iTaste MVP v2 Owners Group
- Thread starter KnurledNut
- Start date
- th_trl_thread_readers 0
- Status
the authentic Kanger T3S has a ‘lip’ inside the tank (&MT3S)
the T3S coils are smaller
qwik way to tell is by looking at the bottom o-ring (on coil)
T3S coils, that flat pan washer above o-ring is almost the same size
ALL OTHER kanger coils are much larger (won’t go into a T3S tank)
this is a pic of a standard bcc coil (not T3S)
you can see the washer above o-ring is distinctly bigger
- http://fasttechcdn.com/products/142/1423110/1423110-2.jpg
my experience is T3S coils fit in all kanger bcc's
so why not only buy them (and I did since way back)
I got to check my Fasttech order but i believe i bought two non authentic T3s style clearos and was hoping to use Pro Tank heads.
- RBC Clearomizers
these are Very light, and work "lights out" (kanger bcc acceptable)
- - -
haha, thought flaming arrows were inbound
due to poo, pooin the all mighty kayfun
it seems to work ok, once it is all together it is rock solid
I’m just more comfortable with my high performance DIY bcc’s
- - -
what, a month ago those nautilus were $42 bucks
another one not interesting to me
now we are in the era of the bvc, see how that plays out...
That's why I'm interested on the T3D (for double coils). Those are cheap, driptip changeable and use Aerotank heads. The only thing that worries me is the big base that doesn't fit most mods.
tell ya what
I've got several of those (non authentic T3s style clearos )
and they are GREAT !
only trouble is be careful not to separate the bottom metal ring
from the tank...
say coil isn't screwed in tight, screwing base on then 'press fits' the base right off
all my T3S, bcc, & smoktech coils fit in them great
ya know something
it's not like that anymore
one of the changes they made to the T3'D
base is now same as a EVOD etc (14mm)
(where it used to be 14.5mm-15mm?)
I don't care for the dual coil (bdc) but like the tanks
so I bought a T3"D and now make the bdc a single coil
and as happy as a bird in a tree...
I liked the old 15mm knurled bases myself...
I just went to MFS site and used the coupon HALFOFF and it only gave me $11 off of a $43 order. Maybe the code isn't working. Anyone use it today?
don't know what all ya bought
but half off is for COILS ONLY
eta: yep, missed that part of the email
"Limit 2 Of Each Product Per Customer"
Last edited:
I did. You can only order 2 to get the half off. I just went back in again and ordered 2 more. $14.27 for 2 packs of 5 BVC coils to the door.
Could/would someone with more experience have a look at this question in Simple Solutions subforum? http://www.e-cigarette-forum.com/forum/simple-solutions/595861-brand-new-mvp-question.html. It sounds like an electronics issue and I've never had a problem with my MVPs or VV v3s.
The answers are correct. Maybe something is broken, should seek servicing.
ya know something
it's not like that anymore
one of the changes they made to the T3'D
base is now same as a EVOD etc (14mm)
(where it used to be 14.5mm-15mm?)
I don't care for the dual coil (bdc) but like the tanks
so I bought a T3"D and now make the bdc a single coil
and as happy as a bird in a tree...
I liked the old 15mm knurled bases myself...
Single coil Protank or eVod heads never worked for me, while my husband gets massive amounts of vapor. Maybe it's me... I have to vape on what's available, and nowadays it's double coil heads. I'm glad they slimmed it down, that used to be a huge problem.
I bought these my first time around FT https://www.fasttech.com/p/1360400 They're a mix between the T3 and an eVod, take both heads. Really loved them while my heads worked. The bottom ring here separates from the plastic but no sweat, simply snaps in and goes on working great.
OK, gotcha (looked at those before)
ones I'm talking about of course are these
- $2.89 T3S BCC Bottom Coil Clearomizer - translucent / 2.4ml / 1.5ohm at FastTech - Worldwide Free Shipping
wife has in pocket, bends them and 'pop!'
seems afterwards the never "quite" seal the same (especially for her)
I can normally make them work
but all that aside, they are great tanks IMO
Hello evryone. I would like to start getting into this I'm not a smoker and don't chew tobacco but more to relax possibly some herbal juice from holismoke. The set up I'm looking at buying the MVP v2 And a pro tank 2. Has anyone tried the herbal juices your thoughts and recommendations on the setup I've listed. Thanks in advance.
I'm no expert because I didn't know herbals existed. Try http://www.e-cigarette-forum.com/forum/diy-e-liquid/34203-herbal-extract-e-juice.html
Had that happen a few times already , thats really annoying . I wish you could fill them from the top like the T2's , so your saying regular Pro Tank coils won't work with them huh ?
Yeah , sorry , don't have experience with herbals , your the first i have heard that wants to get into this and not being an ex smoker lol. Usually if someone wants to relax they take up smoking the real herb but vaping herb (not me, i don't care to be vaped) may work for you.
Last edited:
I'm charging my husband's MVP2 via laptop and it's blinking like a Christmas tree. 2 green flashes, then red, then yellow. Every few minutes.
Does anyone know what the problem is? Thanks
Does anyone know what the problem is? Thanks
- Dec 18, 2013
- 2,946
- 56,640
- 79
Sounds like the charger is breaking connection. Either try unplugging it and plugging back in (maybe a different port if you have one?) or charge somewhere else. I'm not fond of charging from a laptop since you're essentially charging a battery from a battery.
- Status
Similar threads
