mls a day, split between, on average, about 5 different tanks, all containing about 2mls each. So every 2 days I have to refill all my tanks and by the end of the week I usually rewick. alot of the time I'm busy or whatever and extend rewicking a day or two beyond, but if I had to figure, on average, I would say every 10ml I rewick. Sometimes when rewicking the wick does need a clean, but sometimes it's clean as can be...... I tend to believe if the wick job is absolutely perfect, right down to the last trand, and the actual wick used was a perfect piece, meaning all the fibers were absolutely horizontal, then you get much much more time. Now you might not feel the difference between a very good wick job and an absolute perfect wick job, but it will last alot longer. Yes juice has alot to do with it, but the absolute perfection wick job will make a big difference. So what I believe you have in your kayfun right now is an APW (absolute perfection wick). When you do rewick, really try to feel it , so you can try to replicate.
Sent from my SCH-I545 using Tapatalk
- Status
