iTaste MVP v2 Owners Group

Status
Not open for further replies.

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
Mowgli, what is normal output of a ego battery at full charge?

I am not Mowgli But if I may. I was told by my B&M it is 3.7v

believe the STATED output is :

standard EGOs 3.4v

Kangers EVOD EGOs 3.7v

regulated through out the charge span...

- - -

side note, then some upgrade / pass through EGOs
have a mode where you can set it to out put MAX Volts
as battery goes dead... (has the USB plug at bottom)

:ohmy:
 

Red Horn

Senior Member
ECF Veteran
Verified Member
Jan 31, 2014
148
37
High Desert, CA

VapieDan

Vaping Master
ECF Veteran
Verified Member
Nov 30, 2013
3,295
4,029
Flint, Michigan, United States
well because that's not the proper procedure
reguardless of popular belief the "Beauty Ring" is REALLY a SUPPORT ring...

yes it looks good and hides the threads and transitions the lines of the
tank to the mod, the true reason is to provide support of a large tank beyond the small 510 thread post...

-thread support ring on fully, then attach 510 topper (just snug)
-then thread the support ring back UP to make contact with tank, thus providing support...


the topper tank should always be tightened the same --
regardless of which ring used, or with NO ring being used...

I think this confusion is why so many people have trouble over tightening
a 510 threaded device leading to pushing the battery contact in too far...

:oops:


I also feel the beauty ring is a support item to prevent the 510 connector from being damaged by the larger attys applying torque to them. I am considering opening up the air holes a tad. Some tanks do draw tight.
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
very nice, almost added to my cart a few times...

so whats the outcome ????

are the 'twists' close, dead on, or way off - in matching marked value to tester

wanna wanna wanna know.... :blink:

We have 5 red 1300mah c-twists.
Some are pretty close and some are off by as much as .3 volts from 3.2-4.8

The 3 MVPs measure within .05 volts, my 3 Vamos measured within .1 V

It can be run in passthrough for checking wattage on the MVPs but it just flickers reading W on Vamos.
 
Last edited:

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
I also feel the beauty ring is a support item to prevent the 510 connector from being damaged by the larger attys applying torque to them. I am considering opening up the air holes a tad. Some tanks do draw tight.

Since I only snug toppers down enough to make contact they wiggle.
I appreciate the support the large MVP beauty ring gives and it's substantial enough for the KFL+

I use an old radiused PT1 beauty ring on the Vamos for the KFL+
 

InfernoOrangeSS

Senior Member
Supporting Member
ECF Veteran
Verified Member
Feb 13, 2014
232
268
58
Pelham, AL

Garemlin

Ultra Member
ECF Veteran
Verified Member
Mar 15, 2013
2,445
2,547
56
In the Mist
ODD, that the New Wave is a $dollar more than the Petal :confused:

Yeah I noticed that. She wanted the New Wave because it had purple in it. Even though it is gonna be wrapped. Shouldn't have showed her the iClear 16 comes color matched. Coulda saved a buck. LOL Not complaining as this is the best price going right now.
 

a wandering soul

Vaping Master
ECF Veteran
Feb 27, 2014
3,620
5,396
North Carolina
I think its so nice that the owners group is also a fan club. It says a lot about the device...

For the money it just cant be beat...

Mutant battery life...
Vv/vw
Ohm meter
Great vapor production
Compatible w many heads
Lcd display

It just is so cheap for all you get..

Sent from my SCH-I200 using Tapatalk
 

flexsr

Super Member
ECF Veteran
Verified Member
Jun 5, 2009
603
441
upstate new york
Hey - i really bought the mvp as a back up device and ohm reader- (and a battery back and vv/vw machine with ego threading which is nice cause i dont have an ego threaded pieces! For the price its a neat gadget/vaporizer with all those features !
However, mine came with the 16b which is my first clearo and actually not bad but the 2.2 ohms the coil head is? Is killing me - feels like vaping air and im at 32mg and have tried both the 11 watt and the 5 volts. Maybe its just me. I see they offer 16!b heads at 1.5 and 1.8- but its just weird that the max power not sufficient enough for me. Was thinking of getting a kayfun clone for it. Anyhow - any feedback on kayfun clone on this would be great and any feedback for cheapest vendor for 16b coil heads would be awesome as well .
 

a wandering soul

Vaping Master
ECF Veteran
Feb 27, 2014
3,620
5,396
North Carolina
Odd my iclear16 (not the b) offers plenty of throat hit at low watts/volts... id toy w heads but I haven't heard the best on innokin heads in general.. the 'b' models moreso. If you have the tech savvy the kayfun shpuld be sweet... the advice ive seen is to put the beauty ring on.. then the kayfun & unscrew the beauty ring so it supports the head..

Good luck!

Happy vaping!

Sent from my SCH-I200 using Tapatalk
 

a wandering soul

Vaping Master
ECF Veteran
Feb 27, 2014
3,620
5,396
North Carolina
Odd my iclear16 (not the b) offers plenty of throat hit at low watts/volts... id toy w heads but I haven't heard the best on innokin heads in general.. the 'b' models moreso. If you have the tech savvy the kayfun shpuld be sweet... the advice ive seen is to put the beauty ring on.. then the kayfun & unscrew the beauty ring so it supports the head..

Good luck!

Happy vaping!

Sent from my SCH-I200 using Tapatalk

Edited to add... maybe try different vg/pg juices as well... my fav is mister e liquids signature 33% blend

Sent from my SCH-I200 using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread