Tootle Puffers, Redux (The Sequel)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
- Status
You mean of the chimney parts? Can't. the EHpro chimney-top is longer/taller; if you try to use a tobeco chimney-top with the rest of the ehpro KFL+, it won't reach and engage with the small o-ring at the top, just below where the driptip fits.
Andria
You need to give us the run down, "poppin'" style:
Jay
The only thing popping are my old knee, back, and shoulder joints!!!
i knew someone once thought they were a mushroom
he said" i must be a mushroom"
i asked why
his answer was "i am always kept in the dark and fed on bull poop"
so there ya go how to tell if you are mushroom or not
i could not find any mushroom juice for ya
but if you want it because you heard it makes big mushroom clouds well thats just a myth
i did find these tho
but if you want it because you heard it makes big mushroom clouds well thats just a myth
i did find these tho
I have a hard time with this domed top biz. Other than reducing the inner volume slightly how can it make a difference. I would need to experience it, it's not logical captain.
Achilles is flat topped isn't it?
Likewise, Woofer.
I have Tobeco, EHPro and a few different ones from FT. Using the same flavor, coil value and power settings, I can't tell much difference in them at all.
One of the FT models I had to dremel out the juice slots, as they were not machined well. Otherwise OK.
Machining and general quality on the EHPro and Tobeco are both very good.
Agreed I have a few of both and have no problems with either. Flavor and build to me are the same.
I've got EHPro and Svoe KFL-Lites ... I can't tell the difference in vape or flavor between them. Maybe I'm just not a discriminating flavor taster.
As a confirmed MTL vaper...I am moderately disinterested in the plethora of sub-ohm tanks coming to market...
But...Joyetech Cubis (with prebuilt 1.5Ω Clapton coil) may offer something for us Tootle Puffers...
from Spinfuel...
The Cubis tank is a state-of-the-art tank, with hidden airflow and a leak proof glass tank.
In the four years of reviewing vape gear I’ve never seen a tank like the Cubis. It looks to me as though Joyetech has listened to what all vapers had to say about how they “wish” a tank could be and then made it happen.
Filling – No more trying to fill a tank through various bars or slats of metal in the way. When you remove the top cap of the tank the entire glass tank is wide open. On the side of the tank there is a mark, the word “Max” that indicates the fill line so you don’t overfill it. You just fill the tank to the fill line, return the top cap and coil head assembly and you’re ready to go. Innovative and VERY welcome.
Despite all the metal drip tips I’ve used in the past, I much prefer glass or plastic. Joyetech has included both metal
and plastic drip tips, and the plastic is very resistant to heat.
The Technicals
The leak resistant cup-style tank reservoir allows the entire top section and coil head to be removed as one solid unit. Lifting it out reveals the tank. Removing this section allows for easy juice refilling AND coil replacements.
The upper airflow system is invisible to the users and makes it easier for air to flow through. While it looks simple, it is a really innovative way to approach the airflow needs of a sub-ohm tank.
SPECS:
Size: 22.0mm*60.0mm
Capacity: 3.5ml
Color: black/silver
Applicable Heads: BF SS316-0.5ohm, BF SS316-1.0ohm, BF Clapton-1.5ohm
Mouthpiece: 11.5mm*16.0mm
Clapton Coil for Mouth to Lung
Joyetech has developed and produced the very first Clapton coil for mouth to lung users a 1.5 ohms’ coil head that provides the mouth to lung vaper a whole new level of satisfaction.
The biggest problem for mouth to lung vapers was getting enough flavor and vapor from a tight draw coil head. With this new Clapton coil set up that is no longer an issue. I spent more than a day using this coil head on one of my Cubis tanks and I have to tell you, had this been around when I switched to sub-ohm tanks I doubt I would have adopted the Lung Hit method of vaping. If you are a mouth to lung vaper that has never been thrilled by the performance of your tank and coil heads, I urge you to try one of these. I’m betting you won’t find anything on the market that hits better, or provides as much flavor.
Joyetech Cuboid and Cubis - Full Review - Spinfuel eMagazine
CUBIS $19.99, Heads $8.99/5 pack (FREE shipping over $15):
Authenitc Joyetech Cubis Silver 3.5mL 22mm Tank Atomizer
But...Joyetech Cubis (with prebuilt 1.5Ω Clapton coil) may offer something for us Tootle Puffers...
from Spinfuel...
The Cubis tank is a state-of-the-art tank, with hidden airflow and a leak proof glass tank.
Filling – No more trying to fill a tank through various bars or slats of metal in the way. When you remove the top cap of the tank the entire glass tank is wide open. On the side of the tank there is a mark, the word “Max” that indicates the fill line so you don’t overfill it. You just fill the tank to the fill line, return the top cap and coil head assembly and you’re ready to go. Innovative and VERY welcome.
Despite all the metal drip tips I’ve used in the past, I much prefer glass or plastic. Joyetech has included both metal
The Technicals
The leak resistant cup-style tank reservoir allows the entire top section and coil head to be removed as one solid unit. Lifting it out reveals the tank. Removing this section allows for easy juice refilling AND coil replacements.
The upper airflow system is invisible to the users and makes it easier for air to flow through. While it looks simple, it is a really innovative way to approach the airflow needs of a sub-ohm tank.
SPECS:
Size: 22.0mm*60.0mm
Capacity: 3.5ml
Color: black/silver
Applicable Heads: BF SS316-0.5ohm, BF SS316-1.0ohm, BF Clapton-1.5ohm
Mouthpiece: 11.5mm*16.0mm
Clapton Coil for Mouth to Lung
Joyetech has developed and produced the very first Clapton coil for mouth to lung users a 1.5 ohms’ coil head that provides the mouth to lung vaper a whole new level of satisfaction.
The biggest problem for mouth to lung vapers was getting enough flavor and vapor from a tight draw coil head. With this new Clapton coil set up that is no longer an issue. I spent more than a day using this coil head on one of my Cubis tanks and I have to tell you, had this been around when I switched to sub-ohm tanks I doubt I would have adopted the Lung Hit method of vaping. If you are a mouth to lung vaper that has never been thrilled by the performance of your tank and coil heads, I urge you to try one of these. I’m betting you won’t find anything on the market that hits better, or provides as much flavor.
Joyetech Cuboid and Cubis - Full Review - Spinfuel eMagazine
CUBIS $19.99, Heads $8.99/5 pack (FREE shipping over $15):
Authenitc Joyetech Cubis Silver 3.5mL 22mm Tank Atomizer
Last edited:
Hmmm... that's actually kinda interesting... Of course now that I have two Kabuki 510's on the way, something else "innovative" comes out. Man, the wife's gonna kill me... 
Hmmm, if this is how Joyetech thinks they fulfill the EU's 'leakfree filling' requirement, they are wrong I'm afraid... Oh well...
I like the fish! It's what I wanted...and looks awesome on my sig!Wear it prowdly, dear one! Some peeps just get a fish.
Happy B*day!
I've downgraded to a kayfun at 17.5 watts to save battery & juice. Am I a tootle puffer yet?
I've downgraded to a kayfun at 17.5 watts to save battery & juice. Am I a tootle puffer yet?
- Status
Similar threads
