yea sorta got me wondering, the sample i'm gettin i'm gonna at least boil it twice before trying it
iTaste MVP v2 Owners Group
- Thread starter KnurledNut
- Start date
- th_trl_thread_readers 0
- Status
yea sorta got me wondering, the sample i'm gettin i'm gonna at least boil it twice before trying it
enjoy man, i do
even fired it with a 28.5 atty, just for the heck of it....firing straight off the battery @ 0.44....wanted to see if it would fire and it did but i don't recommend using that low of a resistance.....i usually stay between 0.7 & 1.3
even fired it with a 28.5 atty, just for the heck of it....firing straight off the battery @ 0.44....wanted to see if it would fire and it did but i don't recommend using that low of a resistance.....i usually stay between 0.7 & 1.3
Last edited:
you might want to wait until the dust settles in-case any of us Ginni-pigs fall over dead
just kiddin!
I think of you guys as "Canaries in the vaping community coal mine", but Ginni-pigs work too.
You crazy kids with all your fancy elctro gadgets! Back in my day, we rolled up dried, chopped up tobacco leaves in rice paper, lit the end of it and sucked the smoke out then coughed our freaking lungs up all day!
the Aspire Nautilus mini (really it's the new vertical coil) will probably suck me back into clearo land for another try. Could this be the next generation of my beloved carto tanks?!?!
The Aspire Nautilus Mini is HEAVENLY - YouTube
Thanks for the link!!!
Got an Aspire Nautilus (with the "old" heads) on a Deal of the Day. Disappointed (couldn't compare with my CartoTanks) => put it in my "back-up" drawer.
Now...figure I'll get some BVC's (since they're "backwards compatible") and give the ol' Nautilus another try. (I mean...he says they're "equal to or better than a Kayfun"!!??!!)
Aspire Bottom Vertical Coil (BVC) 5 piece
Can't see anything about that on rakuten.com. How, exactly, do you get $10 off when using your Visa card???
Nope, not yet. Haven't had a chance. Its put away until we have the time to mess with it. I have a feeling that even thought the symptoms don't line up completely, it may still be the button...........@1LastShot
did you figure out what was wrong with the SVD
Vape mail! My MVP just got a new pal.
How do you like it so far? I tried one at a B&M with my .6 ohm Stillare and it wouldn't fire correctly, only got a couple hits and then it wouldn't read my RDA. Let me know what you experience. I think I am going for the new IPV 50 watt ( it takes me forever to make these decisions
I will make my mind up over the next couple weeks.Still loving my MVP though, full of 6mg nic Ecto cooler goodness at 1.3ohms on the always dependable Kayfun lite.
Wow! 30 guage 9 wraps; you cats werent kidding this ..... is the truth! Hits harder than the Aerotank Mega I just bought with new head, and thats dual bottom coil! Currently at 9 watts and working up. I really like how flexible the Protank 2 is.
I think ill end up going to 8 wraps on 30 guage- it takes a solid 3-4 seconds to get warm if its sat awhile, and my resistance is showing 2.1. If im chain vaping though, it keeps up and stays producing. In line with many recommendations here ill aim for 1.5-1.8. That should give me a slightly quicker warm up time (less overall thermal mass with less wire as luke213 pointed out and DingerCPA confirmed).
Midnightoyl, luke213, b.m., DingerCPA, herb and KTMRider- thanks very much for the replies!
Vape on
I think ill end up going to 8 wraps on 30 guage- it takes a solid 3-4 seconds to get warm if its sat awhile, and my resistance is showing 2.1. If im chain vaping though, it keeps up and stays producing. In line with many recommendations here ill aim for 1.5-1.8. That should give me a slightly quicker warm up time (less overall thermal mass with less wire as luke213 pointed out and DingerCPA confirmed).
Midnightoyl, luke213, b.m., DingerCPA, herb and KTMRider- thanks very much for the replies!
Vape on
How do you like it so far? I tried one at a B&M with my .6 ohm Stillare and it wouldn't fire correctly, only got a couple hits and then it wouldn't read my RDA. Let me know what you experience. I think I am going for the new IPV 50 watt ( it takes me forever to make these decisions
Still loving my MVP though, full of 6mg nic Ecto cooler goodness at 1.3ohms on the always dependable Kayfun lite.
something is wrong with the device or the RDA or the RDA wasn't screwed in far enough to make good contact, the Cloupor will fire down to 0.3 but when it's that low it fires directly off the battery and will not read resistance of the Atty (maybe the battery level was low).....but at 0.6 with a decent batt charge it should have worked fine.
Last edited:
.....@Vermiform, i'm an old-timer but i like fancy gadgets
and he who dies with the most wins!
it was something i picked up on at a Myco site, very usefull stuff and clean.......haha yep it's been a long while now, still get a patch once in awhile under the airconditioner where it drips outside from Myc i buried there yrs ago....was a B+ kind of guy in school, you know what i mean
i just might try some polly-fill in a blank carto, take a few vapes and see what happens
Oh.. I know all about pollyfil and myco work. I know all about getting b+ in school
Small world when hobbyists cross paths on forums.
Via spontaneous binary code
Last edited:
- Dec 18, 2013
- 2,946
- 56,640
- 80
.....@Vermiform, i'm an old-timer but i like fancy gadgets
Me too. Unless that "fanciness" meanz they made it so small u need a magnifying glass or reeeeaallly teeny fingerz to use it. Then I just scratch my hed in wonder.
After getting my first CartoTank...I've been replacing my Clearomizers with CartoTanks...except for my T3S's.
pufZeppelin posted a link for the HyperTank 2...which is Pyrex and 5 ml....and uses the same coils as the T3S.
HyperTank 2
How do you like it so far? I tried one at a B&M with my .6 ohm Stillare and it wouldn't fire correctly, only got a couple hits and then it wouldn't read my RDA. Let me know what you experience. I think I am going for the new IPV 50 watt ( it takes me forever to make these decisions
Still loving my MVP though, full of 6mg nic Ecto cooler goodness at 1.3ohms on the always dependable Kayfun lite.
I love my MVP. I will use it until it dies. That said, the Cana is pretty dang boss.
I generally run a 2ohm kayfun at 4.2v, or a 1.4ohm dripper at 5v on my MVP. I tossed my dripper on the cana and bumped the wattage to hit 5v... Let's just say that the cana has shown the 'weakness' of the MVP.
Again, I really do love my MVP. And I thoroughly understand the limitations of the chipset. The cana is just in a whole other ballpark.
Because I'm a glutton though, I am also ordering an ipv2.
Wow its crazy those two mods in your picture is my every day carry around mvp & Cana. Speaking of carry around here's a picture of a new addition to my tool box My mvpenjoy man, i do
even fired it with a 28.5 atty, just for the heck of it....firing straight off the battery @ 0.44....wanted to see if it would fire and it did but i don't recommend using that low of a resistance.....i usually stay between 0.7 & 1.3
Wow its crazy those two mods in your picture is my every day carry around mvp & Cana. Speaking of carry around here's a picture of a new addition to my tool box My mvp
it's a Cloupor next to the MVP.....and that Tool-box of your's ain't to shabby lookin either
the PufMister gave me a link to a Visor that has a light & a magnifier glass on it, you wear it like a hat....think ima gettin it or one like it......get's rough wrapping them small RDA coils
Well, I think ive found my preference thanks to you folks. Running 30 guage 8 wraps (over 1/16th drill bit). Heats up pretty quick, hits strong, seems to chain vape well, and the taste is incredible. It makes the Aerotank Mega taste like im sucking air in comparison.
How much cotton do you guys put in for wicks? I think I might have a little too much; I put the cotton in where its a snug pull, then pull it back and forth until it slides easily- does this sound right?
Hopefully I can stop myself from wiring coils/doing wicks and actually get around to vaping for more than 5 minutes
How much cotton do you guys put in for wicks? I think I might have a little too much; I put the cotton in where its a snug pull, then pull it back and forth until it slides easily- does this sound right?
Hopefully I can stop myself from wiring coils/doing wicks and actually get around to vaping for more than 5 minutes
Well, I think ive found my preference thanks to you folks. Running 30 guage 8 wraps (over 1/16th drill bit). Heats up pretty quick, hits strong, seems to chain vape well, and the taste is incredible. It makes the Aerotank Mega taste like im sucking air in comparison.
How much cotton do you guys put in for wicks? I think I might have a little too much; I put the cotton in where its a snug pull, then pull it back and forth until it slides easily- does this sound right?
Hopefully I can stop myself from wiring coils/doing wicks and actually get around to vaping for more than 5 minutes
you want to play with the amount of cotton you use, but any tight spots inside the coil will burn, some make the ends of the cotton bigger (more) and keep it pull thru inside the coil in the middle...also your jooze well depends on how much to use, try different configurations and you can put a small amount rite under the coil also, just push it under with a small screwdriver.......make sure to keep the coil height even and centered with your air-holes, always helps with taste.....but you prob already know this, enjoy man!
edit: my bad i thought you were doing RDA's, guess i better get my glasses on
Last edited:
- Status
Similar threads
