Tootle Puffers, Redux (The Sequel)

[Krisma]

Out of curiosity: I'm a bit concerned about my husband and if things get hard for him to get what he needs for his vaping. He's even more Tootle-Puffy than many of the Tootle Puffers in here, only vaping maybe 1 ml. a day (if that) and he uses the old fashioned Joye and Smok eGos and carto tanks. But he does vape about 11mg juice. I have not been able to replicate the juice he likes (Double Mint from MVS), unfortunately. Soooo....I was wondering. Will 0 nicotine juice be banned too? If I got a mess of his juice in 0 nic and stored it...couldn't I add an appropriate amount of my 60mg nicotine juice to it to make 11mg? (whatever that equation would be...maybe someone here can help me out with that). I have a crate FULL of cartomizers...mostly 2.1 and 3 ohm, but I know he likes 1.7, but heck...he could get used to things if he had to, right? I even have some lightly used Twists so he could adjust the voltage to accommodate. I also have a huge collection of eGos I've been buying on clearance for awhile. Most are lightly or barely used. He can make a cartomizer last a month, easy...haha! That would get him through quite awhile, I'm thinking. What do you think? He's talking (bitterly) that at least Medicare ought to give him patches if they push this anti-vaping through. He's very unhappy right now.

Have a look at the DIY eliquid thread and see if anyone there knows which concentrate is used for MVS double mint. It would be better/cheaper/fresher to get that than the premixed 0nic IMO. You can absolutely add some of yours to 0mg eliquid to get to the right level for him. There are gazillions of calculators that will help you work it out.

 

[gt_1955]

Out of curiosity: I'm a bit concerned about my husband and if things get hard for him to get what he needs for his vaping. He's even more Tootle-Puffy than many of the Tootle Puffers in here, only vaping maybe 1 ml. a day (if that) and he uses the old fashioned Joye and Smok eGos and carto tanks. But he does vape about 11mg juice. I have not been able to replicate the juice he likes (Double Mint from MVS), unfortunately. Soooo....I was wondering. Will 0 nicotine juice be banned too? If I got a mess of his juice in 0 nic and stored it...couldn't I add an appropriate amount of my 60mg nicotine juice to it to make 11mg? (whatever that equation would be...maybe someone here can help me out with that). I have a crate FULL of cartomizers...mostly 2.1 and 3 ohm, but I know he likes 1.7, but heck...he could get used to things if he had to, right? I even have some lightly used Twists so he could adjust the voltage to accommodate. I also have a huge collection of eGos I've been buying on clearance for awhile. Most are lightly or barely used. He can make a cartomizer last a month, easy...haha! That would get him through quite awhile, I'm thinking. What do you think? He's talking (bitterly) that at least Medicare ought to give him patches if they push this anti-vaping through. He's very unhappy right now.

So, using your figures but for 100ml of juice:

Vol (start) = 100
End (mg) = 11
Start (mg) = 0
Nic (mg) = 60

Vol (add) = 100 x (11 - 0)/(60 - 11)
=1100/49
= 22.45 ml

Double check: 22.45ml @ 60mg/ml = 1347mg nic
122.45ml @ 11mg/ml = 1346.95mg nic

Woo hoo, it checks

 

[nebulis]

I got 316L not sure what is the best. It's my first go at it.

Our zivipf offers V4A and V2A. But if you click on one of the gauge variations, one can see the composition.
Too sleepy now for research ... basically, I am happy that we can use Kanthal made from Kanthal by Kanthal instead of Readymade with Nores-legs made from ... whoknowsexactlywhat

 

[LJFinFLA]

Pretty accurate for spaced coils, not so much with contact coils (although the SS was spot on)


Horrendous postal charges for anything posted from America to anywhere else in the world though

True but at least it puts you in the ballpark

 

[Vapez]

 

[MikeyConti]

Just got my White STM today to use on my CF4, put a 1.5ohm coil in it to test it out with some 3mg nic juice before I try it with my 18mg EDV.. Seems to work good at my usual range of 8-10Ws or 3-4V using the 2 second biggest airholes for MTL.. Still wanna try the Aspire coils in it.. My CF4 is the Black model and I thought the White STM would go really good with it alone, but looks like I may need to cover the middle portion (The Buttons & Screen) with a White J Wrap as planned.. Works great together though

 

[MikeyConti]

Still have my STM V1 SS, just need to replace some o-rings... Great little tanks!

 

[LJFinFLA]

Still have my STM V1 SS, just need to replace some o-rings... Great little tanks!

Yea I like them as well. I have one of each size, Plus, Mini, Nano. They all work well. I like the Plus for the 7ml capacity. I use it in my temp mods with nickel and Ti builds. I seen sweet vapes has the Plus in black which I think is calling me!!!

 

[MikeyConti]

Yea I like them as well. I have one of each size, Plus, Mini, Nano. They all work well. I like the Plus for the 7ml capacity. I use it in my temp mods with nickel and Ti builds. I seen sweet vapes has the Plus in black which I think is calling me!!!

I really want to get that one too!!! Comes with Ni200 coil & Nichrome Coil.. Nice!

Edit* Actually was going to order that instead of another Mini, but I was a few dollars shy at the time lol

 

[pufZeppelin]

Out of curiosity: Soooo....I was wondering. Will 0 nicotine juice be banned too? If I got a mess of his juice in 0 nic and stored it...couldn't I add an appropriate amount of my 60mg nicotine juice to it to make 11mg? (whatever that equation would be...maybe someone here can help me out with that). he could get used to things if he had to, right? I even have some lightly used Twists so he could adjust the voltage to accommodate. I also have a huge collection of eGos I've been buying on clearance for awhile. That would get him through quite awhile, I'm thinking. What do you think?

keep in mind, batteries deplete over time whether used or not

here is a site maybe you’ve not seen
- http://www.breaktru.com/
scroll down to bottom and clk on “ eJuice me up “

you have to play around and leaarn the easy to use software,
then if needed ask questions…


other handy sites
- http://www.steam-engine.org/coil.asp
- http://www.rapidtables.com/calc/electric/watt-volt-amp-calculator.htm

 

[pufZeppelin]

Just got my White STM today to use on my CF4,
My CF4 is the Black model and I thought the White STM would go really good with it alone, but looks like I may need to cover the middle portion (The Buttons & Screen) with a White J Wrap as planned.. Works great together though

without pictures,

people can call you a liar

 

[MikeyConti]

without pictures,

people can call you a liar

As I said "Thought" would look good lol Well finally made an Imgur account haha

 

[TrollDragon]

As I said "Thought" would look good lol Well finally made an Imgur account haha

Looks good!
I like the Sigelei peeking around the corner and the VTR sulking in the back...

 

[MikeyConti]

Looks good!
I like the Sigelei peeking around the corner and the VTR sulking in the back...

lol Sigelei I use most!! Poor VTR has just been collecting dust lately I gotta wipe down everything on this dam desk!! lol

 

[TrollDragon]

TD, my last order from FT I had to use Singapore Post. But it did get here in 16 days.

Wow Linda, I didn't know they killed ePacket for you guys too, that really bites! 16 days out of Singapore is not too bad though.

 

[3mg Meniere]

lol Sigelei I use most!! Poor VTR has just been collecting dust lately I gotta wipe down everything on this dam desk!! lol

VTR is getting jealous of the new babies. You otta be careful, halloween is coming, you know.

 

[pufZeppelin]

As I said "Thought" would look good lol Well finally made an Imgur account haha

hey now, that looks fine

( just paint the cool fire IV plate white, and you're good to go )

 

[MikeyConti]

VTR is getting jealous of the new babies. You otta be careful, halloween is coming, you know.

Yes it is! But the VTR is one of the most Solid box mods Iv ever had.. It will be back in rotation soon!

 

[MikeyConti]

hey now, that looks fine

( just paint the cool fire IV plate white, and you're good to go )

Ima try something to balance it out, really bought this setup for work and maybe when im out runnin around so its not exactly meant to be a show piece by any chance!

 

[Eric Auer]

Todays Tootle: Perseus Genesis on a Chi-You, all 30mm.

Eric