iTaste MVP v2 Owners Group
- Thread starter KnurledNut
- Start date
- th_trl_thread_readers 0
- Status
I was messing around with coil builds yesterday, and made another 0.8 coil, didn't realize the extra piece I grabbed was a 28 gauge wrapped 5 times around my mini flat head screw driver. But I did vape a ml of juice on the mvp. Then got rid of the coil, I was afraid I was going to blow up my mvp...lol I think I still have alot to learn,
I am now happy with my new coil build of 1.9ohms , 32 gauge wire wrapped 5 times nicely spaced apart
I
Not sure how the mvp 2 performs under 1 ohm but at 3.3 volts a .8 ohm coil fires at over 13 watts. Psardo shows the mvp 2 fire a 1ohm coil at 3.3 volts but that's also at its 11 watt max and slightly over 3 amps.
Sent from my SCH-I200 using Tapatalk
he also shows the mvp 2 limits by trying to fire it even at 5 volts and it only fires at 3.3 volts/11watts. Check it out its a great video.
Sent from my SCH-I200 using Tapatalk
Sent from my SCH-I200 using Tapatalk
I saw that video before I purchased my MVP, I almost didn't buy it because he said the button was hard to push (witch I fully agree with, I hate it..lol ) anyway as far as vaping at 0.8ohms I was messing with the volts setting and only stayed no more than 3.6 volts, Like I said I didn't want to keep using it, I have no clue really on the ohms things. I like to keep things very simple thats why I own the ego's and mvp and not a mod that looks like a flashlight....lol
Sadly my MVP won't charge today, this is the 2nd Innokin product that's lasted 6 months max.
How long are these things generally lasting for everyone else, I'm going right off Innokin to be honest.
If this is fixable please let me know.
How long are these things generally lasting for everyone else, I'm going right off Innokin to be honest.
If this is fixable please let me know.
Tried USB and wall charger.
It flashes as normal but the green light then goes off and no, it's not got a full battery.
Charged fine last time and the girlfriends is working in both charging environments without a problem.
I've just noticed a smell from the charging port, reminds me of a cap-gun, so I'm thinking it's had it.
Tried 3 chargers, different sockets, different USB's. The chargers are fine, just wondered if anyone else has had this problem and how long the devices are actually lasting before kicking it.
The itaste v 3.0 didn't even last 6 months so if that's how long they're generally lasting then fine, wouldn't buy any more.
Two month owner on an MVP 2.0 here. Still lovin' it. It was an incredible upgrade from a 650mah eGo. In a month or so, I'll be making a mech mod purchase, but less for sub-ohming and more for durability, and form factor with bigger RBAs. But I've got a funny story to tell.
I was gaming with a buddy who was teasing me about all the stuff I lug around with me when I'm away from home. I keep my MVP, a couple spare tanks, bottles and charger in a cigar box. He a never-smoker and the whole ecig thing is just bizarre to him. So as soon as he gets done making fun of my funny looking machine, he pulls out his cell phone and asks if I have a wall charger for his cell phone handy. I told him to hand me his cell phone and I plug it in to my MVP.
He says "okay, that is cool." I took a hit and agreed, intentionally dramatic like. Now when other people walk up to our table and ask what that thing is, I tell them it's a big battery for my ecig and my buddy say "yeah, you can charge a cell phone with that thing too."
I was gaming with a buddy who was teasing me about all the stuff I lug around with me when I'm away from home. I keep my MVP, a couple spare tanks, bottles and charger in a cigar box. He a never-smoker and the whole ecig thing is just bizarre to him. So as soon as he gets done making fun of my funny looking machine, he pulls out his cell phone and asks if I have a wall charger for his cell phone handy. I told him to hand me his cell phone and I plug it in to my MVP.
He says "okay, that is cool." I took a hit and agreed, intentionally dramatic like. Now when other people walk up to our table and ask what that thing is, I tell them it's a big battery for my ecig and my buddy say "yeah, you can charge a cell phone with that thing too."
Hmmm, I'll keep that seller in mind then. Did it actually ship from California? The only reason I ask is because I've seen that some shady sellers end up drop-shipping from China or something, even though their eBay account says they're located in the States.
I'm not too concerned with the Nano kit, but $28 for the atty itself is a screaming deal...I just get a little nervous about the "if it seems too good to be true..." thing
Yes.. It shipped from Walnut, CA.. It left the 30th, and I received it on the 2nd.
Ya, $28 is very good. I only got the Nano 'cause it was only $12 more for a kit others were starting at $15 or so for. The Nano kit is also by EHPro and fits very well and includes an extra drip tip, the full nano tank, the short tube, a spare chimney, and 2 spare o-rings. Seems he's running low on the clear one though.
Any case, up to you. Always make sure you are comfortable with the seller. I took a chance
I think there was a problem with the charging port on some of the earlier V1's. Don't know if it is relevant ?
Oops this is what I ment to do
Sent from my SCH-I200 using Tapatalk
I would like to read it too please.
pardon the typos, on my phone
Its on here somewhere.. I think in the Health forums in a sticky and a few topics linking to a study.. I cant seem to find them atm, but I know I just read another thread last night
Note, its kinda speculation at this point.. as just about every thing is, at this point.
This is my main forum and you folks are my vaping family so please forgive the 
Have had my Kayfun for 2 months and love it. Recently been adding pure VG to my 50/50 to cut the throat hit and make juice last longer ( Thanx Sando7 ) BUT... The thickness is stopping my KFL from wicking as well as it used too.
My question is 2 fold, Should I cut the juice with some kind of thinner like distilled water ( popping sounds ) or should I make the channels on the KFL deeper, wider?
2nd time I had dry burnt hit when the tank is 3/4 full...any ideas are welcome
Have had my Kayfun for 2 months and love it. Recently been adding pure VG to my 50/50 to cut the throat hit and make juice last longer ( Thanx Sando7 ) BUT... The thickness is stopping my KFL from wicking as well as it used too.
My question is 2 fold, Should I cut the juice with some kind of thinner like distilled water ( popping sounds ) or should I make the channels on the KFL deeper, wider?
2nd time I had dry burnt hit when the tank is 3/4 full...any ideas are welcome
For some reason I'm not finding it (cant seem to find anything today
) but I know there are sites and youtubes an repairing the USB connection, swapping battries, fixing wiring, etc on the MVP/MVP2
This is my main forum and you folks are my vaping family so please forgive the
Have had my Kayfun for 2 months and love it. Recently been adding pure VG to my 50/50 to cut the throat hit and make juice last longer ( Thanx Sando7 ) BUT... The thickness is stopping my KFL from wicking as well as it used too.
My question is 2 fold, Should I cut the juice with some kind of thinner like distilled water ( popping sounds ) or should I make the channels on the KFL deeper, wider?
2nd time I had dry burnt hit when the tank is 3/4 full...any ideas are welcome
I've always wondered that if you mark your chimney at where it lines up with the channels, would slightly filing those spots allow more flow to the wicks? I havent tried yet as I dont have a problem yet..
This is my main forum and you folks are my vaping family so please forgive the
Have had my Kayfun for 2 months and love it. Recently been adding pure VG to my 50/50 to cut the throat hit and make juice last longer ( Thanx Sando7 ) BUT... The thickness is stopping my KFL from wicking as well as it used too.
My question is 2 fold, Should I cut the juice with some kind of thinner like distilled water ( popping sounds ) or should I make the channels on the KFL deeper, wider?
2nd time I had dry burnt hit when the tank is 3/4 full...any ideas are welcome
yep there is a simple solution, quit cutting your 50/50 mix for the KF.... you can add all the VG you want when dripping, this was what i suggested
edit: let me get this straight are you adding more VG to your 50/50 mix for the KF?....if so use the solution above......if not set some reg store bought juice aside for your Tanks only and cut it by 1/3 instead....also use a measuring device when cutting instead of eyeballing it.
i use 50/50 mix in my KF and all my Tanks and Carto's without probs....it also helps to dry-burn & rewick your coil on a reg basis
Last edited:
- Status
Similar threads
