Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

[Innocuous]

Speaking of cheap.. I guess we should thank Imeo for the Ithaka, and Rainbow Heaven for making the Hercules.

My Herc gets one more day, (an off day), of attempting to make it work dual - and then I see how much of it I can mine for maintaining and improving my term-c.

It worked great on a single coil for a day at work - but I've fought it all night to rig the 2nd coil.. Nearly chernobyled a CGR and my K100.

 

[st0nedpenguin]

I didn't find it any more difficult to stick a dual in than it was to stick a single in.

 

[dwcraig1]

The design of Ithaka(clones) is sound and quite user friendly, help with the device is always available

 

[Jazzi Mike]

I have not been able to wrap a DC coil in my Hercules either, even when using ready wire from mad vapes. I specifically bought 3 ohm ready wire to build my Ithaca DC, but it is a b----.

 

[ingo]

gentlemen, i have bought a tobeco ody clone. i should've found this thread earlier. is this atty interchangeable with terminator parts? i guess that would be my best shot if i still want to make this stuff work. any tips would be very much appreciated. thank you

 

[JeremyR]

There are two tobeco's is it SS or chrome plated? The juice valve/air tube is smaller.

 

[ingo]

the ss one, took some pics for you. thanks!

 

[Jazzi Mike]

Have any of you guys tried your Terminator with SG-1 kit from fusions mods? I have one that I have never gotten to use because I havent been able to build a solid genesis. My Ithaka is going wonderfully, so much flavor! I ordered a Terminator to try to get some use out of my SG1 kit.

On the website, it says the terminator will work, but there is some kit of difficulty with the airflow? Any ideas?

 

[chadsmo]

Have any of you guys tried your Terminator with SG-1 kit from fusions mods? I have one that I have never gotten to use because I havent been able to build a solid genesis. My Ithaka is going wonderfully, so much flavor! I ordered a Terminator to try to get some use out of my SG1 kit.

On the website, it says the terminator will work, but there is some kit of difficulty with the airflow? Any ideas?

I actually just got my SG1 kit two days ago. It actually opens up the draw just a bit I think and makes it a tad more airy. At least on my 13 that has the four large vent holes on the bottom cap. That's the thing though , you have to be ok with drawing your air past the battery. I don't mind myself.

The only thing that's bugging me a tiny bit is that I dropped my mod once and just barely bent the terminator 510 area a hair. So mine doesn't sit perfect with the SG1, I need to try to bend it back. It's only off by less than a mm so it's tolerable for now.

Also for what it's worth I polished my term to match my mod , I think that's 1100 grit or so to get it really close.

 

[Jazzi Mike]

Thnks dude! I am totally stoked to get my Term C

 

[Lakers777]

why would my vamo show .1 as the ohms after I built my term? I rebuilt it twice, same thing.. if it was a short wouldn't it read 9.9? brand new Term-C sitting in the vape drawer with zero successful builds on it to date =/.. anybody wanna buy one? lol

 

[Technonut]

Totally but funny as hell....


A PBusardo Video - The Legal Vape 4000 - YouTube

 

[Scope666]

Totally but funny as hell....


A PBusardo Video - The Legal Vape 4000 - YouTube

Best video Phil has ever done ... I was laughing my ... off!!!!

 

[crss]

Totally but funny as hell....


A PBusardo Video - The Legal Vape 4000 - YouTube

Go to love those fog machines. Probably not too funny in some states were it is sad but true. I am waiting for Fasttech to restock it!

 

[Jazzi Mike]

why would my vamo show .1 as the ohms after I built my term? I rebuilt it twice, same thing.. if it was a short wouldn't it read 9.9? brand new Term-C sitting in the vape drawer with zero successful builds on it to date =/.. anybody wanna buy one? lol

Are you sure you screwed the atomizer base into the base of the Terminator? Your positive post should come down more. It sounds like a simple fix. Don't fret. You should just have to screw down the atomizer a bit more.

PS your Vamo will read "short" rather than 9.9 ohms.

 

[Jazzi Mike]

This Euforia tank is amazing. It looks super sweet on my SmokTech pipe mod and was easier to rebuild than my Hercules!

 

[dwcraig1]

why would my vamo show .1 as the ohms after I built my term? I rebuilt it twice, same thing.. if it was a short wouldn't it read 9.9? brand new Term-C sitting in the vape drawer with zero successful builds on it to date =/.. anybody wanna buy one? lol

9.9 is open (no connection), .1 is a short unless you built a 0.1 ohm coil

 

[chadsmo]

This Euforia tank is amazing. It looks super sweet on my SmokTech pipe mod and was easier to rebuild than my Hercules!

Yeah I've only had my Euforia for a few days but I love it. I really like the draw on it and building it wasn't any harder than a term etc. It actually seems to less finicky than the term. I got some ribbon the same day I'm running a 1.3 ohm of .4 ribbon it and it's a fantastic vape.

 

[chadsmo]

On my Ba Gua which I just got as well.

 

[pizza2me]

OK folks. I have a term-c v2 on the way. Going to be doing a lot of reading in this thread while I wait. I've got gennys down pretty good. Ready for something new to play with. Did I make a good choice?

While I'm reading could somebody post a link or two to a couple of the better videos on these?