BTW are these the BVC coils yall are talking about? http://www.litecigusa.net/VapeOnly-BVC-Replacement-Atomizer-Heads-p/vapeonly-bvc-coil.htm
Tootle Puffers, Redux (The Sequel)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
- Status
Not so good. Just getting ready to go in to work.
go Blue Jays 
Go Hawks 
I have a few Davide's in rotation as well, and like Amoret took out the "extra" pieces to use the Kanger type single coils. They, like my PT and PT2s, have the AFC base, so I can adjust air flow to my preferences. Makes for a nice vape. And being able to feed them all with only one type of head is a definite plus in my book.
I have a few Davide's in rotation as well, and like Amoret took out the "extra" pieces to use the Kanger type single coils. They, like my PT and PT2s, have the AFC base, so I can adjust air flow to my preferences. Makes for a nice vape. And being able to feed them all with only one type of head is a definite plus in my book.
Just got back from the local B&M on my weekly 'screw with the new employees' visit. So new guy saunters up to me as I'm looking at the ego batteries and says " what you want is a 150W box with a something-Sub-ohm tank".
I ask how he knows what I want? He says "cus its da best".
I ask " da best at what?"
* confused look ensues*
He says "because it's powerful"
I says "what do you mean powerful?"
*confused look continues*
At this point he babbled some nonsense about clouds or something
I pull this out of my pocket
And take a nice leisurely puff.
The confused look changes to dumbfounded.
he asks "what is that?.."
I say "it's a VV mod, the next big thing!"
At this point all the other employees burst into laughter.
After that we put some 18 mg juice in a taster tank of the same type he was trying to sell me and let him try his setup for noobs. It did not end well.
I has fun
I ask how he knows what I want? He says "cus its da best".
I ask " da best at what?"
* confused look ensues*
He says "because it's powerful"
I says "what do you mean powerful?"
*confused look continues*
At this point he babbled some nonsense about clouds or something
I pull this out of my pocket
And take a nice leisurely puff.
The confused look changes to dumbfounded.
he asks "what is that?.."
I say "it's a VV mod, the next big thing!"
At this point all the other employees burst into laughter.
After that we put some 18 mg juice in a taster tank of the same type he was trying to sell me and let him try his setup for noobs. It did not end well.
I has fun
Just got back from the local B&M on my weekly 'screw with the new employees' visit. So new guy saunters up to me as I'm looking at the ego batteries and says " what you want is a 150W box with a something-Sub-ohm tank".
I ask how he knows what I want? He says "cus its da best".
I ask " da best at what?"
* confused look ensues*
He says "because it's powerful"
I says "what do you mean powerful?"
*confused look continues*
At this point he babbled some nonsense about clouds or something
I pull this out of my pocket
View attachment 497831
And take a nice leisurely puff.
The confused look changes to dumbfounded.
he asks "what is that?.."
I say "it's a VV mod, the next big thing!"
At this point all the other employees burst into laughter.
After that we put some 18 mg juice in a taster tank of the same type he was trying to sell me and let him try his setup for noobs. It did not end well.
I has fun
Isnt that considered hunting in a baited field?
They look the same and the vaping wattage ranges are the old ones so I would make a leap of judgement and say yes. But I would check.
Go Hawks
I have a few Davide's in rotation as well, and like Amoret took out the "extra" pieces to use the Kanger type single coils. They, like my PT and PT2s, have the AFC base, so I can adjust air flow to my preferences. Makes for a nice vape. And being able to feed them all with only one type of head is a definite plus in my book.
I am with you on that. I want all my various tanks to work with the one supply of coils. It was a huge put off when I saw pretty tanks that took different coils. I need to have a stash of spares and it's easier to keep it to one type. In my case it was those aspire coils and even my new Egrip with work with them.
Same! Really want to get a hold of that Cerotank when I get some money..
Same! Really want to get a hold of that Cerotank when I get some money..
I know how much Kat luvz them but I couldn't find them over here.
I just completed my order for them at HG so I am happy and have enough to to last both hubby and I for a very.......very.....very long time. 
When we were rationing I wouldn't let him vape them hehe
When we were rationing I wouldn't let him vape them hehe
Hahaha... I read this while I was out and about and thought I'd give it a try. You're right, it's fun...Just got back from the local B&M on my weekly 'screw with the new employees' visit. So new guy saunters up to me as I'm looking at the ego batteries and says " what you want is a 150W box with a something-Sub-ohm tank".
I ask how he knows what I want? He says "cus its da best".
I ask " da best at what?"
* confused look ensues*
He says "because it's powerful"
I says "what do you mean powerful?"
*confused look continues*
At this point he babbled some nonsense about clouds or something
I pull this out of my pocket
View attachment 497831
And take a nice leisurely puff.
The confused look changes to dumbfounded.
he asks "what is that?.."
I say "it's a VV mod, the next big thing!"
At this point all the other employees burst into laughter.
After that we put some 18 mg juice in a taster tank of the same type he was trying to sell me and let him try his setup for noobs. It did not end well.
I has fun
I went back to my first B&M and asked if they had any Stingray Bridgeless 510 dripping atomizers left, I wanted to taste my DIY juices with it (I got one at this store last year). He had no idea what I was talking about so I asked him if they had any cheap single coil dippers. He tried selling me this dual coil Daringer knock-off for 45 bucks so I told him I already had an authentic.
What a rip-off this place had become, Evic VT $129.99, iTaste 40 watt TC $99.99, Coolfire $99.99...
He asked me what I was currently using so I showed him Nickle Plated Brass HOH Custom with a Kabuki and he was clueless... Guess I won't be going there again...
As DingerCPA pointed out, a Aerotank AFC Base will work on the T3's, Though if your using a small ego diameter battery it may look funny. I used to use them on Smok Trophy V2's as-well..
Nope, not very pretty on a stick mod. Tolerable on a box mod or a tube mod
I'm going to have to go - NEGATIVE. The kanger/evod heads "might" work. Just realized that those are even limited. I had ONE "tall chimney" coil that would fit in the STN. They are all o.k. in the STM. I think the Aspires are too wide.
Three different chimneys. ONLY the one of the left worked. I had some short chimney heads from when I got a 10-pack of EVODs last year from Fasttech. They worked o.k. in the Nano. I think the STM has a slightly larger diameter, and all of these worked o.k.
Because of our no nic regs we have very few B&M but they are starting to appear. I went into a new one that opened up in the next suburb. It was in the side of a cafe and was really nicely laid out. Their range was limited to aspire everything some really dodgy looking mechs. Being the sweet person I am (support local) I bought a nautilus SS tank (gasp at the price) While we were there I was vaping my bright blue billet box and I had a small crowd oohing and ahhing over it. Then I opened my vape case and I had a poldiac a provari and my tanks. They had never seen this type of gear. They were young and enthusiastic so I played nice.
Last edited:
I can't see you imagesNope, not very pretty on a stick mod. Tolerable on a box mod or a tube mod
I'm going to have to go - NEGATIVE. The kanger/evod heads "might" work. Just realized that those are even limited. I had ONE "tall chimney" coil that would fit in the STN. They are all o.k. in the STM. I think the Aspires are too wide.
Three different chimneys. ONLY the one of the left worked. I had some short chimney heads from when I got a 10-pack of EVODs last year from Fasttech. They worked o.k. in the Nano. I think the STM has a slightly larger diameter, and all of these worked o.k.
- Status
Similar threads
