Older Folks and Vaping Front Porch - Part Four

[Kenna]

bummer ... I was going to 'go back' there and get another for Janet.

They were in the Clearance section for a long time. I have 2 Nano's. I set up one of my full size with it's M tank & it looks like a Nano, but just little taller & holds more, just not so much metal to the look. I like the dual airflow styles I got from EV, too. I need to stock up on like a hundred each of the chimney & base, & fill screw Orings. I fully intend to use these things forever!

 

[Kenna]

Joy is such a beautiful, precious and all too rare, but fulfilling word.. thank you! And yes, vaping is amazing beyond my ability to express my appreciation.




Oh yes, just think back to our grand parents and their daily lives. In retrospect, just within my lifetime, I'm stunned by our technical/medical advancements! Just too sad that human nature hasn't kept pace! Survival isa b*tch for all too many through no fault of their own...



Obviously I won't be around on this earth at that point. But, my prayer/dream is that I've raised/'armed' my progeny to meet and survive the future challenges and turmoil. God bless and give them joy!

Beautiful sentiments, Johnny, I love your "heart". (pat, pat, pat, you good Daddy, you!) [emoji4]

 

[MikeE3]

Oh yes, just think back to our grand parents and their daily lives. In retrospect, just within my lifetime, I'm stunned by our technical/medical advancements! Just too sad that human nature hasn't kept pace! Survival isa b*tch for all too many through no fault of their own...

Ain't that the truth. My grandmother grew up on a farm in the "Empire" as she referred to that section of Germany. She was only allowed to wear her one pair of shoes on Sunday for going to mass. She was given kerosene from a canning jar each spring that sat in the barn all winter w/ a rusty nail for 'spring tonic'. She met her husband for the first time the day they were married.

And eventually she saw 'man' walk on the moon. Yikes!

They were in the Clearance section for a long time. I have 2 Nano's. I set up one of my full size with it's M tank & it looks like a Nano, but just little taller & holds more, just not so much metal to the look. I like the dual airflow styles I got from EV, too. I need to stock up on like a hundred each of the chimney & base, & fill screw Orings. I fully intend to use these things forever!

Yep - the KFL's are like the Timex of the vaping community ... they keep on vaping and vaping and vaping ...

 

[2legsshrt]

The Kanger STM is a good one as long as you don't tighten the chimney pieces too much then they are a b. But you can buy extra parts. Still have never had one fail. And they are just as good with kanthal as TC wires.

 

[Iffy]

Mike et al,

IMHO, all too many of many, if not most, of our citizens today fail to recall the sacrifices our fore-bearers made for us to be where we are today!

Currently being on da front porch and reminiscing 'bout our non-vaping histories, maybe we ought to sidle over to da back porch.

Although, I could rave on forever 'bout my vaping history right here!

 

[MikeE3]

The Kanger STM is a good one as long as you don't tighten the chimney pieces too much then they are a b. But you can buy extra parts. Still have never had one fail. And they are just as good with kanthal as TC wires.

Legs ... I ment to mention ... just because a couple-few of us said we're not yet into TC ... please don't stop posting your experience and comments about it. I really do look forward to your posts about the changes, gear, chips, wire, etc.

 

[MikeE3]

It's here, it's here. My vape-versary present to myself showed up 3 weeks early I couldn't be more pleased with it.

The new Radius joins my Provape family. It's topped w/ a nano-R91%. The finish of the R91 and satin of the Radius match well. The P3 and mini are topped w/ OEM Kayfuns.

 

[Robert Cromwell]

It's here, it's here. My vape-versary present to myself showed up 3 weeks early I couldn't be more pleased with it.

The new Radius joins my Provape family. It's topped w/ a nano-R91%. The finish of the R91 and satin of the Radius match well. The P3 and mini are topped w/ OEM Kayfuns.

If you decide you can't tolerate it because of no TC I will be glad to remove it from your sight

 

[Robert Cromwell]

Legs ... I ment to mention ... just because a couple-few of us said we're not yet into TC ... please don't stop posting your experience and comments about it. I really do look forward to your posts about the changes, gear, chips, wire, etc.

Yep many of us on here do TC.
Not me though
May someday...

 

[Kenna]

Legs ... I ment to mention ... just because a couple-few of us said we're not yet into TC ... please don't stop posting your experience and comments about it. I really do look forward to your posts about the changes, gear, chips, wire, etc.

Agreed. I may not be planning on going there, but coils/Kayfuns/cotton happened!

 

[Kenna]

It's here, it's here. My vape-versary present to myself showed up 3 weeks early I couldn't be more pleased with it.

The new Radius joins my Provape family. It's topped w/ a nano-R91%. The finish of the R91 and satin of the Radius match well. The P3 and mini are topped w/ OEM Kayfuns.

It looks great!

 

[MikeE3]

If you decide you can't tolerate it because of no TC I will be glad to remove it from your sight

Noted ...

 

[Kenna]

How are the DIYer's here steeping juices? I only have a giant Crock Pot, so no go with that, but I've found that I can drop the bottle into a jar of hot water & set it on my little coffee mug warmer set on high & set the lid to the jar on top to keep the bottle submerged. It seems to be working well. The water stays hot, so I'm sure I'm getting a good steeping type temp from it.

 

[clnire]

Legs ... I ment to mention ... just because a couple-few of us said we're not yet into TC ... please don't stop posting your experience and comments about it. I really do look forward to your posts about the changes, gear, chips, wire, etc.

I agree! You are helping many of us with your experience.

It's here, it's here. My vape-versary present to myself showed up 3 weeks early I couldn't be more pleased with it.

The new Radius joins my Provape family. It's topped w/ a nano-R91%. The finish of the R91 and satin of the Radius match well. The P3 and mini are topped w/ OEM Kayfuns.

Saaawweeeetttt! Lookin good!

 

[MikeE3]

How are the DIYer's here steeping juices? I only have a giant Crock Pot, so no go with that, but I've found that I can drop the bottle into a jar of hot water & set it on my little coffee mug warmer set on high & set the lid to the jar on top to keep the bottle submerged. It seems to be working well. The water stays hot, so I'm sure I'm getting a good steeping type temp from it.

Seems like a good idea and it sounds like its working for you.

 

[FlamingoTutu]

bummer ... I was going to 'go back' there and get another for Janet.

You can give her yours.

Ain't that the truth. My grandmother grew up on a farm in the "Empire" as she referred to that section of Germany. She was only allowed to wear her one pair of shoes on Sunday for going to mass. She was given kerosene from a canning jar each spring that sat in the barn all winter w/ a rusty nail for 'spring tonic'. She met her husband for the first time the day they were married.

And eventually she saw 'man' walk on the moon. Yikes!

Similar experience on my father's side of the family. Blew his mind when they landed on the moon AND he was able to watch it on TV.

When I had the stent put in my shoulder it took a <.5" incision and went home that day. Several years earlier it would have been crack the chest, run incision up to neck, blah, blah, 5-7 days in the hospital. In 50 years they can probably do it on a lunch break with a medical tricorder. Hope they can soon do the same for some of the more terrible diseases.

It's here, it's here. My vape-versary present to myself showed up 3 weeks early I couldn't be more pleased with it.

The new Radius joins my Provape family. It's topped w/ a nano-R91%. The finish of the R91 and satin of the Radius match well. The P3 and mini are topped w/ OEM Kayfuns.

That's really nice and at least a third smaller than I thought it'd be! The Celtic Knot ones are pretty sharp.

How are the DIYer's here steeping juices? I only have a giant Crock Pot, so no go with that, but I've found that I can drop the bottle into a jar of hot water & set it on my little coffee mug warmer set on high & set the lid to the jar on top to keep the bottle submerged. It seems to be working well. The water stays hot, so I'm sure I'm getting a good steeping type temp from it.

Tie it to inside of dog collar and toss Frisbee. I know, no help. I thought about getting a sonic cleaner but then found nothing I make improves much after sitting and occasional shaking for 24 hours. Cup warmer idea is genius, I'll have to remember it if I venture beyond one or two flavors.

 

[bigbells]

They were in the Clearance section for a long time. I have 2 Nano's. I set up one of my full size with it's M tank & it looks like a Nano, but just little taller & holds more, just not so much metal to the look. I like the dual airflow styles I got from EV, too. I need to stock up on like a hundred each of the chimney & base, & fill screw Orings. I fully intend to use these things forever!

EHPro Kfun 2 Lite Nano here for $18.75 and free shipping, after applying 25% off discount code SUMMER15. http://www.rockymountainvapor.com/index.php?main_page=product_info&cPath=100_110&products_id=313

I wonder if they'll still have SUMMER15 as the discount code when January comes around.

How are the DIYer's here steeping juices? I only have a giant Crock Pot, so no go with that, but I've found that I can drop the bottle into a jar of hot water & set it on my little coffee mug warmer set on high & set the lid to the jar on top to keep the bottle submerged. It seems to be working well. The water stays hot, so I'm sure I'm getting a good steeping type temp from it.

The only thing I ever use for steeping is a chronometer.

 

[Robert Cromwell]

Kayfuns have polycarb tanks????

 

[Janet H]

How are the DIYer's here steeping juices? I only have a giant Crock Pot, so no go with that, but I've found that I can drop the bottle into a jar of hot water & set it on my little coffee mug warmer set on high & set the lid to the jar on top to keep the bottle submerged. It seems to be working well. The water stays hot, so I'm sure I'm getting a good steeping type temp from it.

That's a clever way to steep. I don't steep ours since we went to fruits. Those don't need steeping.

 

[Robert Cromwell]

That's a clever way to steep. I don't steep ours since we went to fruits. Those don't need steeping.

If you do any banana it is much better steeped for at least 2 weeks. The only fruit I have noticed this with.