Are you done stocking up?

[MikeE3]

This is the deal of the century, on kayfun 3.1 clones!!!! Kayfun 3.1 Clone Less than $2 each. There are 51 'brushed' and 71 'polished' left, as I type this. I've got my share, now it's your turn.

Careful ... it looks to be a Russian w/ the screw in drip tip & adapter for regular tips not a kayfun.

 

[DaveP]

This is the deal of the century, on kayfun 3.1 clones!!!! Kayfun 3.1 Clone Less than $2 each. There are 51 'brushed' and 71 'polished' left, as I type this. I've got my share, now it's your turn.

Thanks for the tip on the Kayfuns!

I ordered 5. Shipping was $2.99 for 1 or 5. I really don't use KF 3.1 much these days. I'm stuck on KF lite plus V2, but I have 3 or 4 each of the V2, V3.1, and V4 versions and one KF5. I might as well have more than I'll every need! At that price they are cheaper than buying replacement parts.

What I want now is a Kayfun Mini V3. Those are sold out until the Chinese New Year drought is over!

 

[mmsjs5]

My first order from them was on the 14th, and came today. Totally reasonably priced shipping and FAST!

I have never tried the 3.1, but couldn't resist the price. Thought the worst that could happen would be spare parts for the couple dozen +V2's that I have. The 3.1's are replacing the +V2's!!!

After I make sure the ones I ordered today are the same, I will have some +V2's to rehome.

 

[DaveP]

My first order from them was on the 14th, and came today. Totally reasonably priced shipping and FAST!

I have never tried the 3.1, but couldn't resist the price. Thought the worst that could happen would be spare parts for the couple dozen +V2's that I have. The 3.1's are replacing the +V2's!!!

After I make sure the ones I ordered today are the same, I will have some +V2's to rehome.

I vaped the 3.1 for 2 or 3 years before trying a V2. KF3.1 is a good vape and I didn't mind the fill screw on the side. of the deck. I do think that the KFV2 is a little more flavorful than the 3.1 and the bottom fill is easier for me. The 3.1 is easy to take apart and reassemble. It doesn't leak unless it gets hot it the sun or in a pants pocket in the Summer as long as the o-rings are sealing well. Even then, it's just a weeping from juice heat expansion. They all suffer from heat expansion weeping.

The K4 is flavorful, but finicky. There's way too many parts to keep up with if you like to take them apart and wash them up here and there. It's also possible to reassemble things wrongly. The V4 is one of those tanks that you need to use every day and wrap your head around all the parts and how they fit together.

I bought the KF5 and vaped it for a while. It's a greatly improved version of the KF4 and it's easier to take apart and reassemble.

The KF Lite Plus V2 is a keeper and a good daily vape. It's just simple and well thought out for low watt vaping.

 

[Keiwie]

Careful ... it looks to be a Russian w/ the screw in drip tip & adapter for regular tips not a Kayfun.

You are most definitely pretty correct. This is a Kayfun clone, BUT Kayfuns and Russians for the most part were clones of eachother. Up until about the Kayfun v4, Svoemesto and Kebo were essentially copying eachothers products. I believe its a touchy subject for some so I won't go into it but from what I remember, that's what was going on.

So in essence, yes it is a Russian, but it is also a Kayfun lol

They have some other things on sale as well, I know I posted here a while back about it but just for reference here is their clearance category ...Clearance Center... - ECigSupply

 

[JCinFLA]

ECigSupply is the same place I posted about back in September, too. They had their Innokin iTaste MVP 2.0 mods (regular, Shine editions, & Energy editions), MVP 20W mods, JoyeTech 510 Double Starter Kits, and other stuff all at really super low clearance prices. Quite a few of us loaded up on some of that stuff, too, then. They really have blowout prices when they decide to put something on Clearance!

It's weird, but they also have a bunch of stuff at blowout prices that isn't listed in their Clearance section. You pretty much have to just browse around to find the other stuff from $.99 and up.

 

[Dubminer]

Does anybody know a USA based website selling the original Ego one? Also can the CLR coils be used in the Ego aio D22? Thank you for any help.

 

[mmsjs5]

I do think that the KFV2 is a little more flavorful than the 3.1

Draw and throat hit are #1 and 2, for me, since I vape mostly unflavored.

They have some other things on sale as well, I know I posted here a while back about it

same place I posted about back in September, too

I don't remember how I found them, so may have you 2 to thank. THANK YOU!

 

[Keiwie]

Does anybody know a USA based website selling the original Ego one? Also can the CLR coils be used in the Ego aio D22? Thank you for any help.

I had seen they had the Ego One on ecigsupply but they were out so I called them up, they said they have the 1100mAh kit but it's not on the site and said they will have it up and ready to buy in about 15 minutes. I'll post a link as soon as they call me back to let me know

 

[Keiwie]

Draw and throat hit are #1 and 2, for me, since I vape mostly unflavored.





I don't remember how I found them, so may have you 2 to thank. THANK YOU!

I found them a long time ago when I first started vaping and have shopped with them ever since. I do like to promote them wherever possible since they have been very good to me and their pricing seems extremely reasonable, plus they are local which I like a lot more then sending money outside the US

 

[Keiwie]

Does anybody know a USA based website selling the original Ego one? Also can the CLR coils be used in the Ego aio D22? Thank you for any help.

Looks like they posted it! Here's the link: Joyetech eGo ONE 1100mAh Starter Kit Silver

 

[Dubminer]

Looks like they posted it! Here's the link: Joyetech eGo ONE 1100mAh Starter Kit Silver

Thank you for the link.

 

[Ladiekali]

I went for the key lime pie and I don't really dig it. Has a touch of mint or menthol in it that kind of turns me off. I don't hate it, may like it more when it is 120 degrees here, but it didn't knock my socks off.

Good to know. I highly doubt ill be happy with the two I have bought. But boy do they sound yummy

 

[Riplea]

RTS vapes is having a 10 percent off sale on their nicotine, vg, pg. Just click on coupon tab for info. 25 percent off on some of their other stuff. Seems like lots of sites are having St. Patrick day sales.

 

[Katdarling]

I vaped the 3.1 for 2 or 3 years before trying a V2. KF3.1 is a good vape and I didn't mind the fill screw on the side. of the deck. I do think that the KFV2 is a little more flavorful than the 3.1 and the bottom fill is easier for me. The 3.1 is easy to take apart and reassemble. It doesn't leak unless it gets hot it the sun or in a pants pocket in the Summer as long as the o-rings are sealing well. Even then, it's just a weeping from juice heat expansion. They all suffer from heat expansion weeping.

The K4 is flavorful, but finicky. There's way too many parts to keep up with if you like to take them apart and wash them up here and there. It's also possible to reassemble things wrongly. The V4 is one of those tanks that you need to use every day and wrap your head around all the parts and how they fit together.

I bought the KF5 and vaped it for a while. It's a greatly improved version of the KF4 and it's easier to take apart and reassemble.

The KF Lite Plus V2 is a keeper and a good daily vape. It's just simple and well thought out for low watt vaping.

I actually had forgotten that I own one! (It was in da stash.) The posts here jogged my memory and I decided to give it a whirl this morning.

Vaping beautifically and not a drop in site (with my kompact setup).

3.1 on de left, and KFL on de right:

 

[RainSong]

This is the deal of the century, on Kayfun 3.1 clones!!!! Kayfun 3.1 Clone Less than $2 each. There are 51 'brushed' and 71 'polished' left, as I type this. I've got my share, now it's your turn.

I have absolutely no idea if me or the hubby will like these, we are waiting for KFM v3 and KFM v5 (clones) to arrive on the slow boat from China. At under $4 each after shipping I'm game to give them a go.

 

[Who_Dey_1991]

VapeNW is having a 10% off sitewide sale. Coupon code: LUCKYYOU

 

[aikanae1]

I actually had forgotten that I own one! (It was in da stash.) The posts here jogged my memory and I decided to give it a whirl this morning.

Vaping beautifically and not a drop in site (with my kompact setup).

3.1 on de left, and KFL on de right:


View attachment 641755

The website looked like a threaded driptip.

Sent from my LGLS992 using Tapatalk

 

[Katdarling]

The website looked like a threaded driptip.

Sent from my LGLS992 using Tapatalk

Mine came with a threaded drip tip, but also a threaded adapter to allow use of any 510 tip. See the little piece, bottom right? That's the adapter.

Also, mine are set up with bell caps which eliminates a lot of the KF bits and bobs.

 

[GaryInTexas]

I bought several of those Kayfuns. Cheaper than buying parts and bases. Will probably never need them with my stash but $23 shipped for 10, yeah I getting them.