iTaste MVP v2 Owners Group

[lisancentraltx]

Well, I've got one MVP on the way from China and one on the way stateside. I am really hoping for a quick reply about the ciggy pack MVP2 J-wrap someone posted and that I sent an query about. It's the perfect stealth wrap... the only thing better would be a cell phone wrap!

 

[Pinggolfer]

Hi, SR!
My understanding is that they fit.
P

Thank you as I wasn't sure. Been reading the posts from page 1 of this thread to catch up.

 

[Pinggolfer]

Well, I've got one MVP on the way from China and one on the way stateside. I am really hoping for a quick reply about the ciggy pack MVP2 J-wrap someone posted and that I sent an query about. It's the perfect stealth wrap... the only thing better would be a cell phone wrap!

You must have steady hands as I have not had any luck with skins. I always mess them up. Glad you are skilled at them.

 

[lisancentraltx]

You must have steady hands as I have not had any luck with skins. I always mess them up. Glad you are skilled at them.

Sorry about the shakes... one thing I don't have. I can't wrap a coil without a magnification glass setup and sometimes watch repair glasses, but I guess the shakes would kill both of those tasks.

I've done a couple of J-wraps on the round mods I have... Chi-chi, Bolt, and a Silver Bullet. The good thing about J-wraps is that if you screw up, pull it off GENTLY so it doesn't stretch and re-position it. I've done this several times and I have also removed skins and put them away for later use when I was bored with the look. If you're careful then you can get them off without stretching. I've heard of others that have some sticky adhesive on them, but there's nothing sticky on the J-wraps.

Get someone to wrap it for you!

 

[Dconnor]

Does this really work and solve the problem?

Worked for me. Easy peasy!

 

[athousandyears]

Does this really work and solve the problem?

It did for me.

 

[Pinggolfer]

Worked for me. Easy peasy!

It did for me.

Thank you. I will certainly give it a try.

 

[SpicySaffron]

The button trick works for me, not that it was bugging me too much. I remember hearing someone went to the length of power sanding the button down. I feel like they could have benefited some from this trick. Work smarter, not harder.

 

[CommaHolly]

I would love to know about the ciggy pack wrap as well!

I just bought an MVP v2 this morning,,,,,

does anyone know if the wraps for version 1 will fit version 2?? I can't seem to find any that are specifically LABELED as version 2.

 

[WelshVapour]

Goodbye button wobble

Sent from my GT-I9505 using Tapatalk

 

[lisancentraltx]

I would love to know about the ciggy pack wrap as well!

I just bought an MVP v2 this morning,,,,,

does anyone know if the wraps for version 1 will fit version 2?? I can't seem to find any that are specifically LABELED as version 2.

I've got an email out to J-wraps to ask about the ciggy pack... I'll let you know what they say since the OP didn't say what they paid, just that it was expensive. The 'Custom Design' wraps are $22.50... I wonder if it was more than that? I'm thinking about a cell phone screen wrap now LOL

 

[CommaHolly]

I've got an email out to J-wraps to ask about the ciggy pack... I'll let you know what they say since the OP didn't say what they paid, just that it was expensive. The 'Custom Design' wraps are $22.50... I wonder if it was more than that? I'm thinking about a cell phone screen wrap now LOL

I'd THINK it would be a custom wrap,,,,,,,,and priced as such but if you would let me know what they say for price, I'd appreciate it

and if it's custom, I wonder if they do OTHER cigarette brands,,,,,,,,hmmmmmmmmmmmm.

 

[Capt.shay]

Does this really work and solve the problem?

Never get sick of posting it http://www.e-cigarette-forum.com/fo...on/449105-mvp-button-wobble-fix-easy-way.html

 

[njjayt82]

OK,
So I decided (finally) to upgrade to something better than the dinky 510's and smaller e-cigs I've been using for 3-ish years, and decided to go with the MVP2 I LOVE it, it's THE best thing EVER only been using it about 24 hr but it is truly incredible! the vapor production is AMAZEBALLS, and I thought I blew out a lot of vapor before ha ha(mom says I drag from my toes).

I don't have any gripes with the whole bottom button thing but since I've been reading this post, and will now know how to remedy the situation!

I did happen to notice now that the 24mg drops I've been using seem to hit is WAY stronger than I would've expected( should I chalk this up to he fact I've only been using atomizers so that's that I'm used to?) , but I'll get over it.

I do have a question to ask, it doesn't happen very often but every so often(once or twice a day) one or two drags come up tasting burnt, but I checked the coils and they weren't, and I had an adequate amount of liquid in the tank. Is it just me or is someone else out there experiencing the same thing? Even went so far as to knock down the power on the unit, and still happens. Could this be I've grown accustomed to atomizers and am now getting acclimated with wicks?

 

[athousandyears]

Got me a wrap.

 

[lisancentraltx]

Never get sick of posting it http://www.e-cigarette-forum.com/fo...on/449105-mvp-button-wobble-fix-easy-way.html

Cap'n, I haven't even gotten my MVP2 yet and I am ready for anything =] Thanks for the link!

 

[SpicySaffron]

OK,
So I decided (finally) to upgrade to something better than the dinky 510's and smaller e-cigs I've been using for 3-ish years, and decided to go with the MVP2 I LOVE it, it's THE best thing EVER only been using it about 24 hr but it is truly incredible! the vapor production is AMAZEBALLS, and I thought I blew out a lot of vapor before ha ha(mom says I drag from my toes).

I don't have any gripes with the whole bottom button thing but since I've been reading this post, and will now know how to remedy the situation!

I did happen to notice now that the 24mg drops I've been using seem to hit is WAY stronger than I would've expected( should I chalk this up to he fact I've only been using atomizers so that's that I'm used to?) , but I'll get over it.

I do have a question to ask, it doesn't happen very often but every so often(once or twice a day) one or two drags come up tasting burnt, but I checked the coils and they weren't, and I had an adequate amount of liquid in the tank. Is it just me or is someone else out there experiencing the same thing? Even went so far as to knock down the power on the unit, and still happens. Could this be I've grown accustomed to atomizers and am now getting acclimated with wicks?

If you are talking about the performance of the iclear clearomizers that come with the kit, then yes, clearomizers are somewhat of a jump from your standard atty/cart head combo. the iclears with the kit are top coil, meaning to get best performance you might have to tip them upside down every once in a while to ensure juice stays on the coil. Personally I'd invest in a bottom coil design like the Kanger Evod. There are others out there, I just know from personal use the Kanger EVOD and protank show good performance.

 

[TLS01]

I've been looking at these since we had a vape meet in Minneapolis a few weeks ago so I jumped on the 101Vape.com deal this morning. Are any of you using a wall adapter to charge? If so, what are you using, I would assume that something in the 500-1000 mah range would suffice. I thought I saw someone mention using their iPad adpter (don't make me go back through all 37 pages ).

 

[HawaiiVPR]

Got me a wrap.

View attachment 265417View attachment 265418

Nice! I was debating on getting a wood pattern myself.

 

[Symbiotic Biorhythms]

Got mine last month, love it to death!