Older Folks and Vaping Front Porch - Part Four

Status
Not open for further replies.

garyoa1

Ultra Member
ECF Veteran
Verified Member
Or split it up into quarts and keep the unopened ones in a cooler area out of light???
Well, problem with that is how much one uses. Usually there is an expiration date of 2 years (or less) on it. So moving it to smaller bottles would likely not matter. Or in fact opening it to move it to a smaller bottle would expose it to air and maybe even shorten it's life span. I just dunno!
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
Even the black one? I kinda want to get the black to match the mod, and the FT one comes with smoked glass. Of course, I could just get the glass to put on the Tobeco one...
That smoke they put on if it's like the Merlin scrapes right off with a razor blade. It's just sprayed on. One guy said that his Tobeco V5 had really cheap screws in it he bought an authentic KF spares kit and took care of the problem. I still can't believe they would cut corners on the screws.
 

Semiretired

Vaping Master
ECF Veteran
Sep 24, 2011
5,404
58,647
Middle Georgia
Well, problem with that is how much one uses. Usually there is an expiration date of 2 years (or less) on it. So moving it to smaller bottles would likely not matter. Or in fact opening it to move it to a smaller bottle would expose it to air and maybe even shorten it's life span. I just dunno!

But, transferring would be a one time exposure until you got around to needing that bottle??? Instead of continually opening the gallon jug everytime you mix???
 

Semiretired

Vaping Master
ECF Veteran
Sep 24, 2011
5,404
58,647
Middle Georgia
My thoughts as well, Semi. Only the "working" jug gets fresh exposure to air.

After the comments made about spoilage - I broke my remaining contents of my gallon jugs to smaller bottles. They have not developed any odor to date and maybe this will slow down the process of spoilage. I already have the jugs and I already have the smaller bottles - so why not. If I can extend the shelf life - so much the better...
 

DavidOck

ECF Guru
Supporting Member
ECF Veteran
Jan 3, 2013
21,239
178,485
Halfway to Paradise, WA
If room, I'd put 'em in the freezer.

None of the long term nic reports I'm familiar with have reported any significant change, and while not specifically addressing smell, I imagine that sense was used. Since most nic is in PG, seems to me that chilling would have to help extend its shelf life. Makes sense for VG as well, since, at least in general, lower temps slow chemical reactions. :2c:
 

garyoa1

Ultra Member
ECF Veteran
Verified Member
The problem I had with ED PG was it had a slight smell. But it was out of date by two months. And as soon as I got it, it went into the freezer still factory sealed. Never opened. Not to mention the incredibly sweet taste.
However, the PG I got here has no smell, but it's pretty darn sweet as well.
When I wrote ED and asked if the smell and sweetness was normal, got an arrogant answer that it was out of date. So, to me, their customer service really sux. There's a zillion place out there to get it. They won't be one for me.
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
That's a great idea. I'll offer him $20 that's 2 bottles of cheap vodka, I'm sure he'll jump on that. I know it's a hard job but after what he said on the phone I'd like to offer him a bullet between the eyes instead. Put him out of his misery. He gets free room and board all his gas paid for. TV internet but I will try that.
It sounds like he's doing a full time job for his room & board.
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
Paradise? I do not think so.

Whatever tourists you may have did not even put a dent to the hordes we have here. So many of them that the idiots think the highway is just a wide sidewalk.
Ugh, they leave their manners at home, huh?
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
Just saw this... interesting concept for an RDA. ....o RDA
It uses a fuse-like design for the coils. Install your wick, then plug and play. Coil availabilities are 1Ω Kanthal, 0.6Ω ohm SS, and 0.35Ω Clapton.

Also looks like it wouldn't be terribly hard to modify it for BF for your favorite squonker. ;)
The comments. Juice everywhere! Then he drowns his mod while juices the wick.
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
You probably just described it to a tee. Can't be impossible to accomplish, but I would be afraid of the price tag... No matter what it really took to build it - they would charge a fortune...
Like a pipe cleaner only with cotton or rayon?
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
  • Deleted by retired1
  • Reason: If it contains drug references, it's not permitted.

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
Heres another
ecigs-kill-tobacco.jpg
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
I got vapemail today, too! 4oz flavorings from Bill City Vapes sale, 3 60 mls of one flavoring from OSDIY from their sale. And 3 bottles of premades from the Giant Vapes sale. I goty K5 & batts from Ecigity on Wednesday. Cranked up the K5 today. [emoji7] [emoji7] [emoji7] [emoji7]
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread