iTaste MVP v2 Owners Group

[sando7]

if anyone likes a sweet tropical fruit type flavor, this is my number 1 ADV favorite, now you don't have to make it at 40%, but it do taste fantastic at this percentage....i'm in a giving mood tonight it took me several months to perfect this recipe....let it be known that i do share the wealth.

Creamy Beach 10ml @ 40% Flavor:
Nic juice 12mg @ 50/50 mix 6ml
(Capella) Pina Coloda 44 drops
(Capella) Strawberries & Cream 24 drops
(MBV) Cotton Candy 10 drops
Sweetner 2 drops

this one is also really good and it also mixes really well with chocolate

Blu-Mango Blast 10ml @ 20% Flavor:
Nic juice 12mg @ 50/50 mix 8ml
(Capella) Blueberry Cinnamon Crumble 10 drops
(Capella) Mango 10 drops
(MBV) Butterscotch 10 drops
(MBV) Sweet Cream 8 drops
Sweetner 2 drops

 

[jandry]

@donesmokin, yeah I might have to try that. I can tell by the pic I ran the leg to its nearest screw instead of the proper direction. Ill have to play around with it. Thankfully wire is cheap and I enjoy the process. I might also experience with standard coils, nanocoils, etc..

@sando7, I love the fruity flavors, so ill keep that in mind. I suppose the best way to save money is for me to start mixing juice myself- if I keep buying from stores it will definitely be the most significant expense for vaping (if I can ever stop buying toppers). Is your flavor a strong one? (Im guessing so by the 40% flavor part). I tend to like the stronger flavors.

 

[FCastle]

New MVP owner. Ordered one from 101 vapes after seeing them recommended as a legit source on here. However, now I'm wondering if I got a knockoff. The user manual that came with it says to use the ohm meter, you have to hold both buttons down for 3 seconds. It then should display 4 different readings: ohms, voltage, puff counter, and current voltage/wattage setting. Mine displays the the ohm meter immediately when I push both buttons, and it only displays 2 readings: ohms and voltage. Is the manual wrong/out of date? I'm also having a strange issue where sometimes when I press the wattage/power button it takes a second or two to register, and occasionally the button press doesn't register at all. I might have to press it 2 or 3 times then it works normally for a while. Anyone else having this problem? I tried checking the authentication code on Innokin's website, but nothing happened the first time I entered it. Then when I try again it just says the code was already checked 2 times, 3 times, etc.

 

[sando7]

if you press the 'P' button or the 'U' button separately you get the puff counter the voltage or wattage setting....p= wattage U=voltage....if you press both at the same exact time you get resistance and then the voltage charge left in your battery

 

[sando7]

Smokes in dollars aren't that expensive here, vaping is much more. The cheapest good brand cigs cost me 11 pesos a pack, that's around 1 dollar. That's 66 bucks a month, vaping costs me 100 for starters... In pesos the difference is HUGE!!! That's why when the last time the dollar rose I went back to smoking and hence a heart attack. I know it's my health but this is going to ruin me...


Maybe it's time to buy a Reo...

if i lived where you do i wouldn't be smoking tobacco, would prob be smoking that wacky hill grown stuff instead

 

[sando7]

@donesmokin, yeah I might have to try that. I can tell by the pic I ran the leg to its nearest screw instead of the proper direction. Ill have to play around with it. Thankfully wire is cheap and I enjoy the process. I might also experience with standard coils, nanocoils, etc..

@sando7, I love the fruity flavors, so ill keep that in mind. I suppose the best way to save money is for me to start mixing juice myself- if I keep buying from stores it will definitely be the most significant expense for vaping (if I can ever stop buying toppers). Is your flavor a strong one? (Im guessing so by the 40% flavor part). I tend to like the stronger flavors.

no not strong at all the flavors mix so well together and compliment each other in a perfect way it took me several months to prefect these recipes and if they were not perfect i would not share them on the forum....give-um a try....you can mix your nic base any way you want for strong throat hit but the flavor %'s are spot on imo...and when they age a bit there even better (month or 2)

 

[-mj01-]

If I were to buy say six MVP's with the intention of either using them in the distant future or even gifting them to friends/family close to me who are looking to make the switch from smoking to vaping - would there be issues with the battery holding a charge?

For the purposes of my question, assume I've held onto them for a year or two and not used them and I've not charged them either.

 

[Capt.shay]

New MVP owner. Ordered one from 101 vapes after seeing them recommended as a legit source on here. However, now I'm wondering if I got a knockoff. The user manual that came with it says to use the ohm meter, you have to hold both buttons down for 3 seconds. It then should display 4 different readings: ohms, voltage, puff counter, and current voltage/wattage setting. Mine displays the the ohm meter immediately when I push both buttons, and it only displays 2 readings: ohms and voltage. Is the manual wrong/out of date? I'm also having a strange issue where sometimes when I press the wattage/power button it takes a second or two to register, and occasionally the button press doesn't register at all. I might have to press it 2 or 3 times then it works normally for a while. Anyone else having this problem? I tried checking the authentication code on Innokin's website, but nothing happened the first time I entered it. Then when I try again it just says the code was already checked 2 times, 3 times, etc.

All MVP's are legit. The scratch and sniff stuff is just a marketing ploy by Innokin. The book is written wrong. You only get the Resistance and Voltage when you push the two buttons together. Puff count and current Voltage is read by pushing the bottom button. As for the not working issue: three quick pushes turns it off and three quick pushes turns it back on. I believe you are turning it on and off.

Welcome to the ranks. Your going to love your majic box. Heres your sign .

 

[DingerCPA]

I had to start wrapping my coils underhand to get the legs coming out the right way for a clockwise screw down. But I'm left handed and it makes a difference, I think.

So that's why *my* coils look different - lefty here too.... donesmokin, when you say "wrap underhand", not sure what you mean. I start my wrap with a leg of the wire pointing down and start winding over the top of the screwdriver. Technically, couldn't I just "flip" the coil so that the leads are at the bottom, rather than wrap underhand? Maybe missing something here.....

 

[DingerCPA]

Sando, thanks for the recipes I don't have all the components, but I'm hanging on to give them a try down the road

 

[FCastle]

All MVP's are legit. The scratch and sniff stuff is just a marketing ploy by Innokin. The book is written wrong. You only get the Resistance and Voltage when you push the two buttons together. Puff count and current Voltage is read by pushing the bottom button. As for the not working issue: three quick pushes turns it off and three quick pushes turns it back on. I believe you are turning it on and off.

Welcome to the ranks. Your going to love your majic box. Heres your sign .

Three pushes pushes on the vape button turns it off and on. I'm talking about the small P/wattage adjustment button. Occasionally I'll hold the button down and the puff count doesn't come up, or I'll be adjusting the wattage and the button just stops working. If I hit it another 1 or 2 times it starts working again. I haven't had it happen with the voltage button, but I mostly use the wattage button.

 

[herb]

New MVP owner. Ordered one from 101 vapes after seeing them recommended as a legit source on here. However, now I'm wondering if I got a knockoff. The user manual that came with it says to use the ohm meter, you have to hold both buttons down for 3 seconds. It then should display 4 different readings: ohms, voltage, puff counter, and current voltage/wattage setting. Mine displays the the ohm meter immediately when I push both buttons, and it only displays 2 readings: ohms and voltage. Is the manual wrong/out of date? I'm also having a strange issue where sometimes when I press the wattage/power button it takes a second or two to register, and occasionally the button press doesn't register at all. I might have to press it 2 or 3 times then it works normally for a while. Anyone else having this problem? I tried checking the authentication code on Innokin's website, but nothing happened the first time I entered it. Then when I try again it just says the code was already checked 2 times, 3 times, etc.

101 doesn't sell knockoff's , they are a top notch vendor . Give yourself some time with the MVP , you will see how great it is.

if i lived where you do i wouldn't be smoking tobacco, would prob be smoking that wacky hill grown stuff instead

If your into the wacky stuff your home State of Kentucky is where it's at , might have to smoke it in either Colorado or Washington State though.

 

[Capt.shay]

101 doesn't sell knockoff's , they are a top notch vendor . Give yourself some time with the MVP , you will see how great it is.

Herb, you have been around here for a few months now. Have you ever seen or even heard of a legitimate knockoff being posted? Ever? I have been around since before the MVP2 and VV3 were introduced and I have never seen or heard of one. They simply do not exist any where.

It is just a marketing ploy by Innokin and quite frankly, it has worked very well.

 

[herb]

WOW! I LOVE that desertvapes website! Never been there before!

I DID IT! I hit the buy button at vaporengine! I got one of each! One mini and one regular! ONLY $8 each I got 2 drip tips $1.50 each, kanthal for $1.99, and Silica $0.60! Shipping was only $2.99. Ive heard people going nuts over these clearomizers. I dont have alot of gear so I want what I do have to be great so Ive done lots of research! Now that these tanks are glass, and bottom dual coil they are spectacular from everthing I read! SO EXITED!

Aspire | VaporEngine.com | VaporEngine.com

ASPIRE MINI NOVA-S BDC (GLASS VERSION) $7.95

ASPIRE VIVI NOVA-S BDC GLASSOMIZER $8.49

How do these compare to the Evod and other bottom coil models like the T3s and the like , looking to pick up a few ,

Rebuildable models only lol.

 

[herb]

Herb, you have been around here for a few months now. Have you ever seen or even heard of a legitimate knockoff being posted? Ever? I have been around since before the MVP2 and VV3 were introduced and I have never seen or heard of one. They simply do not exist any where.

It is just a marketing ploy by Innokin and quite frankly, it has worked very well.

Yes i agree , have not seen anything that attempts to be an MVP , there are some box mods that offer VV/VW like the Groove II but none look like an MVP , they are just trying to cash in on it's popularity.

I doubt Innokin ever thought it would become the monumental hit that it is and anything that popular will surely have imitators.

 

[herb]

no not strong at all the flavors mix so well together and compliment each other in a perfect way it took me several months to prefect these recipes and if they were not perfect i would not share them on the forum....give-um a try....you can mix your nic base any way you want for strong throat hit but the flavor %'s are spot on imo...and when they age a bit there even better (month or 2)

Hi Sando , i would be very interested in what recipes you have come up with , what have you tried to duplicate ? I must of missed when you talked about it , since i am just starting to do my own i need all the help i can get .

 

[herb]

If I were to buy say six MVP's with the intention of either using them in the distant future or even gifting them to friends/family close to me who are looking to make the switch from smoking to vaping - would there be issues with the battery holding a charge?

For the purposes of my question, assume I've held onto them for a year or two and not used them and I've not charged them either.

Puff or Capt Shay would know about this more than i do but if it were me i would hold off buying them if i new they would not be used for a year or so . MVP 2.0's will only get cheaper as the new incarnation gets closer to a release date , i will be looking to pick another one or two up for sure when they slowly are fazed out for a new model .

They won't be going up in price (at least i'm 99% positive they won't ) so whats the rush ?

 

[Capt.shay]

Been busy this morning, hoed the garden at sun up and then strapped on the mixing gloves.

I won't be running out of French Vanilla for a while

 

[Xtro]

Does anyone know how to dismantle the MVP2? I've had mine since March this year, but now it won't fire. It looks like the rubber insulator around the 510 connection has destroyed itself and a few bits fell out. The top of my device has 2 hex looking screws and what looks like 2 rivets near the 510 connector. Not easy to even unscrew the hex ones. If I can't repair the 510, at least I have a portable phone charger as the battery seems good, but I want to get this thing repaired first. Not sending it back for repairs as the warranty has expired. Thanks if you can help.

 

[gandymarsh]

The screws that hold the top and bottom on are torx. Not sure what size. If they look like rivets, they are probably stripped out.