> pretty cool little site, some nice reasonable stands
> I think MVP switch button is about as tuff as they come (not many failures)
iTaste MVP v2 Owners Group
- Thread starter KnurledNut
- Start date
- th_trl_thread_readers 0
- Status
> pretty cool little site, some nice reasonable stands
> I think MVP switch button is about as tuff as they come (not many failures)
Wait if it reads 0.0 on the mvp that's odd. The pin error displays 'non'.
Via spontaneous binary code
Via spontaneous binary code
$67 for the eXpromizer...$40 for the MVP2.
So...you're saying...you will not consider a topper that is more expensive than the MOD it's on??? (Not sure that that makes much sense)
WOW!!! Drip Tip Organizers and Tank Organizers and MOD Organizers and Joose Bottle Organizers.
Thanx!!!
OK...Who do you think has the best fire button of all?
http://www.e-cigarette-forum.com/fo...59634-fixing-mvp-vv3-contact-issue-guide.html
Yes that is what i am saying , when you have been out of work for two + years you would probably understand . Would i like to own more than the limited stuff i have ? Of course but i can't.
Tried every hardware store within a 70 mile radius the last two days, not a single one carries them that size.
why did you remove the screw ?
a mistake or do you normally do that ?
I never take my screws out
looks like a trip to ACE hardware is in store
Wasn't on purpose , it wouldn't tighten down unfortunately and fell out .
Heh finding metric in odd sizes in the u.s. Can be a real chore.. I went to a dozen places to get a nut for my scooter. (finally succeeded at an automotive fastener specialty shop and paid 2.bucks for it :banghead:
maybe an electronics or jewelry/watch shop?
Via spontaneous binary code
We have a WINNER! He is seeing a closed short not an open contact. I would say it is in the unit somewhere. If it is out of warranty then it's time to grab a number 7 torx and have a go at opening her up and see if you can visually locate a touching wire out of place in there.
Sent mine back. Probably be two weeks or more before I get a new one. I am book marking the page that tells what to do when it does not make contact. I am keeping my airflow adapter to install in my new one. See y'all in a few weeks and thanks to all that helped
I sometimes see a 0.0 reading on some rebuilt heads , when i adjust them it fixes it.
OK, got the nano kit for my Kay fun and so excited...BUT! Cannot get it to fire on MVP or VV3. A long green light and no fire on both.
Fired on my Mech though.
Noticed the O ring on the top portion of Kayfun is missing.
The one that seats the chimney top to the top cap on KFL.
Am I shorting thru the small chimney n top of Kayfun?
Sorry to ask the MVP folk, but ya all are like family.
Reassembled with standard tank sections and works fine...what the hay!!!!
What is it about new nano kit that wont allow it to work?
On a side note, the Stillare is my new favorite RDA!!!
It Rocks on my Mech!!!
sent from my last wits using Tapatalk
Fired on my Mech though.
Noticed the O ring on the top portion of Kayfun is missing.
The one that seats the chimney top to the top cap on KFL.
Am I shorting thru the small chimney n top of Kayfun?
Sorry to ask the MVP folk, but ya all are like family.
Reassembled with standard tank sections and works fine...what the hay!!!!
What is it about new nano kit that wont allow it to work?
On a side note, the Stillare is my new favorite RDA!!!
It Rocks on my Mech!!!
sent from my last wits using Tapatalk
Last edited:
I like the looks of that button you added, are you happy with it ?
yes sir i am
Anyone know of a dripper type atty that works well with the MVP and doesn't take lots of power .
the Nimbus, you can build it single or double and it's a proven winner and around 10 to 15 bucks unless you order from F.T.....also 20mm in dia
How do you get your coil in the center? Is your positive lead longer or...?
That's how I wick my single coils on dual coil decks. Gives me the best vapor and taste production. More wick mutes both imho/ime. As to throat hit, remember that nicotine produces it too and when dripping at lower ohms you want lower nic juices.
Via spontaneous binary code
Sent from my LG-E980 using Tapatalk
just saying hi
welcome to the club
great move getting the cool lil magic box
- Status
Similar threads
