Tootle Puffers, Redux (The Sequel)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
- Status
Yes, and, you know you love us!!!I do too...is this still a vaping thread or is it a chat thread ?
not sure if I would have figured out how to remove that panel, but I seen it in a review
then seen some reviewers that DIDN'T know it came off or how
and said as much (wonder why eleaf did that ?)
they had the extra panels, but only one on the mod...
I like the (4) positive mag legs so it doesn't slip-n-slid around (well thought)
the whole unit is well built and with smart design (and cheap)
Joyetech and eLeaf are making some nice devices lately..not sure if I would have figured out how to remove that panel, but I seen it in a review
then seen some reviewers that DIDN'T know it came off or how
and said as much (wonder why eleaf did that ?)
they had the extra panels, but only one on the mod...
I like the (4) positive mag legs so it doesn't slip-n-slid around (well thought)
the whole unit is well built and with smart design (and cheap)
Hello Gang!
Busy day today and I came home to a lot of reading! So before I go again I'll leave ya with this for now.
The mother-in-law arrives home from shopping to find her son-in-law, Paddy, in a steaming rage and hurriedly packing his suitcase.
"What happened Paddy?" she asks anxiously.
"What happened? I'll tell you what happened! I sent an email to my wife telling her I was coming home today from my fishing trip. I get home ... and guess what I found? Your daughter, my wife, Jean, naked with Joe Murphy in our marital bed! This is unforgivable! The end of our marriage. I'm done. I'm leaving forever!"
"Ah now, calm down, calm down Paddy!" says his mother-in-law. "There Is something very odd going on here. Jean would never do such a thing! There must be a simple explanation. I'll go speak to her immediately and find out what happened."
Moments later, the mother-in-law comes back with a big smile.
"Paddy, there I told you there must be a simple explanation...............
She never got your email!"
Busy day today and I came home to a lot of reading! So before I go again I'll leave ya with this for now.
The mother-in-law arrives home from shopping to find her son-in-law, Paddy, in a steaming rage and hurriedly packing his suitcase.
"What happened Paddy?" she asks anxiously.
"What happened? I'll tell you what happened! I sent an email to my wife telling her I was coming home today from my fishing trip. I get home ... and guess what I found? Your daughter, my wife, Jean, naked with Joe Murphy in our marital bed! This is unforgivable! The end of our marriage. I'm done. I'm leaving forever!"
"Ah now, calm down, calm down Paddy!" says his mother-in-law. "There Is something very odd going on here. Jean would never do such a thing! There must be a simple explanation. I'll go speak to her immediately and find out what happened."
Moments later, the mother-in-law comes back with a big smile.
"Paddy, there I told you there must be a simple explanation...............
She never got your email!"
@classwife Obligatory vape question... 
I'm still rockin' the Smok GBC/RBC bcc tanks (same class as Aro/Tumbler), but coil hunting is getting more challenging as my gear becomes more...vintage.
What other coils have people successfully used? I was reading an older thread about TS3 coils working, but I'd like solid data from my Tootle friends.
Thanks.
Jay
I'm still rockin' the Smok GBC/RBC bcc tanks (same class as Aro/Tumbler), but coil hunting is getting more challenging as my gear becomes more...vintage.
What other coils have people successfully used? I was reading an older thread about TS3 coils working, but I'd like solid data from my Tootle friends.
Thanks.
Jay
Thankees! I was kind of hoping there was a button top version of the HG2 but when I couldn't find one I figured maybe batteries didn't work that way. I guess I wasn't looking in the right place.
Off to order the shiny!
Only in Thailand - a carton of egg - not eggs, just egg; as in one egg.
It's actually a soft-boiled egg and comes with a small bag of fish sauce. So, if you're hungry for a soft-boiled egg, crack it open pour it back into the cup add fish sauce to taste and eat.
Alternately, you could add it to a bowl of jok. Jok, is kind of like a rice porridge, usually with pork meatballs and liver - garnished with sliced ginger and chopped green onions. Some folks like to add an egg to it as well. They drop a raw egg into the hot bowl of porridge and by the time you're ready to eat it's soft-boiled.
It's actually a soft-boiled egg and comes with a small bag of fish sauce. So, if you're hungry for a soft-boiled egg, crack it open pour it back into the cup add fish sauce to taste and eat.
Alternately, you could add it to a bowl of jok. Jok, is kind of like a rice porridge, usually with pork meatballs and liver - garnished with sliced ginger and chopped green onions. Some folks like to add an egg to it as well. They drop a raw egg into the hot bowl of porridge and by the time you're ready to eat it's soft-boiled.
Joyetech and eLeaf are making some nice devices lately..
they SURE are and throw in Wismec and they are taking the e-Cig industry by storm (clouds of vapor) (pun intended)
with the Presa models, add their collaboration with Vape Forward (Stout-Lite-Classic)
the iStick phenomenon (iStick 20 went gang-busters, had trouble, THEY Smartly/Qwickly countered with istick 30)
now VTC is all the talk (everybody seems to love it)
and they are still swinging with the new Cubiod
will Innokin every re-gain ground - I know MY Garage will be full before they do...
jus sayin`
...it has been some ride
Last edited:
A quick write up of my trials and tribulations with the Cubis tank.
Firstly I had read of some issues some other Aussies were having with major flooding so when it arrived I followed all their advice and it was a disaster, I had loaded the 1.5ohm coil, filled below the max fill line made sure the airflow was open when I closed the lid to ease internal pressure and covered the driptip to keep even pressure in the coil and chimney and generally adopted the most bizzare routine know to exist.
Primed with 3 drops waited a couple of mins and then fired it up. Immediately the coil plus chimney flooded with eliquid and I was almost drinking it. You know what I mean. Arrrrrrg, dismantled, cleaned up and tried again.....same thing. And just in case I hadn't learnt anything in the other two attempts I did it a third time.
That was it. Cleaned it mopped the floor, sprayed down the benchtop with the hose and swore off it.
Let me tell you that I was not a happy camper.
Yesterday the additional coils came and I just rolled my eyes, but then one of the guys mentioned that he recoiled the factory coil and I though ok I had the flooded one.......so this morning I pulled it apart. The wicking material was almost bone dry. A bit surprising considering the flooding. Hmmm I thought, maybe the factory coil was a dud. It has been known to happen so I took a brand new coil 1.5ohm from the blister pack and loaded it. I did not prime it or do anything weird I just screwed it to the chimney filled the tank, waited 2 mins, changed my driptip and vaped.
I have to say that it vapes very well, the ramp up of the coil is slowish almost like a dual coil so I do need to fire a bit before I vape but it does work. I am a bit cautious of the initial trouble but I am hoping that the enclosed coils were just wicked or packed incorrectly and that the blister pack coils are fine.
Firstly I had read of some issues some other Aussies were having with major flooding so when it arrived I followed all their advice and it was a disaster, I had loaded the 1.5ohm coil, filled below the max fill line made sure the airflow was open when I closed the lid to ease internal pressure and covered the driptip to keep even pressure in the coil and chimney and generally adopted the most bizzare routine know to exist.
Primed with 3 drops waited a couple of mins and then fired it up. Immediately the coil plus chimney flooded with eliquid and I was almost drinking it. You know what I mean. Arrrrrrg, dismantled, cleaned up and tried again.....same thing. And just in case I hadn't learnt anything in the other two attempts I did it a third time.
That was it. Cleaned it mopped the floor, sprayed down the benchtop with the hose and swore off it.
Let me tell you that I was not a happy camper.
Yesterday the additional coils came and I just rolled my eyes, but then one of the guys mentioned that he recoiled the factory coil and I though ok I had the flooded one.......so this morning I pulled it apart. The wicking material was almost bone dry. A bit surprising considering the flooding. Hmmm I thought, maybe the factory coil was a dud. It has been known to happen so I took a brand new coil 1.5ohm from the blister pack and loaded it. I did not prime it or do anything weird I just screwed it to the chimney filled the tank, waited 2 mins, changed my driptip and vaped.
I have to say that it vapes very well, the ramp up of the coil is slowish almost like a dual coil so I do need to fire a bit before I vape but it does work. I am a bit cautious of the initial trouble but I am hoping that the enclosed coils were just wicked or packed incorrectly and that the blister pack coils are fine.
wow
ya'd NEVER catch me using one of those flimsy things for these high powered batteries...
sometimes trying to save money, well it is, well.................
if one can't get the proper gear, maybe one shouldn't indulge in said operation... JMO
Last edited:
Good thing I decided to go with some Samsung 25R button tops then.wow
ya'd NEVER catch me using one of those flimsy things
for these high powered batteries
sometimes trying to save money, well it is, well.................
if one can't get the proper gear, maybe one shouldn't indulge in said operation... JMO
I thought about it, and while I hate the idea of having to get "special" batteries for the Provari, since my Cloupor doesn't specify which 18650s it prefers I'm assuming I can use the button tops in it, too. *shrugs*
I use both flat and button tops in my cloupor mini+ if that helps.
the way it is, for those type that you are just fitting a battery
in between two copper contacts (spaced) - it's all about SIZE
if your battery is actually resting on the switch there is a need to
know if the switch can REACH a flat top or needs the button top
so YOU need to know - this is where I bail out (end of my knowledge limit)
Ohhh, and those sweet 25R5 will make Vape that will ~~~
♫ ♪ * Blow Your Face Out* ♫ ♪
Last edited:
- Status
Similar threads
