Tootle Puffers, Redux (The Sequel)

[TrollDragon]

For all those who are unhappy with the Cloupor Mini+, please feel free to send it my way. It will fit in perfectly with my WeeLeaf 20W, sigelei Mini, KBox and ipv D2's...

What do you want for $29 really? There is always the Koopor Mini 60W that is $29 as well, supports SS in its firmware and has an even jankier build quality.

Now the eVic VTC mini for $29 that has has very nice aesthetics, a gorgeous screen, Power & Bypass mode that function perfectly and a TC feature that might work properly or most likely will not.

These devices are all made as an inexpensive device to support TC coil heads that every manufacturer has multiple SKU's for and are very eager to sell. The Ni 200 coil heads for most devices sell around $6 a piece which is much nicer than the Kanthal $1.50 a piece version. This is just a simple setup and wire change in the coiling machines that crank out 200K coils a month and more.

If you want to seriously play in the TC game then any of the numerous DNA200 devices will more than meet your every expectation, but they can't be had for $29...

 

[TrollDragon]

I remember on the Dean Martin show they where smoking and drinking!

Dean Martin roasts were the best, everyone smoked and were all half liquored as well.

 

[TrollDragon]

Speaking of.......Where can I get a "Kit" for all the seals for a Nautilus (Regular size)?

Eric

The only place I have seen those parts is from Aspire themselves.
http://online.aspirecig.com/aspire-nautilus-accessories-p-74.html

 

[LJFinFLA]

Happy Halloween All
They're coming for us!!!!

 

[Robert Cromwell]

For all those who are unhappy with the Cloupor Mini+, please feel free to send it my way. It will fit in perfectly with my WeeLeaf 20W, Sigelei Mini, KBox and iPV D2's...

What do you want for $29 really? There is always the Koopor Mini 60W that is $29 as well, supports SS in its firmware and has an even jankier build quality.

Now the eVic VTC mini for $29 that has has very nice aesthetics, a gorgeous screen, Power & Bypass mode that function perfectly and a TC feature that might work properly or most likely will not.

These devices are all made as an inexpensive device to support TC coil heads that every manufacturer has multiple SKU's for and are very eager to sell. The Ni 200 coil heads for most devices sell around $6 a piece which is much nicer than the Kanthal $1.50 a piece version. This is just a simple setup and wire change in the coiling machines that crank out 200K coils a month and more.

If you want to seriously play in the TC game then any of the numerous DNA200 devices will more than meet your every expectation, but they can't be had for $29...

If the FDA does not ban them we will have DNA 200 equivelent devices for $50 in a year. + plug on lipo pack. I think that is how the high wattage devices that need 3 cells will be going.

 

[LJFinFLA]

If the FDA does not ban them we will have DNA 200 equivelent devices for $50 in a year. + plug on lipo pack. I think that is how the high wattage devices that need 3 cells will be going.

There is this one coming out that takes 3 18650's

 

[Butch]

Happy Halloween All
They're coming for us!!!!

Call out sheriff Joe............he'll lock it up in a tent.........

 

[TrollDragon]

If the FDA does not ban them we will have DNA 200 equivelent devices for $50 in a year. + plug on lipo pack. I think that is how the high wattage devices that need 3 cells will be going.

If they manage to find a way to put a temp sensor in the coil head or deck area like they were working on, then it will change up the industry completely. They really need to move away from the ancient 510 connector.

 

[TrollDragon]

There is this one coming out that takes 3 18650's

Nice box!
I still think lipo packs are the way to go though.

 

[LJFinFLA]

Nice box!
I still think lipo packs are the way to go though.

I think this is still in it's infancy. If they develop Lipo's that are smaller and with better Watt Hours and are easier to swap out I think that would be great. I like that you can just change the batteries and that you get longer vape time. I'm really waiting for Innokin to come out with their mod that is supposed to TC Kanthal. That will be a game changer for sure!

 

[Robert Cromwell]

There is this one coming out that takes 3 18650's

Yep saw Busardo's review on it. I still think more movement to plug on lipo packs. More money for the manufacturers. If they will just make a standard for the pack interface....

 

[LJFinFLA]

Yep saw Busardo's review on it. I still think more movement to plug on lipo packs. More money for the manufacturers. If they will just make a standard for the pack interface....

Yes like the Hotcig one that has the batteries like the Desrupter.

 

[David Wolf]

@Krisma ? My two Istick 30s have a beautiful finish. I have silicon sleeves on them though cause they're slippery. My Istick 40w has a decent finish but not shiny like the 30s, still need to pick up a sleeve for it. Are yours getting scratched up? Try the sleeves

 

[LJFinFLA]

@Krisma ? My two Istick 30s have a beautiful finish. I have silicon sleeves on them though cause they're slippery. My Istick 40w has a decent finish but not shiny like the 30s, still need to pick up a sleeve for it. Are yours getting scratched up? Try the sleeves

The only draw back to sleeves is if you get ejuice between the sleeve and the mod. Could damage internals.

 

[fourthrok]

Something I found useful for vaping.
Little stackable boxes from Wally world.
2.27 each for a 3X5 one. It holds about 16 or so 15 ml bottles of flavorings or juice.
They open easy no pulling a tupperware type lid off and shaking everything around when the lid pops loose.
The also have little ones that work great for coils and such and some that work great for 18650 batteries,

View attachment 502512
Strange thing they are 9.07 each with 7.85 shipping on Wally Worlds web site HUH!
http://www.walmart.com/ip/Advantus-3-x-5-inch-Plastic-File-Index-Card-Holder-Clear/42788352

They are in the office supply section.

the 30 ml bottles of flavoring from Wizard labs fit in the boxes nicely too.

Nice! Since I only make one flavor..I have one box for all of the stuff. Only things that don't fit are the big bottle of PG and VG which I keep in the cupboard. For the other stuff I use this:

 

[fourthrok]

Happy Halloween All
They're coming for us!!!!

Saw that on the news last night...haha!

 

[chopdoc]

There is this one coming out that takes 3 18650's

Watching the review I would love to have one of those, but seeing how its going to be around $170, I will love it from afar!

 

[Oregon Linda]

I just noticed something, though. It doesn't have the Kangertech logo on it, even though the other, um, inauthentic, tanks all still have the Kangertech logo on them. Kanger doesn't list it on their website either.
Maybe the counterfeiters are taking it upon themselves to make improvements?

There are tons of clone subtanks on FT. Some with various improvements. If the listing says "Styled", it's not the authentic.

If they manage to find a way to put a temp sensor in the coil head or deck area like they were working on, then it will change up the industry completely. They really need to move away from the ancient 510 connector.

Couldn't agree more! We wouldn't have so many stripped thread problems with mods if we had a better connector.

I think this is still in it's infancy. If they develop Lipo's that are smaller and with better Watt Hours and are easier to swap out I think that would be great. I like that you can just change the batteries and that you get longer vape time. I'm really waiting for Innokin to come out with their mod that is supposed to TC Kanthal. That will be a game changer for sure!

The Innokin Disrupter already has swappable lipos. I won one in the contest they had and am really liking it.

 

[chopdoc]

LOL

 

[Robert Cromwell]

The Innokin Disrupter already has swappable lipos. I won one in the contest they had and am really liking it.

Not sure they are lipos maybe just an 18650 in a box? Don't really know.