CE2-DELUXE Fluxomizer Clearomizer All NEW Uncrackable SuperTubes, New Everything, All ohms, In Stock @ GOTVAPES -Official Ce2-Deluxe Thread

[Mindfield]

i tried with just the second ring, seems better and seem to get consistent wicking. still get juicy vapes though, guess i'll just have to learn to live with it. the old ones definately didn't have this happening. but I guess tubes that don't crack, that you can see through are worth the extra juice consumption.

what i'd like is to be able to poke a couple of holes into the second ring and just be able to fill without removing it every time, not sure how to make the holes though.

The silicone is very soft. If you wanted to make a fill hole you could poke a sewing needle through, or perhaps a really tiny gauge blunt or hypodermic needle. (18 or 20 gauge should do.) As long as your juice isn't too thin (like, pure PG) you shouldn't get any leakage.

Are you using a drip tip? I find that really helps significantly cut down on condensation accumulating so much that you get juice in the mouth.

 

[shanagan]

all answers will be given soon, there is 15 new things arriving, be patient, as well as ce2 easy fill plug and MP has been fixed by gotvapes and much much more breaking news coming in a week.

others have seen it in action, its real it exists, the first molds fit perfectly, a small test batch of 200 mp and easy fill plug are incoming, we will have the community here test them, if everyone is happy, days later thousands will arrive and the ce2 will finally be solved for good.

then there is the multitude of other bombs just will blow you all away.

the mixrocig x7 is the updated ce3, there is a reason we waited, now you know why, and yes its improved.

I'm such a girl - I'm all like, "blah blah blah... PRETTY!" (Actually, I'm more raccoon than "girl" - luv the shiny things. )

 

[Sedateme]

If you use the rubber mouthpiece that comes with each box of fluxo's to push the middle o-ring so it sits on top of the ceramic cup, and use a regular drip tip, you shouldn't see much leakage at all. I tried just putting the middle o-ring in and pushing it in with my drip tip, but it doesn't sit on the ceramic cup that way and will lead to leaks if you don't constantly keep them upright. With the o-ring sitting on the cup, you do get a little space between the o-ring and the drip tip for juice to sit but it doesn't seem to leak out easily.

 

[monarch79]

I just use the back of the fill 'needle' that comes with the fluxos to push that donut down flush with the cup, and be sure to put the connector end down on your table so you don't push the guts right through... I learned that the hard way! You can also take a second donut, and push that in with your drip tip, which will leave a tiny space between the two donuts to gather that 'extra juice'

 

[Crickett]

I love these, these are my absolute favorite !

 

[gman1000]

they have shipped, anyday they should be here

Hi badkolo, will these be the updated ones you have been hinting at?

 

[vikki59]

Are you going to be selling replacement tubes for the ce2 DeLuxe??? I was just wanting to get some for my old ce2's, I would actually use them then... I have used 1, it came cracked, replaced it w/new tube, lasted about a week b4 it leaked everywhere. So I threw the rest of them in "the" drawer. Would love to pull em out. I know I can get them syringes, blah blah blah . I'd much rather just get some decent tubes that are the correct length, etc etc.. And maybe green ... Thx !!!

 

[Randyrtx]

I'm sure this has been answered somewhere, but can anyone confirm for me that the Sapphire cone/caps fit properly with the CE2 Deluxe?

 

[ZebadeeDoodah]

Depends on what you mean by "properly." You have to push past a little resistance to get it on, but it goes on just fine. When I unscrew the cone, though, the CE2 unscrews with it and has to be pushed out of the cone with a drip tip. However, I was demonstrating this to a friend on his battery and it unscrewed fine, leaving the CE2 Deluxe on the battery. So YMMV.

Anyway, they definitely work acceptably.

 

[Tendril]

I'm sure this has been answered somewhere, but can anyone confirm for me that the Sapphire cone/caps fit properly with the CE2 Deluxe?

Hey Randy,

I haven't tried it but I just took some measurements for you if this helps:

GotVapes Sapphire:
Center of the 'tube' OD: 0.380"
Base/connector end OD: 0.382"

CDE-2XL Fluxo:
Center of the 'tube' OD: 0.382"
Base/connector end OD: 0.403 - 0.407"

It looks a Sapphire cone should slip over the body of the current fluxo just fine. I'm not sure what the inside of those cones look like or how tall they are ... the 20 to 25 thousandths of an inch larger dimension on the base of the Fluxo vs. the Sapphire could possibly be too large for the cone (I don't have one to measure). If the inside of the cone tapers it might clear the base when screwing on over the fluxo

 

[Randyrtx]

Great guys, thanks!

 

[UpInTheCut]

Hey everyone, so I got my ce2 deluxes today and am getting a burnt wick taste. I am using only the center o ring with the donut cut out and I fluffed the wick too. I also dripped 2 drops of liquid right on the atty and burned it off before filling. I have only taken 10 or so puffs, it is hitting like a freight train just the flavor isn't there I am using fsusa ry5 50/50 nicquid. Am I doing something wrong? This is the 1st time I've used these. Thanks for the input
-Up

 

[naviathan]

Hey everyone, so I got my ce2 deluxes today and am getting a burnt wick taste. I am using only the center o ring with the donut cut out and I fluffed the wick too. I also dripped 2 drops of liquid right on the atty and burned it off before filling. I have only taken 10 or so puffs, it is hitting like a freight train just the flavor isn't there I am using fsusa ry5 50/50 nicquid. Am I doing something wrong? This is the 1st time I've used these. Thanks for the input
-Up

I think you probably shouldn't have dripped and burned. If you don't get it burned completely off you will end up with a burnt flavor until you clean it completely.

 

[byggd]

I have one juice that I really like but it tends to be too thick to wick properly in these units. I diluted it with about 10% purified water and went through about 4ml over the weekend. So far so good …. I just hope it doesn’t cause any other problems.

 

[Mindfield]

Hey everyone, so I got my ce2 deluxes today and am getting a burnt wick taste. I am using only the center o ring with the donut cut out and I fluffed the wick too. I also dripped 2 drops of liquid right on the atty and burned it off before filling. I have only taken 10 or so puffs, it is hitting like a freight train just the flavor isn't there I am using fsusa ry5 50/50 nicquid. Am I doing something wrong? This is the 1st time I've used these. Thanks for the input
-Up

Have you modded them in any way?

 

[UpInTheCut]

When I dripped on the atty I got a pretty funky/burnt smell.. I might have burnt the wick that may be my problem.. I'm gonna try another one, but without dripping right the on the atty. I will mod it by only using the center o-ring also use the donut mod that mindfield uses fluff the wick. The 50/50 juice isn't too thick so I don't think that's my problem.
-Up

 

[badkolo]

you should drip on the atty and cook the juice off until its clean
using short bursts of 5 seconds
just drop 2 drops on your coil area and burn it off completly, this is a great method for prepping them. remove the plugs when you do this.

 

[UpInTheCut]

Ok my 2nd one I opened is doing much better no burnt taste, but the flavor is pretty subtle. Though it's hitting like a fright train Is there a break in period for these?
I feel like a noob... lol
-Up

 

[UpInTheCut]

Tried a thinner liquid and they are doing much better the flavor is really coming out now. I guess the 50/50 is a little too thick...
I'll try using a couple drops of water he liquid out a to thin the liquid out a little and see if that helps
-Up
Thanks for the tips and tricks

 

[Tendril]

Tried a thinner liquid and they are doing much better the flavor is really coming out now. I guess the 50/50 is a little too thick...

Either I'm crazy, or VirginVapor (a true 100% vg) and VaporBomb's 100% VGs, unthinned, work perfectly in these units. For what it's worth, I don't fluff the wicks either. Same with the Vision etc. I've tried 100% PG & 50/50 and I don't think those outperform the VG. On the original Bud Sapphires wicking the VG was a bit of a problem but it works great with the new ones